User's Manual

2 3 4 5
1201778
User’s Guide
Bluetooth
®
Cassette Adapter
We hope you enjoy your Bluetooth Cassette Adapter from
RadioShack. This cassette adapter enables you to play music
from your Bluetooth wireless technology enabled device
through your home or vehicle cassette player. Please read this
user's guide before using your cassette adapter.
Package Contents
• Bluetooth Cassette Adapter
• 2.6 ft. (0.8m) Micro USB charging cable
• User’s Guide
Specifications
Input Voltage .................................................................................. DC 5V
Battery Capacity ...................................................................... 300mAh
Charging Current ........................................................................ 180mA
Battery Charge Time ................................................. approx. 3 hours
Operation Time ............................................................... Up to 6 hours
Working Distance .............................................. approx. 16 feet (5m)
Bluetooth Protocol ................................................................V2.1+EDR
Frequency Response ..................................................100Hz – 10kHz
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
Charge Your Cassette Adapter
Using the supplied charging cable, connect your cassette
adapter’s Micro USB charging port to a USB charger (not
included) to charge the cassette adapter.
• The LED lights red when charging, and turns off when fully
charged.
• Charge your cassette adapter when the LED fl ashes red.
Pairing Your Device
1. Press and hold the ON/OFF button for 3 seconds to turn
on the cassette adapter. While searching for Bluetooth
devices, the LED fl ashes blue and red.
2. Activate your device’s Bluetooth function (refer to your
device’s user’s guide).
3. When your device locates RadioShack BT Cassette
Adapter, select it. When paired, the LED fl ashes blue.
Note:
• If prompted for a PIN, enter 0000.
• The cassette adapter automatically turns off if no devices
are found in 7 minutes.
Changing Bluetooth Devices
Your cassette adapter automatically remembers the most
recently paired device. To change a device, you must fi rst
disconnect the fi rst device.
To disconnect the paired device, disconnect the cassette
adapter using your device’s Bluetooth controls. The adapter
starts searching for another Bluetooth-enabled device.
Use Your Cassette Adapter
1. Insert the cassette adapter into your home or vehicle
cassette player.
2. Turn on the audio source and the cassette player.
3. To turn off the cassette adapter, press and hold the ON/
OFF button for 4 seconds. The LED fl ashes red once.
Note:
• Cassette player mutes playback when answering calls and
resumes playback when call ends.
• Insert the cassette adapter properly, with “THIS SIDE UP“.
• If you are using an auto-reverse cassette player, set it to
play side A.
• Keep all magnetic heads clean.
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the
environment by restricting specifi c
hazardous materials and products.
06A16
1201778
Printed
in China
© 2016 General Wireless Operations Inc.
All rights reserved. RadioShack is a registered
trademark used under license by General Wireless
Operations Inc. dba RadioShack.
www.radioshack.com
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your equipment. Changes or modifi cations not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Limited Warranty
Go to www.radioshack.com/help for details.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
LED
ON/OFF
POWER
DISC
TUNE
TRACK
SEEK
POWER
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by General Wireless Operations Inc. dba RadioShack is
under license.
1201778 UG_EN.060116.indd All Pages 6/1/2016 6:24:13 PM