KOLX1 User Manual 20110613_KOL_ENG_SS
Table of Contents 1 Safety Precautions···········································································································4 2 Your Mobile Phone ·········································································································5 2.
6.7.3 Alarm ····················································································································17 6.7.4 World clock ···········································································································17 6.7.5 Notes ·····················································································································17 6.
1 Safety Precautions Read and abide by the instructions set forth as below to avoid dangers or violation against the law. Drive safely at all times Do not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refueling Do not use the phone at a refueling point (service station) or near fuels or chemicals. Switch off in an aircraft Wireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.
2 Your Mobile Phone Our company reserves the right to make modifications to the contents of this manual without any prior notices. 2.1 Keys and functions Name Center key Functions Enter the main menu interface Right soft key Enter the phonebook; carry out the corresponding operations displayed on the right bottom of the screen. Left soft key Enter the main menu interface; carry out the corresponding operations displayed on the left bottom of the screen.
“Invalid SIM” –in the case you log on other networks, you can only dial emergency. ”Searching” –mobile phone will search until proper network access is found. 3.2 Assembling of battery and SIM card Before your can operate the mobile phone, you should get a valid SIM card from the service operator, otherwise, you could not make any call except emergency call. 1) Assemble SIM card This mobile phone supports one SIM cards. Insert one SIM cards to the sockets.
3.4 Battery Recharge Connect the battery charger to a power supplier, plug the connector of the battery charger into the mobile phone. Then the power level indicator at upper right screen will flash. If the phone is off when charging, the screen will display “charging” indicating the battery is being charged. If the phone is deposited for long time, the power indicator may take some time to appear on the screen.
4.3 PUK number In order to unlock the blocked PIN number, you need to input PUK number (Personal Unlocking Key). 4.4 Mobile phone password In order to prevent unauthorized user from using your mobile phone, you can set a password to protect your mobile phone. If you select this function, you need to input the password every time when starting up your phone. Otherwise, you cannot unlock your phone, and cannot dial or answer phone calls. Also, your can deactivate this password.
options in the current list to select the number. Domestic number: zone code + tel. number + dial key An extension to a fixed phone: zone code + switchboard number + “P” + extension number + dial key (Input “P” as below: press the key “p”) International fixed number: “+” country code + telephone number + dial key (Input “+” press “+” key) When inputting the numbers to dial, you can proceed with the following operations: Press the “del” key to delete the character before the cursor.
support. 5.1.5 Volume control After connected to call, adjust the volume by pressing up key and down key. 5.2 Input text This mobile phone supports English and Spanish input, providing you with multiple input methods: letter input, numeric input, symbol input, etc 6 Main Menu 6.1 File Manager File Manager manages the memory space of the mobile phone and the T-flash card. Access the files stored on a T-flash card. This menu is only available when you insert a T-flash card into the phone. 6.
the cursor, it will immediately display all records according to your conditions Under abc input status, input “a”,it displays all records with “a” as first letter like “amy”, “andy” etc; input “n”,it displays all records starting with “an”, like “andy”; Under id input status, input “a”,it displays all records with “a” as first letter like “amy”, “andy” etc; input “n”,it displays all records starting with “an”, like “andy”; Press # key to switch into numeric input You can also select search cont
Incoming calls: You can select to reject all incoming calls, or incoming calls when roaming. Cancel all: cancel all option settings. When carrying out the operations for these options, it is required to forbid password operations. Change barring password: You need to input the old password. Line switching: switch between line 1 and line 2. It is up to the network service provider if you can make calls on line 2.
To, CC and BCC:you can input the telephone number or email address via numeric keys; Subject: edit the subject for the multimedia message; Contents: Edit the contents of the multimedia message. During the edition, you can select different input methods via options, and you can also select to insert pictures, sound, movies or other attached files; After editing the multimedia message, with the screen prompts, you can select “Done” to send the multimedia message.
The following operation can be carried out after reading message: View, Resend, Edit, Delete, Delete all 。 Sent messages Store the sent messages, including SMS & MMS Delete messages Can delete from Inbox, Drafts, Outbox, Sent messages; or delete All messages. Broadcast Message Please contact your network service provide for this function, and you need to set language and subject.
Set the default storage position of short messages (SIM or phone). Preferred Connection Set the prefer connection to GPRS / GSM or GSM only Multimedia Message – This includes MMS settings Data account Set the MMS data account Common settings Set Compose, Sending, Retrieval, Preferred storage and Memory status Service Message Setting for service message, enable push and enable service loading 6.6 Multimedia 6.6.
blue, color invert. Storage: select to store the photo to phone or memory card Restore default:Restore the settings of the camera to the initial state 6.6.2 Image Viewer Browse all the images stores in the phone and the T-flash card. 6.6.3 Video recorder Recording video via the phone camera.
Stop: by pressing Down Key Shift Music: by pressing the Left and Right direction keys Sound Volume Adjustment: by pressing the “+/-” Keys Press the center key or use to select ”options” in the playing list, and you can see such options as: Play, Details, Add to Ringtones, Refresh List, and Settings. 6.6.6 Radio FM You need to plug in earphone to use this function.
according to your preferences and operation habits. You can see the following setting options in the phone setting interface Time and Date; you can set city, time and display format. Schedule Power ON/Off: You can set 4 auto power on/off times. In default settings, the function is off. Language: set the language displayed in the screen of your mobile phone.
6.9 User Profiles You can select different modes on different occasions to carry out the personal settings in the environment modes such as ring tone, vibration, volume, etc. This function makes it possible to get adjusted to different situations without changing the ring tone settings at multiple places, and you only need to switch to the pre-set environment mode.
6.11 Services Internet service For network connection. You want to make the right choice set, and then enter the appropriate URL to access the network Services This feature is provided by your network service provider. Depending on the SIM card services, new menus or options may appear. Use a variety of additional services offered by your service provider. Data account WAP data account settings 6.
The standby time is associated with the network system setup. Shorter standby time In this case, you are possibly in place with poor communication. When the signal is not available, the phone will continue to search for the base station. This will consume a lot of battery power, making standby time much shorter. To continue to use, move to a place with strong signal, or shut down the phone temporarily; Replace the battery with a new battery.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.