OGO 2 User Manual
O G O 2 Use r Ma nua l ii
錯誤! 尚未定義樣式。 This Page should have any Legal Notices, copyright information, disclaimers etc Even though there is the Warrantee section at the end iii
O G O 2 Use r Ma nua l Table of Contents I n t r odu cing t he Ogo ....................................................................... 1 Feat ures ................................................................................................. 2 Accessor ies ............................................................................................. 2 Ge t t ing St a r t e d...............................................................................
錯誤! 尚未定義樣式。 Sending an I nst ant Message .................................................................... 28 Ad ding Emo tic o ns to Yo ur Insta nt Me ssa g e s .................................. 29 Receiv ing an I nst ant Message .................................................................. 29 Closing an I M Chat Session...................................................................... 30 Managing Your I M Cont act s .....................................................................
O G O 2 Use r Ma nua l Handling Mult iple Calls ............................................................................ 48 Ma king a no the r C a ll While Ta lking o n the Pho ne ........................... 48 Re c e iving a no the r C a ll While Ta lking o n the Pho ne ...................... 48 Swa p p ing C a lls .................................................................................... 49 Jo ining C a lls (C o nfe re nc ing ) .............................................................
錯誤! 尚未定義樣式。 Work ing wit h Bookm arks......................................................................... 68 Ad ding a Bo o kma rk ............................................................................ 69 Re mo ving a Bo o kma rk ....................................................................... 69 Ad ding a Fo lde r................................................................................... 69 O p e ning a Bo o kma rk.................................................................
O G O 2 Use r Ma nua l Exp o sure to Ra dio Fre q ue nc y (RF) Sig na ls ....................................... 97 SAR Info rma tio n ................................................................................... 98 W a r r a nt e e a nd Condit ions ............................................................
錯誤! 尚未定義樣式。 ix
O G O 2 Use r Ma nua l x
錯誤! 尚未定義樣式。 Introducing the Ogo Ogo is an easy-to-use handheld device which offers a variety of mobile communication methods including e-mail, instant messaging, SMS, RSS, voice and Web browsing. Ogo's interface and functionality were designed to enhance Web2.0 usability featuring a high resolution screen, built-in stereo speakers and external memory slot for an optimal visual/audio experience.
O G O 2 Use r Ma nua l Features The key features of your Ogo include: Te xt a nd Insta nt Me ssa g ing : Dash off a quick text message or connect with contacts on your ICQ or MSN Instant Messenger lists. Ogo's finger friendly full-featured keyboard makes it fast, efficient and easy. E- m a il Anywhe re : Download and reply to email from multiple accounts.
錯誤! 尚未定義樣式。 Getting Started Before you can begin to enjoy your Ogo, you need to insert the following components into the device: SIM card Battery Micro SD card (optional, for additional storage space) It is then recommended that you fully charge the battery. Installing the SIM Card, SD Card, and Battery Before you use your Ogo, you need to insert the SIM card and battery into the device. If you choose to use a Micro SD card with your Ogo, it should be inserted at the same time.
O G O 2 Use r Ma nua l Fig ure 3: Installing the SIM C ard 3 (Optional) If you want to use a Micro SD card with the device, insert the SD card in the SD card slot. 4 Now, with the battery label facing up, match the battery contacts with the contacts in the battery slot. Push the battery in, contactsside down first (Figure 4). Fig ure 4: Inse rting the Batte ry 5 Push the other side down to slide the battery in until it clicks into place.
錯誤! 尚未定義樣式。 Fig ure 5: C lo sing the Bac k C o ve r Charging the Battery The first time you charge the battery, it is recommended that you charge it for 8 consecutive hours. ► To c ha rg e the b a tte ry: 1 With the battery properly installed, connect the charger’s power plug to the charging socket on the front of your Ogo. 2 Plug the AC adapter into an electrical outlet. While the battery is charging, the battery charge level icon flashes, indicating that the battery is charging.
O G O 2 Use r Ma nua l No te : The approximate remaining percentage of battery power is listed in the System tab of the Settings screen. Identifying the Low Battery Warnings When battery power becomes low, a Ba tte ry Lo w pop-up message appears. When this happens, charge your Ogo as soon as possible. If the battery level becomes critically low, the Ba tte ry Lo w! pop-up message appears. In this case, you must shut down the device and recharge its battery.
錯誤! 尚未定義樣式。 Working with the Ogo To make it easy for you to enjoy Ogo, we recommend that your take a few minutes to get acquainted with the screen, the keyboard, and a few of the general features. Interacting with Your Ogo Terminology In this manual, the following terms have been used in the instructions to describe the ways in which you interact with your Ogo: Se le c t refers to moving the focus on the screen to a tab, field, button or option. The selected option is highlighted on the screen.
O G O 2 Use r Ma nua l Powering On Your Ogo for the First Time Once your Ogo is charging (or fully charged), hold down the Power until the backlight of the screen turns on and the O g o logo is key displayed. The first time you turn on your Ogo, a setup wizard appears, ready to guide you through the initial stages of setting up your device settings. The first screen of the Messaging Wizard prompts you to select a language. Once you have set the language, you are ready to begin to use your Ogo.
