FCC TEST REPORT Report No.: EMC-FCC-R0111 http://www.emc2000.co.kr User manual EMC compliance Ltd. 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval.
'ISAW EXTREME' USER MANUAL Ver.1.
1. Names of each part 2. Operation & button description - ISAW EXTREME is operated by three buttons (Button #1,# 2,# 3) - Button #1 means 'POWER / REC. / SELECT'. - Button #2 means 'SETUP / QUICK SETUP / UP'. - Button #3 means 'MODE / ZOOM / DOWN' - The definition of each button is as below table. Function Button Description Power On / Off #1 Press the POWER button and hold for 2 seconds * If Auto Power off is set, the camera will automatically shut down in 3 minutes when there is no operation. REC.
3. Start the camera 1) Open the battery cover and insert ISAW Li-ion battery. 2) Open the battery cover and insert Micro SD card (The camera does not record when there is no Micro SD inside) 3) Press the POWER (#1) button and hold for two seconds. The camera turns on and LCD monitor shows camera image. 4. LCD screen shot Video screen No.
options Record consecutive videos files of setup time continuously. (1min/5min/10min/30min) Press shutter button to stop. Recording automatically stops in setup time. Captures each image of setup time and save as video file. (1sec/3sec/5sec/10sec/30sec) Press shutter button to stop.
4) In setting option, press UP / DOWN (#2, #3) button to choose setting option. 5) Press SELECT (#1) button to confirm setting option.
- Photo quick setup screen - Press QUICK SETUP (#2) button to go to quick setup - Select image size - Use UP / DOWN (#2, #3) button to choose option - Press SELECT (#1) to confirm setting option 9. User setup menu - User can select basic settings and detailed setting options through user setup menu 1) Press SETUP (#2) button and hold for 2 seconds to enter user setup menu 2) User setup menu is divided into four categories (video, photo, effect, settings) 3) Press UP (#2) button to move category.
TV Out Time Format Default Setting Auto LCD Off Auto Power Off Info NTSC / PAL Set current time (YYMMDD:HHMM) Yes / No Memory card format Yes / No Turn back all settings to default Yes / No LCD will automatically turn off in 30sec when there is no operation YEs / No The camera will automatically turn off in 3min when there is no operation. Shows current firmware version 10. Playback mode - Press MODE (#3) button and hold for two seconds to change to playback mode.
- Thumbnail of photo files. Select the file to display. - Press UP / DOWN (#2, #3) button to use control panel - Press SELECT (#1) button to select - Photo playback - Press UP / DOWN (#2, #3) button to use control panel - Press SELECT (#1) button to select 11. Smartphone control - Utilizing WiFi function of ISAW EXTREME, user can control the camera through smartphone. - Compatible with iOS ver. 5.0 or better, Android OS Jelly Bean or better.
- 'ISAW Viewer' is not connected to ISAW EXTREME. - Setup WiFi connection between the camera and the smartphone. - Enter 'Setup' of smartphone. - Select 'iCam_xxxxxx' in WiFi setting.
- Run 'ISAW Viewer' application in smartphone. - Click 'Connect' button in application to connect ISAW EXTREME. - Smartphone screen will display live screen of the camera. - Control the camera through the control panel of smartphone application. - Show LIVE screen display - Start/Stop video recording - Start/Stop photo shooting * While smartphone is connected to the camera, camera button operation will be disabled. * Select all settings of the camera before connect to your smartphone.
1) Format the memory card, and copy firmware file to the root directory of Micro SD card 2) Insert the Micro SD to ISAW EXTREME and turn on power. 3) Firmware upgrade will be automatically started as showing the updating status on the LCD screen. 4) When upgrade is completed, the camera shows 'F/W Updating 7/7 stage 100%' and automatically turns off. *Do NOT turn off the device or take out the battery during firmware upgrade. 16.
- To minimize any kinds of damages from electromagnetic wave, we recommend to place the camera at least 8 inches away from human body. - The waterproof housing must be checked for leaks before each use. The seal must be clean and undamaged. Check the sealing before each use by a dive without the camera. - We accept no liability for any damage caused by leaks in the casing.
