Instruction Manual PORTABLE STORAGE DEVICE & MULTI - CODEC JUKE BOX Model iHP-100 Model iMP-350 Model iHP-100 Thank you for your purchase. Please read this manual carefully before using your new player. http://www.iRiver.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICES MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Portable Storage Device IHP-100 can be used as the storage device with 10GB capacity. URL : http://www.iRiver.com USB 2.0 is supported IHP-100 is the storage supporting USB 2.0 Interface which maximum transfering speed is 480 MBit/Sec. Provides information on our company, products, and email addresses for support. Multi-Codec Player Supports MP3, WMA and ASF WAV format as multi-Codec player. WAV file only support 44.1KHz / 16 Bit.
1. Locating the Controls Front View, Side View....................................................... 5 Up/ Down Side, LCD Window........................................... 6 Remote Control................................................................. 7 4 FRONT VIEW LCD Window 2. Getting started Using AC POWER ADAPTER.......................................... Software Installation.......................................................... Connecting the iHP-100 to the Host PC..........................
Remote Control UP/ DOWN SIDE (STOP) / Power OFF LINE INPUT (Optical / Analogue) Power ON / / FM HDD (PLAY / PAUSE) LINE OUTPUT REMOTE CONTROL/ (Optical / Analogue) EARPHONES Jog Handle for Multi Function Control DC IN 5 V USB Connection Port BITRATE LCD Window THE ORDER OF SONGS PLAYBACK MODE HOLD REC NAVI/MENU SOURCE /TYPE BATTERY INDICATOR FOLDER NAME ARTIST NAME TITLE NAME Level Meter Playback Information PLAY TIME HOLD FILE FORMAT BIT RATE EQ A-B/MODE VOLUME - VOLUME + SAMPLE RATE 6
Using AC POWER ADAPTER Use only the AC Power Adapter supplied with the player. Connect the adapter to the 5V DC jack on the player and into an AC outlet. To install “Program” Windows 2000 and Windows XP have the program to support USB 2.0 Storage Device, and you can use this player without any program installation. But install iHP manager to use DB function. And install this program to use this player as portable storage at Windows 98SE, ME O/S. Insert the Installation CD into the CD-ROM drive.
Click “Finish”. The installation is completed. To install the iHP-100 Device Driver This processing must be done after installing the iHP-100 Manager Program. If the player is recognized on the host PC, Add New Hardware Wizard is activated. Click “Next”. Click “Next” after selecting “Driver Search” option. Click “Next” after selecting the folder saved the “iRiHP. inf” Click “OK” after selecting the folder installed the “iRiHP. inf” file (C:\ProgramFiles\iRiver\iHP100\ drivers) Click “Next” Click “Next
To use as a portable storage To disconnect the player from the Host PC If the player is not connected to the host PC, connect it to the host PC. (Refer to page 10) Check the icon of the player on the PC window and confirm whether the player is added as a new driver on the explorer. Click anyone of 2 icons. To copy from the PC to the player Drag and Drop to copy folders or files of the PC to the driver of the player.
Connect the earphones and remte control as shown below. Put the HOLD switch to “OFF”. To play / Pause Press the PLAY/STOP button to turn on the player. Press it again to play. To select music : To select previous music : To select next music To fast forward To stop To fast reverse To play next track To turn off the player To play previous track To adjust the volume To increase volume To decrease volume NOTE - When "Hold" is ON, the buttons on the player will not function.
Basic Operation To adjust the volume Press + on volume button to increase volume and press – on button to decrease volume. File playback FM receiving To Record Selecting FM Mode when listening FM : (Refer to page 26) [Record standby] [To start recording] [To select source to record] To activate Navigation 1. To increase volume. 2. To select the previous music for Audio files or station for FM. 3. To increase volume. 4.
The remote control operates every function using 5 buttons. Basic Operation Function Volume Control: Slide jog lever to the right to increase volume or to the left to decrease volume. Changing Mode : STOP (Refer to page 28) HDD FM Changing : PLAY / PAUSE NAVIGATION Main unit and Remote control both locked. Only Main unit is locked. Only Remote control is locked. Press the Navi/Menu jog lever with a short click and find the desired track by or . To play the track, press Navi/Menu with a short click.
Interval Repeat Play selected interval repeatedly while playing. Press A-B button once to select the beginning Point. It is useful when fast-searching your favorite file of files listed on the player by using ID3 Tag information and file name. In case DB file (irivnavi.idb) was damaged or deleted, it is operated as a music searching function by using File Tree information. 1. Navigation using File Tree Press the NAVI/MENU handle to display the list of musics.
2. Navigation using Music Information It is useful when fast-searching your favorite file of files listed on the player by using ID3 Tag information and file name. Press the NAVI/MENU handle toward condition. or to select searching In case DB file (irivnavi.idb) was damaged or deleted, it is operated as a music searching function by using File Tree information. Press the NAVI/MENU button. The function selection graphic displays on the LCD. Push the NAVI/MENU handle toward function.
24 To update DB To add DB When DB file (irivnavi.idb) was damaged or deleted by your mistake, you can not use NAVIGATION by using ID3 Tag information. You can create or restore DB file by using the host PC. When DB file (irivnavi.idb) was damaged or deleted by your mistake, you can not use NAVIGATION by using ID3 Tag information. You can create or restore DB file by using the host PC. Connect the player to the host PC.