錯誤! 尚未定義樣式。 External LEDs When the cover of your Ogo is closed, an external LED pane displays information about the system status, new messages, IM status, battery level, and more. Fig ure 6: LED Display The items described in the table below appear on the LED display, from left to right. Tab le 1: LED Display Ite m s Sta tus Ba r Ite m De sc riptio n Sig na l stre ng th The number of vertical bars indicates the strength of Ogo’s network connection.
O G O 2 Use r Ma nua l Status Bar Operations Area Status Bar The Ogo status bar appears at the top of your Ogo screen, and displays information about the system status, new messages, headset connection, IM status, battery level, and more. Fig ure 7: Sam ple Status Bar The items described in the following table appear on the status bar, from left to right.
錯誤! 尚未定義樣式。 Sta tus Ba r Ite m De sc riptio n Tim e Displays the current time and date. You can manually adjust the device's time and date or receive the time and date from the network. For more information, see Setting the Time and Date on page 88. Ba tte ry c ha rg e le ve l The number of vertical bars indicates the battery charge level. For more information, see Checking the Battery Power on page 5.
O G O 2 Use r Ma nua l Fig ure 8: Sam ple Se tting s Sc re e n Home Screen and Main Menu Options Ogo’s features can be easily accessed by selecting the required option from the Home screen or from the Main Menu. To display the Home screen, press . Fig ure 9: Ho m e Sc re e n To display the Main Menu, press . The options are displayed in a column on the left side of the screen. No te : The same options are available in both locations.
錯誤! 尚未定義樣式。 Tab le 3: Ho m e Sc re e n and Main Me nu O ptio ns O ptio n 錯誤! 尚未定義樣式。 Na m e Func tio n Ma ilb o x Displays the Mailbox screen, enabling you to view, sort, and send e-mail and SMS messages. For details, see Viewing Your Message Lists on page 38. C o m po se Displays the Compose screen, enabling you to compose and send an SMS message. For details, see Composing a Message on page 39.
O G O 2 Use r Ma nua l O ptio n Na m e Func tio n Extra s Displays the Extras screen, enabling you to select from various external applications, and providing technical support contact details. For details, see Ogo Extras on page 71. Se tting s Displays the Settings screen, enabling you to configure your phone, IM, Email, browser, and other device settings. For details, see Setting Your Preferences on page 73.
錯誤! 尚未定義樣式。 Navigation and Selection Keys The following keys enable you to navigate within the Ogo’s screens to select and configure the various options. Tab le 4: Navig atio n and Se le c tio n Ke y s Ke y Na m e Func tio n Se le c tio n Whe e l The outer ring of the selection wheel enables you to rotate through the various options on the screen. Rotate the wheel in a clockwise direction to move forward or in a counter-clockwise direction to move backward.
O G O 2 Use r Ma nua l Shortcut Keys Located above the keyboard, the following shortcut keys make it easy to navigate between the most commonly used features on your Ogo device. Tab le 5: Sho rtc ut Ke y s Ke y Na m e Func tio n Po we r O n/ O ff Powers your Ogo on and off. Ogo Lists all recent unread e-mail and SMS/text messages, open IM chat sessions, and drafts of messages not yet sent.
錯誤! 尚未定義樣式。 Inserting Text Using your Ogo keyboard, you insert standard text, symbols, and emoticons in the various text fields and messages. You can also take advantage of Ogo’s QuickText feature to insert predefined or customized text. For details, see Working with QuickText on page 18. No te : Depending on your region and wireless carrier, you may also able to insert non-English characters, such as accented letters and symbols. For details, see Using the Foreign Character Palette on page 19.
O G O 2 Use r Ma nua l Ke y Na m e Spa c e b a r/ Sym b o l Func tio n When pressed alone, inserts a space in text. When pressed in conjunction with ALT, displays the Symbol palette, enabling you to include special characters when composing outgoing messages. C le a r Enables you to delete the last character inserted in a text field (press once for each character), all of the text in a field (press and hold), or a selected message in a list.
錯誤! 尚未定義樣式。 Inserting QuickText You can insert QuickText into an instant message, e-mail message, or SMS/text message. ► To inse rt Q uic kTe xt: . The Options menu is 1 While composing your message, press displayed. 2 Press 1 , or select 1. Inse rt Q uic kTe xt and press Ente r. The Insert QuickText screen is displayed, listing the available QuickText messages. 3 Select the QuickText message you want to insert and press Ente r (or press the number of QuickText message item).
O G O 2 Use r Ma nua l Find MSN display name Templates Message body Address and subject Nickname, First, Last, Company, Postal Address, Notes in Contact List entries Instant messages Mailbox name, Display name ► To e nte r a n e xte nde d c ha ra c te r in a fie ld: 1 When the cursor is located in one of the fields listed above, access the Extended Character palette by long-pressing one of the keys associated with the letter you want to type: E, Y, U, I, O, A, S, D, C and N; the Exte
錯誤! 尚未定義樣式。 Checking for Messages and Open Chats With Ogo, you can check for new messages of all types and open chats in one easy step – simply press display the Ogo screen. on the keyboard to Your Ogo screen lists all recent unread e-mail and SMS/text messages, open IM chat sessions, and drafts of messages not yet sent.
