GET CONNECTED Installation & Operation Manual HANDS-FREE BLUETOOTH MEDIA INTEGRATION KIT TranzIt BLU HF ISFM2351 Perfect for ANDROIDTM Note to Readers, The information contained within the following documentation is subject to change without notice. Features discussed herein may be revised and/or updated to reflect mobile device compatibility fixes, as well as firmware revisions.
Table of Contents Pages 1. Introduction 2 2. Contents 2 3. Installation 2-4 I. Microphone 2 II. Control Button 2 III. Wiring 2 A) Vehicles without Aux input (Option A) 3 B) Vehicles with Aux input (Option B) 3 IV. Dipswitch Configuration 4 V. LED info 4 4. Phone Setup 4-5 I.Bluetooth Pairing 5 II.Smartphone Application 5 5. User Operation 5 Controlling your Smartphone via the TranzIt BLU HF 5 6. Troubleshooting 6-8 I.
TranzIt BLU HF 1. Introduction Thank you for purchasing the iSimple ISFM2351 as your smartphone connection solution. TranzIt BLU HF uses a Bluetooth connection to route your calls through your vehicle for a great hands-free calling experience. Answer incoming calls or launch VR to access your smartphone’s functions at the press of a button, without handling your phone. Enjoy your favorite music without the hassle of wires cluttering up your vehicle.
TranzIt BLU HF Antenna Connectors (used for option A) 3.5mm Connector (used for option B) Red Wire 12V + Acc.
TranzIt BLU HF IV. Dipswitch Configuration Normal operation does not require any configuration of the dipswitches. All 4 dipswitches should be in the ON (down) position. Additional dipswitch configuration information is available at the end of the troubleshooting section of this manual. 1 2 3 4 V. LED Info ISFM2351 has three LEDs inside the module, which can be viewed through the hole on the rear of the metal housing.
TranzIt BLU HF II. Smartphone Application TranzIt BLU HF has a smartphone application designed to provide access to additional settings and features. Download the App for free for your iPhone from the iTunes App Store, or for your Android smartphone in the Google Play market. The TranzIt BLU HF app will enable you to change the frequency used by the module to play back your streaming audio and phone calls through your vehicle.
TranzIt BLU HF 6. Troubleshooting Issue: No audio from the phone through the car. Resolution: Press and hold the Control button for 6 seconds to engage the ISFM2351 for music streaming. Check for secure connections to the radio, antennas, or 3.5mm.
TranzIt BLU HF Issue: Control button is connected correctly (section 3), but does not function Resolution: Once confirmed that the Pink wires are securely connected, and the black wires are securely connected, and the harness has been connected to accy power and ground in the vehicle, then continue with these steps to learn the control button value.
TranzIt BLU HF I. Additional Dipswitch Configurations If the need arises to reset the module, or learn the value of the control button, there are several dipswitch configurations that will be used: Learning Mode: 1, and 3 ON (down) Used to program the value of the control button. (this is not typically needed) Note, it may take around 10-15 seconds for the module to enter learning mode, after power is connected.
TranzIt BLU HF 7. Warranty Information One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship.
For best performance, have it professionally installed. A division of AAMP of America™ 13190 56th Court Clearwater, Florida 33760 Ph. 866-788-4237 support@iSimpleSolutions.com ©2013 AAMP of Florida, Inc. www.iSimpleSolutions.