406 User Manual
Notice ● Thank you for purchasing this product. ● Please take time to read and understand the instruction manual carefully. ● Please keep the manual in good condition for future reference. ● This product is suitable for AC 100V-240V voltage environment. ● Do not leave the unit unattended when the power is on. When the product is in standby, mode,remove the device socket and disconnect the power supply. ● Do not operate this unit if the power supply or plug is damaged.
Panel Overview Player control Seat control button Stereo and seat The power switch Wireless charging The socket speakers USB-A USB Music playing With charge USB-C Safety protection button (located under the protection cover) Headphone jack The socket cover Buttons and Functions Icon Function Function Icon Function Power Seat open Heat Bluetooth Seat close Massage Pause/Play Seat reset lights on/off volume - Headrest open A power outlet volume + Headrest close prev song Lumbar open
Instructions >> Plug the product into an available household electrical outlet. >> Aim your phone’s wireless charging receiver at iTable406 and lay it flat on top. If the device does not respond, move the mobile phone until the receiver is aligned . >> Push the slider in the middle direction to directly use the power socket (CN, US, UKCA, CE, AU optional), USB-A charging and USB-C charging. >> Long press to power on the audio and seat control system.
Instructions >> Touch and hold to open the headrest. >> Touch and hold to close the headrest. >> Touch and hold to open the waist. >> Touch and hold to close the waist. >> Touch to turn on/off the sofa heating function. The system operates for 60 min by default, and automatically shuts down after 60 min. >> Touch to turn on/off the sofa massage function. The system works for 30 min by default and automatically shuts down after 30 min. >> Touch to turn on/off the LED light function.
Product parameters Input AC 100~240v Rated power 120W Audio input DC 13V Sounds power 17W Sound response frequency 40~22 KHZ ≥ Signal to noise ratio Bluetooth version 65 db 5.0 Seat control system input DC 29V Seat control system power 120W USB output A+C MAX 18W Max 5V1A each Wireless charging output AC 100~240V 8A Socket output Product model and functions Product model & Functions Product NO. Functions Product NO.
Common troubleshooting Problem/Issue Possible causes and solutions 1. The power supply is not connected 2. The cable is disconnected or the plug is not properly inserted. No Power 3. The connected socket is faulty. 4. The safety switch flips. After pressing the safety switch, start again. No sound 1. The volume may be set to the minimum setting. Turn up the volume and try again. 2. Enter the pause mode. Press to continue. 3. The audio source does not match the playing mode.
Quality Assurance ● The terms of service will not affect your legal rights and interests in any way. ● The warranty period of this product is 24 months. (The date of delivery will begin this shall period .) ● You can confirm the date of manufacture according to the barcode on the product. If the barcode is damaged or lost so that the date of manufacture cannot be traced back, it will be deemed to be beyond the valid warranty period.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 18 and Part 15 of the FCC Rules.