O G O 2 Use r Ma nua l Instant Messaging You can use your Ogo to chat with friends and colleagues using the Windows Live Messenger and/or ICQ messaging services. No te : The availability of IM services on your Ogo device depends on the package offered by your wireless carrier/operator, and may be limited to one service or another, or neither. You can use only one Windows Live Messenger account and one ICQ account at any given time.
錯誤! 尚未定義樣式。 No te : You can use only one Windows Live Messenger account and one ICQ account at any given time. If you have already set up a Windows Live Messenger account, then you are given the option of setting up an ICQ account only. If you have already set up an ICQ account, then you are given the option of setting up a Windows Live Messenger account only. 5 Select the IM Provider (Windows Live Messenger or ICQ) and press Ente r. 6 Select Ne xt and press Ente r.
O G O 2 Use r Ma nua l 5 Select the required domain (@hotmail.com; @msn.com; or Other) and press Ente r. 6 In the Pa sswo rd field, insert your password. No te : The letters are displayed one at a time as you insert them; upon inserting the next letter the previously entered one turns into an asterisk. When you attempt to move to the next field, you are prompted to confirm that you want to store your password on the device.
錯誤! 尚未定義樣式。 When you attempt to move to the next field, you are prompted to confirm that you want to store your password on the device. 4 Select Ye s to save the password on the device or select No if you prefer to enter the password each time you sign in. Then, press Ente r. No te : If you select Ye s, a security warning is displayed advising you to go to the change your password in the event that your device is lost or stolen. Press Ente r continue.
O G O 2 Use r Ma nua l Working with the IM Screen While viewing the IM screen, the following options are available from the Options menu: 1 Change My Status 2 Send Message 3 Add a User/Contact 4 Delete User/Contact 5 Block User/Contact 6 User’s Details/Contact Info 7 Assign Alerticon 8 Disconnect/Sign Out 9 My Profile (Windows Live Messenger only) ► To a c c e ss the Insta nt Me ssa g ing sc re e n: 1 in the Home screen or Main Menu and press Ente r. The Select IM screen is displayed.
錯誤! 尚未定義樣式。 2 Select the tab for the IM service that you want to work with. When a tab is selected, the username appears on the tab, and the Contact List displays your existing contacts. No te : If no contacts have been defined, a message is displayed indicating that the Contact List is empty. To add a user, press Ente r. For details, see Adding an IM Contact on page 30. Status icons are used to indicate the messaging status of your contacts. The icons vary according to the service selected.
O G O 2 Use r Ma nua l Changing Your Status You can define the way in which your status is displayed to others in their contact lists. ► To c ha ng e yo ur sta tus: 1 Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). 2 Press 3 Press 1 on the keyboard or select 1. C ha ng e Sta tus from the dropdown menu, and press Ente r. A dropdown menu of available statuses is displayed. 4 Select the status that you want to be displayed and press Ente r.
錯誤! 尚未定義樣式。 5 Insert your message text and press Ente r. Your message is sent to the selected contact, and is displayed in the top half of the screen. Adding Emoticons to Your Instant Messages You can use a variety of emoticons to personalize your chat messages. ► To a dd a n e m o tic o n to a n insta nt m e ssa g e : Press the Em o tic o n key on the keyboard. An emoticon palette is displayed. Scroll through the palette to select the desired emoticon and press Ente r.
O G O 2 Use r Ma nua l Closing an IM Chat Session You can close an open IM chat session in either of the following ways: In the Chat screen for the open session, select 8. C lo se C ha t O ptio ns from the Options menu. In the Ogo screen, select the IM chat session and press C LR on the keyboard. Managing Your IM Contacts You can add, delete and block specific contacts in your contact list from your Ogo.
錯誤! 尚未定義樣式。 3 Press 6 , or select 6. C o nta c t Info and press Ente r. The Contact Info screen is displayed. The specific details displayed depend on the selected IM service. 4 Select Ye s and press Ente r. The contact’s status is updated in the IM Contact List; the contact is blocked and is unable to send you instant messages. Assigning an Alerticon to an IM Contact Ogo’s animated Alerticons make it easy for you to identify when some important to you has sent you a message.
O G O 2 Use r Ma nua l 2 Press 3 Press 5 , or select 5. Blo c k Use r and press Ente r. The Block User screen is displayed, prompting you to confirm that you want to block the contact. 4 Select Ye s and press Ente r. The contact’s status is updated in the IM Contact List; the contact is blocked and is unable to send you instant messages. . The Options menu is displayed. ► To unb lo c k a n IM c o nta c t: 1 In the IM screen, select the blocked contact. 2 Press 3 Press 5 , or select 5.
錯誤! 尚未定義樣式。 Signing In If you have not configured your Ogo to automatically sign you in whenever it is turned on, you can manually sign in when it suits you. Or you can sign in again, if you have signed out for any reason. ► To sig n in to the IM: 1 Open the IM screen and select the tab for the IM service (ICQ or Windows Live Messenger). You are prompted to sign in. 2 Press Ente r. A Sign In screen is displayed, listing your default sign in details.
