User Manual
Table Of Contents
- 页 1
- 书签509C8C82 调光遥控器说明书
- 书签A048EC6E 首先非常感谢您购买本产品,它拥有通道(CH)、分组\(GP\)、精细亮度调节、 快速亮度调节以及色温调整功能。本产品使用了FSK2.4GHz无线传输功能,性能更 稳定,采用液晶显示,能让您更方便的控制摄影灯。您可以通过此说明书而轻松掌 握本产品的使用方法及注意事项。
- 书签FEFD0138 注意事项
- 书签0B1C13A8 1.本产品属电子产品的附件,有可能因环境外界因素,而造成不能使用或异常动作, 这种情况的可能性非常小。 2.长时间不使用时,请将遥控器的电源关闭,并将电池取出。 3.安装电池时极性切勿弄反,否则电池可能渗漏腐蚀性液体、发热或爆炸。 4.请勿置于高温中,如阳光直射下的封闭汽车内、控制面板等高温地方。 5.请保持干燥,勿用湿手接触产品,亦不可将产品浸入水中或暴露雨中,否则可能 无法正常使用。 6.请勿在易燃场合中使用,违反此警告可能引起爆炸或火灾。
- 书签7277837B 产品操作
- 书签BB52E86F 02.电源开关
- 书签15FB43A5 07.色温设置/确认键
- 书签498FF7E8 04.亮度快速调整
- 书签22EA087D 08.组别设置
- 书签F4525EB3 03.多功能拔盘
- 书签CC63D679 06.通道设置
- 书签D400105B 09.电池仓
- 书签28590825 05.显示屏
- 书签20A7954C 01.通信指示灯
- 书签BD47B71C GP
- 书签18A7123B CH
- 书签1D189E07 +25%
- 书签7DE60B56 CH
- 书签74B8712E 48
- 书签93EBC5CE 100%
- 书签227D1412 Tcp
- 书签8B232ADA 5600K
- 书签634DB625 A
- 书签9ADE3BD2 B
- 书签E2EA9237 C
- 书签91E6A823 D
- 书签478B4D9B E
- 书签1FD29F12 F
- 书签6226662C 01
- 书签6D868BFA 04
- 书签87685B8C 06
- 书签F4F8A560 08
- 书签76A7B9EE 03
- 书签12E81833 07
- 书签08C83FF0 09
- 书签3B85C987 02
- 书签B5643531 05
- 书签867F38CD 产品介绍
- 书签3D526F4A 类 型: 使用2.4GHz免费无线频道 通道: 48个 组别: A.B.C.D.E.F 体积: 40.7mmx13.5mmx115.7mm 重量: 45G\(含电池) 电池: CR2032-3V
- 书签0B3A39CB 产品规格
- 书签85B74116 感谢您购买本公司产品并阅读本说明书,如有任何疑问可以向当地经销商咨询。
- 书签41E95A17 1.通信指示灯
- 书签54186388 在调节参数时,通信指示灯将闪烁。
- 书签43F1786F 4.开关机
- 书签86FB281E 3.多功能拨盘
- 书签A9B8087D 直接转动拨盘,灯亮度将按1%的亮度增减。当进入通道或组别或色温设置时 转动转盘将对相应参数作增减调整。
- 书签2F7DA110 2.显示屏
- 书签206A3212 5.通道设置
- 书签5ABDD8D5 按下遥控器通道设置按键[ CH ],显示屏左上角CH标志在闪烁,此时转动多功能 拨盘,可将通信通道在1~48之间转换,按下拨盘中间键确认,遥控器要与灯通道 保持一致。
- 书签DDEE96CF 7.色温设置
- 书签0AA68963 轻按拨盘中间键,进入色温设置,此时显示屏TCP在闪烁,转动拨盘调节色温 3200K~5600K,按中间键确认或约等6秒默认当前设置。
- 书签7CB4272E 6.组别设置
- 书签DF84F4B8 按下遥控器组别设置[ GP ],进入组别设置,可将遥控器组别设置为A、B、C、D、 E、F中的其中一组,遥控器与灯组别需保持一致。
- 书签371E3524 9.更换电池
- 书签7CC4B1E7 电池仓卡扣在遥控器左下角侧边,扣出电池仓,向上 取出电池,安装新电池时请注意将电池[+ ] 极朝上摆 放,并将电池仓卡扣推回到原位。
- 书签9D1542AD 长按电源开关键[ ]约2秒,遥控器进入开机状态,在开机状态下,长按电源 键 [ ]约2秒,将关闭遥控器。
- 书签C10F3486 LCD显示屏,显示当前通道、组别、亮度、色温等参数。
- 书签BC093AB6 8.亮度快速调整
- 书签7DCB068C 轻按一次亮度快速调整键[ ],将在现有的亮度往上跃进最接近的25%、50%、 75%、100%。
- 书签C82B1D7E +25%
- 书签F5474F3C TL-1250V01.01
- 页 2
- 书签2F5D26BF Caution
- 书签085DE022 1.This product involved in electronic product accessories which may cause the failure to use of this device. But this possibility is very low. 2.Power off the device and remove the batteries during long periods of non-use. 3.The batteries should be installed correctly. Reverse polarity may cause batteries to leak corrosive liquids, heat or explosion. 4.Do not expose this product in high temperature locations, such as confined car exposed to strong direct sunlight, control panel and other overheating places. 5.Keep it dry. Do not touch this product with wet hand. Do not expose this product to water or rain, or you may not be able to use it. 6.Do not use it inflammables gas, or it may cause explosion or fire.
