Installation Guide

Engineering Bulletin EBA-2008-11 ECS Software Version 5.10
Feature Descriptions and Installation Guide
16
IX-59BTINF Bluetooth Interface
The IX-59BTINF Bluetooth Interface module is an optional module available for the IX-5930 and
IX-5910 IP Telephones. This is a Class 2 version 2.0 + EDR Bluetooth module. This optional
module attaches to the IX-5930 or IX-5910 circuit board and can be installed by the Iwatsu
Authorized installer.
 Headset Control Key: For convenience and visibility, Iwatsu recommends placing a Headset
Control Key in the key pattern of all telephones with a Bluetooth Interface Module.
Caution!
Changes or modifications not expressly approved by Iwatsu Voice Networks could
void the user’s authority to operate this equipment.
IX-59BTINF Technical Specifications
Model:
IX-59BTINF
Part Number:
505059
KT Compatibility:
IX-5910 IP KT
IX-5930 IP KT
Connectors:
CN902 - to the KT CN-BT
CN-GND - to the CN-
BTGND
Bluetooth Class:
Bluetooth Version:
Class 2
V2.0 + EDR
Line Condition:
300 m or less.
40 Ohm DC resistance or
less (power supplied by
KSU)
Memory:
Operation Clock:
Flash ROM = 256KB
SRAM = 64KB
30MHz
Size:
Weight:
2.2”W x 3.4”D x .16”H
3.53 oz.
Voice Packets:
HV1, HV2, HV3, EV3,
EV4, EV5, 2-EV3, 3-
EV3, 2-EV5, 3-EV5
Operating
Temperature:
32° to 104°F (0 to 40°C)
10 to 90% Humidity
(non-condensing
Power:
+3.3 V from KT
Idle = .07 W
Max = .36 W
Storage
Temperature:
14° to 122°F (-10 to 50°C)
Line Coding:
Mu-Law
IX-59BTINF (Top and Bottom)
MADE IN
REV
LOT
IX-
BTINF (US)
IWATSU AMERICA, INC.
JAPAN
01
08.07
59
CN902
ANT1
CN-GND
CN-BTPRG
Bottom
Top
DSP