O G O 2 Use r Ma nua l E-Mail and SMS/Text Messaging Ogo lets you manage messages from MSExchange, POP3, IMAP4, and MSN Hotmail accounts easily and efficiently, whether you're sitting in a restaurant, riding the bus, or relaxing on the beach. And Ogo's PUSH e-mail feature means you get e-mail as soon as it hits your inbox, so there's no need to wait.
錯誤! 尚未定義樣式。 2 Select the E- m a il tab. 3 Scroll down to select Add and press Ente r. The E-mail Wizard screen is displayed. 4 Select Ne xt and press Ente r. You are prompted to select the e-mail provider. No te : If you have already set up an account on Ogo for an e-mail provider, that provider is no longer available for selection. 5 Select the e-mail provider (Windows Live Mail, Gmail or Custom email provider) and press Ente r. The Mail Setup screen is displayed.
O G O 2 Use r Ma nua l 6 Insert the requested information in the designated fields. Set how often you want the Ogo to check for new mail as follows: • Select C he c k inte rva l and press Ente r. A drop-down menu is displayed. • Scroll and select the desired time interval (O FF, 10m , 30m , 1h, 2h) and press Ente r. 7 Press Ente r. You are prompted to set up another account (optional) or to finish the wizard. 8 Select Finish E- m a il Wiza rd and press Ente r. 9 Select Ne xt and press Ente r.
錯誤! 尚未定義樣式。 6 Set how often you want the Ogo to check for new mail as follows: • Select C he c k inte rva l and press Ente r. A drop-down menu is displayed. • Scroll and select the desired time interval (O FF, 10m , 30m , 1h, 2h) and press Ente r. 7 Press Ente r. You are prompted to set up another account (optional) or to finish the wizard. 8 Select Finish E- m a il Wiza rd and press Ente r. 9 Select Ne xt and press Ente r.
O G O 2 Use r Ma nua l • Outgoing Viewing Your Message Lists The Inbox tab shows a combined list of all your e-mail and SMS/text messages. The most recently received messages appear at the top of the list. Alternatively, you can view only the incoming messages of a specific type or for a specific e-mail address in the corresponding tab. For example, to view only SMS messages, select the SMS tab.
錯誤! 尚未定義樣式。 Mark as Unread Reply Reply to All Forward Delete Sort by Sender Delete All Send/Receive Composing a Message You can compose and send SMS and/or e-mail messages. ► To c o m po se a n SMS m e ssa g e : 1 In the SMS tab of the Compose window, press menu is displayed. 2 Press 1, or select 1. Ne w m e ssa g e and press Ente r. 3 Insert the recipient’s mobile number in the To field. 4 Scroll down and insert the message text. .
O G O 2 Use r Ma nua l Working with Messages You can open messages from the Ogo List or from the various tabs of the Mailbox screen. While viewing an open message, the following options are available from the Options menu: 1 Add Sender to Contacts 2 Reply 3 Reply to All 4 Forward 5 Delete 6 Delete Locally 7 Address Clipboard Opening a Message You can open and view your incoming messages on your Ogo.
錯誤! 尚未定義樣式。 OR To view the attachment content, select Vie w te xt. A pop-up message is displayed while the attachment is downloaded. The attachment is displayed on screen as unformatted text. No te : If the attachment is of a non-supported file type, an error message is displayed. Forwarding a Message Got a message that you think will interest someone else? Forward it to them. ► To fo rwa rd a m e ssa g e : 1 In the opened message screen (or in the Mailbox screen with the message selected), press .
O G O 2 Use r Ma nua l To reply to the sender and all other recipients, press 3 , or select 3. Re ply to A ll and press Ente r. The Compose screen is displayed, with the original message listed in the message area. 3 (Optional) Add to or edit the message text if desired. 4 Select Se nd and press Ente r. The Send Message? screen is displayed. 5 Select Ye s and press Ente r. A brief animation is displayed, indicating that the message is being sent.
錯誤! 尚未定義樣式。 Finding a Message The Find tab lets you search for a particular message based on a text string contained anywhere within the message, including the address, subject or message content fields. ► To find a m e ssa g e : 1 In the Mailbox screen, scroll and select the Find tab. 2 Insert the search criteria in the empty field. (The search criteria can be a partial word, whole word, phrases, numbers, and so on.) You can search for up to 32 characters (including symbols).
O G O 2 Use r Ma nua l For details, see Forwarding a Message on page 41 or Deleting a Message on page 42.
錯誤! 尚未定義樣式。 Using Your Ogo Phone As brilliant as Ogo is at text based messaging, sometimes you just need to talk to someone. The Phone screen enables you to make and answer phone calls, as well as view phone numbers previously dialed, and the calls received and calls missed lists. Dial/Answer and Hang Up For added convenience, your Ogo features Dial/Answer (green) and Hang Up (red) buttons, which are located along the bottom edge of the device.
O G O 2 Use r Ma nua l You can also make an outgoing call while an existing conversation is in progress. For details, see Making another Call While Talking on the Phone on page 48. ► To dia l a pho ne num b e r: 1 on the keyboard and then press Ente r or select in the Press Home screen and press Ente r. By default, the Dial tab of the Phone screen is displayed. Fig ure 15: Pho ne Sc re e n 2 Insert the phone number to be dialed.
