Installation Instructions

Installation Instructions for

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations only.

This product may be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

Feed the cord through the stem and screw the stem onto the fixture.

Install the candle tubes by slipping them over the sockets.

Install the candle followers by placing them on top of the candle tubes.

Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.

Install the shade over the lamp.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with the

construction and operation of the product and the hazards

involved.

Use minimum 90°c supply conductors.

LAMP

CANDLE TUBE

SOCKET

CANDLE FOLLOWER

SHADE

STEM

6 and 9 Light Chandelier

PAGE 1
Installation Instructions for 6 and 9 Light Chandelier GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is safety listed for damp locations only. Use minimum 90°c supply conductors.
PAGE 2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents Les fils d’alimentation doivent convenir pour 90°c. 1A 5 6 ABAT-JOUR TIGE 4 AMPOULE 3 ADEPTE DE BOUGIE 2 TUBE BOUGIE 1 DOUILLE 1 Faites passer le cordon à travers la tige et visser la tige sur le luminaire. 2 Installez les tubes de bougies par les glisser sur les douilles.
PAGE 3
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion 90°c Min. 1A 5 6 PANTALLA TALLO 4 BOMBILLA 3 SEGUIDOR DE VELA 2 TUBO DE VELA 1 ENCHUFE 1 Pase el cable a través del tallo y atornillar el tallo en la lámpara. 2 Instale los tubos de la vela por el deslizamiento de ellos en los enchufes.