User Manual Version 1.
Copyright Copyright 2016 All Rights Reserved Manual Version 1.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Safety Regulatory Information Caution: Only use approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Power Supply Use only the approved power supply 50-14000-148 output rated 5 Vdc and minimum 2 A. The power supply is certified to EN60950-1 with SELV outputs.
Hearing Aids The wireless device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void t he user's authority to operate the equipment. CE Marking and European Economic Area The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions: Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz France, outside usage is restricted to 2.4 - 2.454 GHz. Italy requires a user license for outside usage.
Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to the reseller for recycling.
Revision History Version Date 1.
Table of Contents 1 2 3 viii Item Checklist ............................................ 1 1-1 Standard Items ................................................................................... 1 1-2 Optional Items .................................................................................... 2 System View ............................................... 3 2-1 Features .............................................................................................. 3 2-2 Specification .........
1 Item Checklist 1-1 Standard Items a. Main unit b. Top cover of iSAPPOS 4 or iSAPPOS 5 c. Power cable d. Hand strap e.
1-2 Optional Items a.
2 System View 2-1 Features No.
4 No.
2-2 Specification Model Name iSAPPOS 4 / iSAPPOS 5 Scanner Jacket External I/O Ports USB port Lightening port 1 x USB 2.0 Micro USB (Charging ) 1 - charging to Phone (5V,1A) Power Power adapter Battery 5V/12W 3.7V, 1100mAh (Not charging to iPhone) Control / Indicator Physical button LED indicator Audio indicator 3 x scan button, 1 x battery status button, 1 x power switch 4 LEDs for battery status 1 x electromagnetic buzzer Peripherals Scanner RFID reader Attached cable 2D barcode scanner 13.
3 Getting Started 3-1 Assemble the iSAPPOS 4 / 5 Scanner Jacket 1. 2. 6 Slide the main unit into the top cover of iSAPPOS 4 or iSAPPOS 5 jacket. Fasten the screws(x3) to secure the main unit as the picture shown.
3-2 3-3 Install iPhone into the iSAPPOS 4 / 5 Scanner Jacket 1. Thoroughly clean your iPhone 6/6S or iPhone 6/6S Plus with cloth. Avoid scratching the screen during normal use. 2. Align and insert the iPhone 6/6S or iPhone 6/6S Plus into iSAPPOS 4 / iSAPPOS 5 jacket and press firmly all around the jacket to ensure iPhone 6/6S or iPhone 6/6S Plus is completely fixed. Power On/ Power Off 1. Push the power button to turn on the system and hold 3 seconds to turn off the system.
3-4 Charging the Device 1. 2. 3-5 Install the Audio Cable 1. 8 Charging the device using the computer. Plug the end of the USB connector into your computer’s USB port. Make sure the computer is turned on and not in Sleep mode. Charging the device using the power outlet. Plug the USB end of the power adapter cable into the AC power adapter and then Connect the AC ad adapter to an electrical outlet. Insert the 3.5 mm audio cable plug into the connector on the system until fully seated.