錯誤! 尚未定義樣式。 No te : If the selected contact has more than one phone number stored, a symbol is included with the contact name. When you press Ente r, a list of the available phone numbers for the contact is displayed; Select the required number and press Ente r again. Handling Incoming Calls Whenever your Ogo is powered on, you can receive calls on it – whether or not the cover is open or closed.
O G O 2 Use r Ma nua l Handling Multiple Calls You can juggle multiple calls on your Ogo, freely switching between ongoing calls, or joining them into a conference call. Making another Call While Talking on the Phone You can take advantage of the Hold and New Call features to make a new phone call without ending your an existing conversation. ► To m a ke a c a ll while ta lking o n the pho ne : 1 Press 2 Select Ho ld and press Ente r. The existing conversation is put on hold.
錯誤! 尚未定義樣式。 Swapping Calls If you are engaged in two calls simultaneously, talking to one person while the other is on hold, Ogo allows you to "swap" between the calls – placing the active call on hold so that you can talk to the other person. ► To swa p c a lls: 1 Press 2 Select Swa p and press Ente r. The calls are swapped. . The Options menu is displayed.
O G O 2 Use r Ma nua l ► To m ute / unm ute a c a ll: In the C a ll tab of the ongoing call, select Mute and press Ente r. The icon is displayed. ► To m ute / unm ute a c a ll: To re-enable the microphone, select Unm ute and press Ente r. The icon disappears. Viewing Your Call Lists The Ogo stores lists of dialed, received and missed calls. Each call list entry includes the following: • The phone number called or the name of the contact if it appears in your Contacts list.
錯誤! 尚未定義樣式。 Call Timers The Timers tab displays the following timers: La st c a ll dura tio n: The duration of the last call, either dialed out or received. Re c e ive d c a lls dura tio n: The accumulated duration of all incoming calls listed in the Received calls history. Dia le d c a lls dura tio n: The accumulated duration of all outgoing calls listed in the Dialed calls history.
O G O 2 Use r Ma nua l Managing Your Ogo Contact List Your Ogo Contact Lists lets you set up, find and manage contact information for people with whom you exchange e-mail and SMS/text messages. While viewing the Contact List, the following options are available from the Options menu for a selected entry: 1 Dia l: Displays the Call screen, and automatically places a call to the selected number.
錯誤! 尚未定義樣式。 6 Im po rt fro m SIM : Enables you to import your Contact List from the SIM card memory into the Ogo device memory. No te : Your IM Contact Lists are managed separately. For details, see Managing Your IM Contacts on page 30. ► To a c c e ss the C o nta c t List: Select in the Home screen or Main Menu and press Ente r. The Contacts screen is displayed. Fig ure 16: C o ntac ts Sc re e n The All tab lists all of your contacts.
O G O 2 Use r Ma nua l 5 6 (Optional) To add an additional data field: • Select Add Field and press Ente r. A menu of optional fields is displayed. Select the desired field name and press Ente r to add it to the form. • Insert the relevant information in the new field. • Repeat for additional data fields if required. Select Sa ve & C lo se and press Ente r. The new contact is saved. Deleting Contacts You can remove contacts from your Ogo Contact List.
錯誤! 尚未定義樣式。 ► To c re a te a g ro up : 1 In the Contacts screen, press 2 Select Ne w G ro up . The New Group screen is displayed. 3 Insert name for the group, for example, family. 4 Select O K and press Ente r. A tab is added to the Contacts screen for the new group. . The Options menu is displayed. Adding Contacts to Groups You can assign a contact to one or more Contact groups.
O G O 2 Use r Ma nua l ► To vie w a c o nta c t pro file : In the Contact screen, select the contact and press Ente r. The Contact Profile screen is displayed. No te : For details on defining a contact profile, see Adding Contacts on page 53. Assigning an Alerticon to a Contact Ogo’s animated Alerticons make it easy for you to identify when someone important to you has sent you a message.
錯誤! 尚未定義樣式。 Creating a Contact from the Clipboard You can create a contact directly from within a message using the Address Clipboard. ► To c re a te a ne w c o nta c t fro m the c lipb o a rd: 1 In an open message screen, press displayed. 2 Press 7 , or select 7. Addre ss C lipb o a rd and press Ente r. The Address Clipboard is displayed. 3 Select the entry in the displayed list and press Ente r. A pop-up menu is displayed. 4 Press 2 , or select 2. C re a te Ne w C o nta c t and press Ente r.
O G O 2 Use r Ma nua l Exporting Contacts You can export specific contacts or your entire Ogo Contacts List from the device memory to your SIM card, for example, to make the contact information available on another device. ► To e xpo rt c o nta c ts: 1 In the Contacts screen, press 2 Press 8 or select 8. Expo rt to SIM and press Ente r. A pop-up menu is displayed. 3 . The Options menu is displayed. To export the entire Contact List, select 1. All Re c o rds and press Ente r.
