PRODUCTS SPECIFICATION Version1.1 BW1352-PCIE 规格书 BW1352-PCIE Specification IEEE 802.11a/b/g/n/ac 2T2R Wi-Fi Module Custom Approval Section Custom Name Department Approval Date： prepare check approve Mac 2019.06.17 深圳市中易腾达科技股份有限公司 Iton Technology Corp. 广东省深圳市龙岗区黄阁北路天安数码新城 4 栋 A 座 1302 Add.
PRODUCTS SPECIFICATION BW1352-PCIE Change Records Change the table Change NO. Date Subject And Reason Version NO. Responser 1 20-10-2017 Initial V1.0 Mac 1 17-06-2019 Modify the picture V1.1 Phil PAGE 1 OF 10 Version1.
PRODUCTS SPECIFICATION BW1352-PCIE Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.
PRODUCTS SPECIFICATION BW1352-PCIE CATALOG Change Records...........................................................................................................................1 Disclaimer and Copyright Notice................................................................................................2 1.Overview.................................................................................................................................. 4 2. Block Diagram........................................
PRODUCTS SPECIFICATION BW1352-PCIE 1.Overview GENERAL DESCRIPTION The BW1352-PCIE is a dual-band (2.4 GHz and 5 GHz) IEEE 802.11ac Draft 2×2 compliant MAC/PHY/Radio module. The device enables the development of PCIe™ 802.11ac Draft WLAN client and router subsystem solutions for all WLAN markets that can take advantage of the extremely high throughput and extended range of the Broadcom® MIMO solution.
PRODUCTS SPECIFICATION BW1352-PCIE 2.Block Diagram Figure 1: Functional Block Diagram 3.Application Diagram PAGE 5 OF 10 Version1.
PRODUCTS SPECIFICATION BW1352-PCIE 4. FEATURE Wi-Fi Key Feature • IEEE 802.11ac Draft compliant BCM4352 2x2 solution; 2.4G/5G dual band single radio,support 802.11a/b/g/n/ac; Support 20MHz、40MHz、80MHz bandwidth; Support 256QAM modulation; MIMO 2*2 technology,antenna port data rate up to 867Gbps; PCI-e interface,2 U.FL RF connector; Compact size with PCBA dimension of 50.80mm*29.85mm ; Operation temperature : 0~70 degrees C; 5.WLAN Product Specification Dimension 29.85mm*50.8mm*3.
PRODUCTS SPECIFICATION BW1352-PCIE Transmit Power 2.4G[11g: 15±2dBm, 11b:17±2dBm, 11n HT20 : 14±2dBm,11n HT40 :14±2dBm] 5G[11a:12±2dBm 11n HT20:12±2dBm, 11n HT40:12±2dBm 11ac HT80 11±2dBm] Rx Sensitivity 867Mbps:-57dBm@10% PER 300Mbps:-68dBm@10% PER 135Mbps:-68dBm@10% PER 54Mbps:-74dBm@10% PER 11Mbps:-89dBm@8% PER Data Rate Support 802.11ac 80MHz Max.
PRODUCTS SPECIFICATION BW1352-PCIE 6.2 Machine Size Map And Pin Definition Pin Name Description 1 WAKE_L Wake Up 2 VCC +3.3V +3.3V Power supply 3 COEX1 NC 4 GND Ground 5 COEX2 NC 6 +1.5V NC 7 CLKREQ_L 8 UIM_PWR refercence clock request NC 9 GND Ground 10 UIM_DATA NC 11 REFCLK- Differential reference clock 12 UIM_CLK NC Typical OUTPUT VCC_3.3V GND Connect to pin95 of BCM4360, OUTPUT GND PAGE 8 OF 10 INPUT Version1.
PRODUCTS SPECIFICATION BW1352-PCIE 13 REFCLK+ Differential reference clock 14 UIM_RESET NC 15 GND Ground 16 UIM_VPP NC 17 UIM_C8 NC 18 GND Ground 19 UIM_C4 NC 20 W_DISABLE# Connect to pin92 of BCM4360,RF disable OUTPUT 21 GND Ground GND 22 RESET_L PCI express fundamental reset OUTPUT 23 PERn0 Differential receive INPUT 24 3.3VAUX +3.3V Power supply VCC_3.3V 25 PERp0 Differential receive INPUT 26 GND Ground GND 27 GND Ground GND 28 1.
PRODUCTS SPECIFICATION BW1352-PCIE 8.Process Parameters TBD 9. Packaging Information PAGE 10 OF 10 Version1.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
