Installation & Assembly

Bulbs (Not included ):1*LED*7.2W

Page 1 of (3)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

WARNING: Wires need to be connected to driver found in

canopy and should not be connected directly to power source

or a short may occur.

The fixture is designed to dim with a standard Triac

forward phase dimmer. Dimming levels will vary by

dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to inrush current wattage should not exceed 150

watts of product for a 600 watt dimmer.

PRODUCT NAME: 1LT Pendant

PAGE 1
PRODUCT NAME: 1LT Pendant Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Bracket (A) Screws(B) Mounting Screws(C) Canopy(D) Locate all hardware & components before discarding packaging A B 1.) (A) (B) (C) C D E Step1 :Remove mounting bracket from fixture and install to electrical box. (F) (G) F G H (H) 2.) Step2 :Place the acrylic from the side of the lampshade. (F) (G) (H) 3.) Step3 :Install acrylic into socket.
PAGE 3
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Socket(F) lampshade(G) Acrylic(H) Plastic Screws(E) Locate all hardware & components before discarding packaging A B 4.) C D (A) Green/Ground White/Neutral Black/Positive (D) (E) E Step4 :Adjust wire length to desired mounting height, and tighten strain relief screws to secure. Wire fixture to wires in outlet box. Green wire is for Ground. F G H 5.