錯誤! 尚未定義樣式。 No te : If you opt to manually resolve conflicts and conflicts are detected you are prompted to override the local entry. (Select Ye s or No , as required, and press Ente r.) Synchronizing Your Contact List If Ogo Sync is installed on your personal computer (desktop or laptop), you can connect your Ogo and manually synchronize your Contact Lists using a USB cable. For details, see your Ogo Sync documentation.
O G O 2 Use r Ma nua l Working with the Calendar Ogo’s built-in calendar enables you to manage your schedule on the go. And depending on the package offered by your cellular operator, you may be able synchronize your schedule with your calendar on your home PC using a USB cable, Bluetooth connection, or over the air. ► To a c c e ss the C a le nd a r sc re e n: Select in the Home screen or Main Menu and press Ente r. The Calendar screen is displayed.
錯誤! 尚未定義樣式。 O pe n Appo intm e nt: Opens the Appointment screen, enabling you to view and edit the appointment details. De le te A ppo intm e nt: Removes the appointment from your schedule. Sum m a ry Mo de : Displays a list of the appointments in your calendar. Da y Vie w : Changes the view from Summary Mode to Day View. To da y : Highlights the current day’s schedule on the screen. C le a n- Up : Enables you to delete appointments from your calendar.
O G O 2 Use r Ma nua l 8 (Optional) To set the priority of the appointment, select Im po rta nc e and press Ente r. Select the desired priority (Low, Normal or High) from the pop-up menu. The default priority is Normal. 9 (Optional) Insert a note in the No te field. 10 Select Sa ve and press Ente r to add the appointment to your calendar. Opening/Editing an Appointment You can view and update the appointment details, for example, if the location or time has been changed.
錯誤! 尚未定義樣式。 Deleting Old Appointments You can delete outdated appointments from your calendar. ► To de le te o ld a ppo intm e nts: . The Options menu is displayed. 1 In the Calendar screen, press 2 Select C le a nup and press Ente r. A pop-up menu is displayed. 3 Select 2. De le te O ld A ppo intm e nts to delete appointments according to scheduled dates. The Delete Old Appointments screen is displayed.
O G O 2 Use r Ma nua l Re m ind m e in: Enables you to set a time interval after which the Reminder will pop-up again. Dism iss: Closes the Reminder screen for once and for all. Sno o ze : Enables you to temporarily close the Reminder. It will pop- up again after a configured time interval. O pe n: Opens the Appointment screen. Select the desired option and press Ente r to continue.
錯誤! 尚未定義樣式。 Viewing the News To stay in touch with your world, Ogo enables you to download RSS news feeds for up to the moment news, information and alerts about the subjects you care about most. The Ogo News screen provides a simple and intuitive interface for receiving updates from web sites featuring standard RSS feed. You can monitor several feeds concurrently. ► To a c c e ss the Ne ws sc re e n: Select in the Home screen or Main Menu and press Ente r. The News screen is displayed.
O G O 2 Use r Ma nua l ► To o pe n a ne ws ite m : 1 Select the news item and press Ente r. The item is displayed, including the time, date and supplying feed. 2 To open the news item in a browser, press displayed. 3 Press 1 , or select 1. O p e n in Bro wse r and press Ente r. A connection is established with the site, and the news item is opened in the Browser screen. Scroll down to read the news item in its entirety. .
錯誤! 尚未定義樣式。 Surfing the Internet With Ogo, you can browse the web from practically anywhere. ► To o pe n the We b b ro wse r: Select in the Home screen or Main Menu and press Ente r. The Browser screen is displayed. When the connection is established, a Google search page appears. Fig ure 19: Bro wse r Sc re e n While browsing the Internet, the following options are available from the Options menu: 1. G o to URL: Enables you to open a specific web page. For details, see . 2.
O G O 2 Use r Ma nua l 7. Pro pe rtie s: Displays your default browsing properties, including page title, address and page size. Typically, these are preconfigured by your cellular carrier and cannot be edited. Searching the Internet Using the Google website, you can use your Ogo to search for information on the Internet. ► To se a rc h the Inte rne t: 1 In the Browser screen, insert search criteria in the Google search field. 2 Select Find and press Ente r.
錯誤! 尚未定義樣式。 Adding a Bookmark You can create a bookmark to any web page that you expect to visit frequently. ► To a dd a b o o km a rk: 1 While viewing a page in the Browser screen, press menu is displayed. 2 Press 4 , or select 4. Add to Bo o km a rks and press Ente r. The Add to Bookmarks screen is displayed. . The Options The screen name and URL of the currently displayed page are inserted automatically. 3 (Optional) Insert/edit the screen name. 4 Select O K and press Ente r.
O G O 2 Use r Ma nua l 4 Select O K and press Ente r. The folder is added in the Bookmarks screen. Opening a Bookmark Selecting a bookmark is a fast and easy way of opening a webpage. ► To o pe n a pa g e using a b o o km a rk: 1 In the Browser screen, press 2 Press 5 , or select 5. O pe n > 1. Bo o km a rks and press Ente r. The Bookmarks screen is displayed. 3 Select a bookmark and press Ente r to display the corresponding webpage. . The Options menu is displayed.
