Installation Guide

Engineering Bulletin EBA-2008-11 ECS Software Version 5.10

Feature Descriptions and Installation Guide

Optional Equipment Installation

Follow the instructions below to install IX-5930 and IX-5910 Optional Equipment:

IX-59BTINF Bluetooth Headset Adapter Installation

(The IX-5810 Digital Key Telephone requires the IX-58BTINF)

This unit allows the connection of an IX-5930 or IX-5910 IP Key Telephone to a Bluetooth

headset.

To add an IX-59BTINF unit to an IX-5930 or IX-5910 IP Key Telephone:

1. Turn the IX-5930/IX-5910 Telephone so that the bottom (pedestal) of the telephone is facing

up and disconnect all cords (Headset and Handset).

2. Using a Phillips head screwdriver, remove the six screws from the bottom of the IX-5930/IX-

5910 Telephone. Carefully, place the screws aside.

3. With the six screws removed, separate the upper and lower housing from the telephone.

4. Insert the IX-59BTINF CN902 connector into the CN-BT1 connector on the IX-5930

motherboard (IX-5930IPKTCU) or the IX-5910 motherboard (IX-5910IPKTCU).

PAGE 1
Engineering Bulletin EBA-2008-11 ECS Software Version 5.10 Feature Descriptions and Installation Guide Optional Equipment Installation Follow the instructions below to install IX-5930 and IX-5910 Optional Equipment: IX-59BTINF Bluetooth Headset Adapter Installation (The IX-5810 Digital Key Telephone requires the IX-58BTINF) This unit allows the connection of an IX-5930 or IX-5910 IP Key Telephone to a Bluetooth headset. To add an IX-59BTINF unit to an IX-5930 or IX-5910 IP Key Telephone: 1.
PAGE 2
Engineering Bulletin EBA-2008-11 ECS Software Version 5.10 Feature Descriptions and Installation Guide 5. When the IX-59BTINF board is connected, insert the three retaining screws (provided with the IX-59BTINF) to secure the IX-59BTINF to the IX-5930IPKTCU/ IX-5910IPKTCU motherboard. 6. Reattach the top and bottom sections of the telephone using the Phillips head screws set aside from the second step. 7. Reconnect all cords.