- 书签3CFFDA62 Operation
- 书签B37B72A0 02.Power Button
- 书签98ECD319 07. Color Temperature Adjust / Confirm
- 书签9E51EC29 04.Quick Brightness Adjust
- 书签21D99195 08.Group Setting
- 书签78001F17 03.Multi-Function Dial
- 书签1F87127A 06.Channel Setting
- 书签5CBFBCD9 09.Battery Compartment
- 书签559EFC9F 05.Display
- 书签D42E30C3 01.Indicator Light
- 书签C9771F9E Name of Parts
- 书签DC1905E9 Style: FSK2.4GHz Wireless System Channel: 48 Group: A.B.C.D.E.F Dimension: 40.7mmx13.5mmx115.7mm Weight: 45g\(with battery) Battery Type: CR2032-3V
- 书签5D8630B3 Specification
- 书签D2BAC36A Thank you for choosing product and read user manual. Should you have any questions, please contact the local dealer.
- 书签A21BD46D 1.Indicator Light
- 书签8BB18682 The indicator light will blink when changing the setting.
- 书签38FECC96 2.Power Button
- 书签A7DC965B 3.Multi-Function Dial
- 书签FBDA5D84 Rotate the dial to adjust the brightness, color temperature and channel setting.
- 书签C9764C9A 4.Quick Brightness Adjust
- 书签8753C6FF 5.Display
- 书签EA598554 6.Channel Setting
- 书签2CE05BE0 Press this button, the [ CH ] \(left top corner\) keep blinking. Rotate the dial to adjust channel between 1-48. Press OK button or wait 6sec to confirm the setting. Remote control only work with the same channel panel.
- 书签73D24F05 7.Color Temperature Adjust / Confirm
- 书签F7ED30FF Press Confirm button to adjust the color temperature, TCP keep blinking and rotate the dial to adjust between 3200~5600K. Press Confirm button or wait 6sec to confirm the setting.
- 书签D21B0043 8.Group Setting
- 书签9BFCD108 Press [ GP ] button to change the group between A/B/C/D/E/F 6 groups. Remote control only work with the same group panel.
- 书签999428D6 9.Battery Compartment
- 书签3C41618B Battery compartment is under left bottom corner of remote control. Buckle out the compartment and put the battery in. Make sure the battery positive "+" side face up. During changing the battery, please slightly pull out the compartment and take the old battery out.
- 书签14D647F8 Press power button for 2sec to turn on the power; press power button for 2sec to turn off the power during the remote power on.
- 书签95DDC370 Press this button to quick adjust brightness between 1%/25%/50%/75%/100%
- 书签27645822 HD LCD Display
- 书签56D5A5D1 Instruction Manual
- 书签4E67E218 GP
- 书签E5E9764B CH
- 书签D0F0DB93 +25%
- 书签C88CB42A CH
- 书签1401F356 48
- 书签26DED9D2 100%
- 书签F5EFA8A2 Tcp
- 书签C8B582F8 5600K
- 书签932D198F A
- 书签86B292D2 B
- 书签A1A9534A C
- 书签F1B57F06 D
- 书签95AB4250 E
- 书签9DF776AD F
- 书签3F7CCBEE 01
- 书签B34EF0B6 04
- 书签52678B60 06
- 书签D3C975E1 08
- 书签C3F75689 03
- 书签6FDFCFC8 07
- 书签AC36B8D0 09
- 书签08B6EE0A 02
- 书签E6854324 05
- 书签B7A24880 Thank you for purchasing high performance product Remote Control !Its feature include Group Setting, Channel Setting, Quick Brightness Adjust and Color Temperature Adjust. is using global free channel 2.4GHz FSK which more reliable and low power consumption display for easy to control the. Before using this product, you must read the manual and fully understand how to use it and ensure thatyou can easily handle the operation method and also use it properly.
- 书签48D3AFCA TL-1250V01.01