錯誤! 尚未定義樣式。 Ogo Extras The Extras screen provides access to any additional applications available on the device, such as Ogo Blocks, as well as to the contact details for technical support purposes. ► To a c c e ss the Extra s sc re e n: Select in the Home screen or Main Menu and press Ente r. The Extras screen is displayed. Fig ure 20: Extras Sc re e n The Extras screen includes two tabs: Applic a tio ns: Lists any pre-installed applications available on the device.
O G O 2 Use r Ma nua l ► To pla y O g o Blo c ks: 1 In the Application tab of the Extras screen, select O g o Blo c ks and press Ente r. 2 Use the game control keys to control the movement of the falling blocks.
錯誤! 尚未定義樣式。 Setting Your Preferences You can configure various settings for your Ogo, including the default methods for handling calls, IM, and e-mail messages on the device. Your preferences are defined in the following tabs of the Settings screen: Pho ne : Enables you to configure settings related to your Ogo phone functionality. For details, see Setting Your Phone Preferences on page 74. IM : Enables you to configure your IM accounts settings.
O G O 2 Use r Ma nua l ► To a c c e ss the Se tting s sc re e n: Select in the Home screen or Main Menu and press Ente r. The Settings screen is displayed. Fig ure 21: Se tting s Sc re e n Setting Your Phone Preferences The settings configured in the Phone tab determine how your Ogo responds to various calling conditions. ► To se t yo ur pho ne p re fe re nc e s: 74 1 In the Settings screen, select the Pho ne tab. 2 Select and edit one or more of the Phone settings, as required.
錯誤! 尚未定義樣式。 Tab le 12: Pho ne Se tting s O ptio n De sc riptio n C a ll fo rwa rding The following call forwarding options may be configured to Enable or Disable: • Fo rwa rd a ll c a lls: Ogo re-routes all incoming calls to another pre-determined number. • Fo rwa rd if b usy : Ogo re-routes incoming calls to another pre-determined number if you are engaged in an active phone call.
O G O 2 Use r Ma nua l O ptio n De sc riptio n O wn num b e r se tting This setting defines whether the person you are calling can view your phone number on caller ID-equipped telephones: • O n: Your number is displayed. • O ff: Your number is not displayed. • Set by Network: The option is set at the discretion of your cellular service carrier (usually On). Press Ente r and select your preference from the pop-up menu.
錯誤! 尚未定義樣式。 O ptio n De sc riptio n Spe e d dia l You can create shortcuts for dialing your most commonly needed numbers. To access these settings, select C o nfig ure and press Ente r to display the Speed dial screen. Insert the number(s) for which you want to use the speed dial option. Select C lo se and press Ente r. Setting Your IM Preferences Your IM account settings are configured in the IM tab. ► To se t yo ur IM pre fe re nc e s: 1 In the Settings screen, select the IM tab.
O G O 2 Use r Ma nua l O ptio n De sc riptio n Add IM a c c o unt Enables you to add an IM account. If you have already set up your IM account(s), this option is disabled. Select Add and press Ente r. The Instant Messaging Wizard is displayed. For details, see Using the Instant Messaging Wizard to Set Up Your Account on page 22. Re m o ve IM a c c o unt Removes an existing IM account. Select Re m o ve and press Ente r. The Account Summary screen is displayed.
錯誤! 尚未定義樣式。 O ptio n De sc riptio n Re m o ve e m a il a c c o unt Removes an existing e-mail account. Pe rso na l sig na ture You can insert a personal signature at the end of your e-mail messages. Select Re m o ve and press Ente r. The Account Summary screen is displayed. Clear the checkbox for the e-mail account to be removed and press Ne xt. Select O pe n and press Ente r to display the Personal Signature screen. Select Edit and press Ente r to insert/edit your personal signature.
O G O 2 Use r Ma nua l O ptio n De sc riptio n De fa ult a c c o unt When you compose an e-mail message, it is sent from your default e-mail account. (If you have set up only one e-mail account, this option is selected by default.) Press Ente r to select/clear the checkbox as required. Displa y na m e The name that appears in the Fro m field of an e-mail account that you send from this account. Se rve r na m e If you have a custom e-mail account set up, this is the server name for that account.
錯誤! 尚未定義樣式。 Tab le 16: Bro wse r Se tting s O ptio n De sc riptio n Full sc re e n Displays the browser in full screen mode. Re nde ring m o de Displays the mode for presenting content on the Ogo screen. Press Ente r and select the rendering mode (Standard, Text wrap, Screen optimized, or Text only) from the pop-up menu. Ena b le sc ripts Enables the use of scripts when browsing the Internet. Sho w im a g e s Enables the display of images when browsing the Internet.
O G O 2 Use r Ma nua l Setting Synchronization Preferences The settings configured in the Sync tab determine how the data on your Ogo can be synchronized with your personal computer. It also enables you to see when synchronization was last performed. No te : The availability of this option depends on your cellular operator. If synchronization is not supported, the Sync tab is not displayed. ► To se t yo ur sync hro niza tio n pre fe re nc e s: 1 In the Settings screen, select the Sync tab.
