Q8 Max 1000W SMART CHARGER Instruction Manual
Thanks for purchasing the ISDT Q8 Max Smart Charger. Please visit: www.isdt.co for more details on the functions of this smart charger, as well as purchase various accessories. Functions of products will be kept on upgrading, the manual in your hand may be different from the actual operation, please refer to the actual functions. For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
Product Specifications Input BattGo: Support Output BattGo: Support Abnormal voltage alarm: Support Incorrect cell count setting alarm: Support Working temperature: 0℃~40℃ Storage temperature: -20℃~60℃ Dimension: 95×95×45mm Weight: 290g Model No: Q8 Max Input voltage: DC 10~34V Output voltage: DC 1~34V Max. input current: 33A Charging current: 0.2~30.0A Discharging current: 0.2~3.0A Max. charging power: 1000W Max. discharging power: 30W Balance current: 1.
Preset Battery Type of Charger and Task Parameters NiCd/MH Pb LiFe Lilon LiPo LiHv Rated voltage 1.20V 2.00V 3.20V 3.60V 3.70V 3.80V Full charge voltage 1.40V 2.40V 3.65V 4.10V 4.20V 4.35V 3.30V 3.70V 3.80V 3.85V Storage voltage Discharge voltage 1.10V 1.90V 2.90V 3.20V 3.30V 3.40V Preset voltage 0.90V 1.80V 2.60V 2.90V 3.00V 3.10V Supported cell count 1~16S 1~12S 1~8S 1~8S 1~8S 1~7S Max. charging current 30.0A 30.0A 30.0A 30.0A 30.0A 30.
The reference relation between C value and charging time: charging time ≥60 minutes/ charging C value (e.g. it needs around 60-70 minutes to complete charging with 1C). Due to differences in battery conversion efficiency, the time to complete the charging might be extended.
Destroy Connect the battery to be scrapped, and select the scrap function in task options, which is capable to discharge the battery to 0V. Current setting range: 0.2~3.0A The battery type and cell count are auto set accordingly when connecting with BattGo battery. DC Power supply The charger can be used as a DC power supply when choosing this function, with adjustable voltage 2~30V, and current 1.0~5.0A. The battery type, parameter and current are not optional in this task.
System Setting Menu Under the standby interface, long touch the touch board to enter the system setting menu: Min. input voltage protection 10~31V: All tasks in operation will be stopped at once and hint warning of low voltage, when the input voltage is lower than the input voltage as set up. It will protect the battery from being discharged when using battery pack as power supply. Max.