錯誤! 尚未定義樣式。 Tab le 18: De vic e Se tting s O ptio n Sc re e n b rig htne ss Brig htne ss pe rio d De sc riptio n The level of brightness of the Ogo screen display. Adjust the brightness by moving the indicator on the slider using the inside buttons on the 8-way selection key. The screen brightness changes immediately as you move from one level to the next. The time interval for which the screen brightness is maintained when no keys are pressed.
O G O 2 Use r Ma nua l O ptio n De sc riptio n Select O pe n and press Ente r to display the Banner Settings screen. Select when you want to allow the display of banners (new IM or SMS, new e-mail, and/or IM contact comes online), and select Do ne . Resets your Ogo device to its original factory settings, permanently removing all personal and account information (for example, if you are preparing to give the device to someone else). Re se t de vic e Select Re se t and press Ente r.
錯誤! 尚未定義樣式。 O ptio n De sc riptio n Local device name. • My de vic e s: The names of all of the Bluetooth devices that are paired with the Ogo device. • Se a rc h fo r de vic e s: An option scans the airwaves for available Bluetooth devices to connect to. Select Sc a n and press Enter; a popup window appears showing that a search is in progress. • Te m po ra ry visib ility : To protect itself from undesired contacts, the Ogo is normally "invisible" to random searches.
O G O 2 Use r Ma nua l O ptio n De sc riptio n De fa ult re m inde r The default time (in minutes) in advance to be reminded of an upcoming appointment. Press Ente r and select the desired time interval from the pop-up menu. Wo rk we e k The standard work week settings, including the starting and ending hours and the first day of the week. Select O pe n and press Ente r to display the Work week screen.
錯誤! 尚未定義樣式。 O ptio n De sc riptio n Ring to ne s Enables you to set the volume of the ringtone played to indicate an incoming call. Adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key. Syste m so unds Enables you to set the volume of the sounds played to indicate various system events. Adjust the volume by moving the indicator on the slider using the left and right button on the 8-way selection key.
O G O 2 Use r Ma nua l Setting the Time and Date When your Ogo is powered on, it automatically synchronizes with the current time from your carrier’s network. If for some reason the network is not available, you can set the time and date manually using the settings on the Time & Date tab. No te : If your network does not provide the time and date, these settings are lost if you remove the battery.
錯誤! 尚未定義樣式。 Setting Your Network Preferences The settings configured in the Network tab are typically used by your cellular operator for troubleshooting. ► To se t yo ur ne two rk pre fe re nc e s: 1 In the Settings screen, select the Ne two rk tab. 2 Edit one or more of the network settings, as required. The network settings are described in Table 22. Tab le 22: Ne two rk Se tting s O ptio n De sc riptio n Ac tive ne two rk The name of the active network.
O G O 2 Use r Ma nua l O ptio n De sc riptio n Da ta c o unte rs Enables you to view the cumulative volume of incoming and outgoing bytes. You can manually reset these counters. Select O pe n and press Ente r to display the Data counters screen. To reset the counters, select Re se t and press Ente r. Viewing Your System Settings The System tab displays the current capacities and identifying characteristics of your Ogo.
錯誤! 尚未定義樣式。 Important Safety Information Radio Frequency (RF) Energy When your device is powered on, it receives and transmits RF energy. While this device complies with U.S. regulatory requirements concerning exposure of human beings to RF energy, you always want to minimize exposure. To minimize your exposure to this RF energy, follow these procedures: Use only the antenna supplied with the device or an approved replacement.
O G O 2 Use r Ma nua l Potentially Explosive Atmospheres In rare cases, your device can emit a spark that could cause an explosion or fire. To minimize this risk, do the following: Do not use your device and do not remove, replace, or charge batteries when you are in an area with a potentially explosive atmosphere.
錯誤! 尚未定義樣式。 Be careful when putting a charged battery that is separated from the device inside a pocket, purse, or other container that may have metal objects. Follow all safety information on the battery. Do not puncture battery or place battery or device in a fire. Dispose of the battery and device in accordance with local regulations. Keep battery away from children. Only use Ogo-certified batteries and battery chargers.
O G O 2 Use r Ma nua l Device Service Bring your device, charger, or accessories to the place of purchase or to an authorized service facility if any of these items have been dropped or damaged or have been exposed to liquid/water or extreme heat. Also, bring it in for service if any of these items become very hot to the touch or do not operate normally after following the instructions. Do not disassemble the device, charger, or any accessories.
錯誤! 尚未定義樣式。 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: SOW-OGOCT25E Statement according to FCC part 15.21. Modifications not expressly approved by CMCS could void the user’s authority to operate the equipment. Statement according to FCC part 15.
O G O 2 Use r Ma nua l Danger! 96 Never use the batteries with anything other than the specifically designed equipment. Always use the battery charger provided with the device. When discarding a battery, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Never disassemble or modify the battery. The battery contains a circuit designed to enhance safety. Damaging this circuit may cause overheating, fire, or bursting.
錯誤! 尚未定義樣式。 RF Exposure Tests for Specific Absorption Rate (SAR) are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operation can be well below the maximum value.
O G O 2 Use r Ma nua l International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. *In the U.S.
錯誤! 尚未定義樣式。 This device was tested for typical body-worn operations. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the terminal, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided.
