Hardware Instruction Manual Digital Audio Player/recorder/Camera/FM Tuner Model iFP-1000 Series iFP-1000 Series Thank you for your purchase. Please read this manual carefully before using your new player. http://www.iRiver.com http://www.iRiver.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Contents Getting started 1 Locating the controls 2 PC software installation 3 Basic operation 4 Convenient Functions 5 Additional information 6 This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.
Getting started Contents 1-1 Features 1-2 About power supply 1-3 Getting started Getting started Internet This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.
Internet Features URL : www.iRiver.com " Find information on our company, products, and customer and technical support. " Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features. " Consult the product FAQ. " Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible.
About power supply About power supply Battery detach/attach Charging by using USB cable Note " " " To detach : Press the tab to release the battery and slide it out of the player. " To attach : Slide the battery onto the player until it locks into place. The player will charge even if it is turned off. A charging indicator light will illuminate while the player is charging. The light will turn off when charging is complete.
Locating the controls Contents 2-1 Rear View 2-2 LCD screen 2-3 Locating the controls Getting started Front View This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual.
Locating the controls Locating the controls Front view Rear view Neck strap Charging indicator Volume -, Reduce, Down Camera I Hold Battery Lock Rechargeble Battery Camera lense (Previous / Fast Reverse) LCD Screen Locating the controls Locating the controls Microphone Earphone Volume +, Enlarge, Up NAVI/MENU I (Next / Fast forward) USB connection port Bottom view Camera sound speaker Rechargeble Battery Note 2-1 " Power on/off, / (Play/Stop), Stereo Mode/REC/Shot MEMORY/EQ A-B (Interva
Locating the controls PC software installation LCD Screen Contents File format Clock Hold Battery indicator Bit rate sampling rate Status Current bar File number Playing time Playback node Folder icon Folder name Note PC software installation 3-1 Attach the player 3-4 PC software installaion Locating the controls Equalizer Visualization Program/file icon 2-3 Volume Artist/title name According to file type displayed as follows : REC : REC ASF : ASF MP3 : MP3 WMA : WMA IRM : IRM OGG : OG
PC software installation MPORTANT, please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC. Software installation " PC software installation Software installation Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD. " " If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin.
PC software installation Attach the player Software installation “Next” after confirming the 5 Click installation folder. Connecting to the PC 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. USB port on the PC Type “A” Type “A” Type “B” is in progressing. 7 Installation Click “Finish” after the installation is completed. Type “B” “USB CONNECTED” will appear on the on the player by pressing the button 2 Turn marked STEREO.
Attach the player Attach the player Installation of New Hardware Installation of New Hardware computer will automatically search to installing iRiver Music Manager from 1 After 2 The find your new hardware. the CD and connecting the player to your 5 The installation will continue. “Finish” 6 Click Completed the installation of “New hardware”. PC, "Found New Hardware" screen is displayed. (Windows XP) The iRiver software driver will not cause any damage to your computer.
Attach the player Basic operation Safely Removing the player from the PC the “Safely Remove hardware” 1 Select after clicking the “Safe To Remove the “Stop” after selecting the device 2 Click to remove. Hardware” by using the right button of mouse. 4 Click the “Close” after confirming the Safely Remove Hardware message.
Basic operation Basic operation Turning on the player " Connect the earphones as shown below. Changing functions " Put the HOLD switch to “OFF”. OFF Press and hold MODE button to appears current function on the LCD screen. Push the NAVI/MENU button toward to select the desired function, then click the NAVI/MENU button to enter that mode. h Pus h Pus " " Press the PLAY/STOP button to turn on the player. The “My Image” appears on the LCD. Press it again to play.
Basic operation Basic operation Navigation Listening to music 1 2 3 4 Press NAVI/MENU button and find the desired music file by pushing NAVI/MENU button to VOL + or VOL – direction. To play the files, press the NAVI/MENU button, push NAVI/MENU/VOL to the I direction or the PLAY/STOP button. 5 6 7 8 Play h Pus Click Upper folder To move to the upper folder, NAVI/MENU/VOL to the I If there is no upper folder, NAVIGATION stops. Click Click Delete Delete direction.
Basic operation Basic operation Tuning FM stations Push NAVI/MENU/VOL to the Shooting or To flip a picture direction to select desired station. h Pus Click Click Camera zoom in/zoom out Zoom in Press the STEREO/PLAY/STOP button to select Stereo/Mono.
Basic operation Basic operation Viewing a picture (My Album) Customizing the function settings(Menu) You can customize this setting menu according to your preference. Press and hold NAVI/MENU button will enter the menu system. h Pus Previous Next h Pus Full screen Click lick Long C Click Zooming a picture Click h Pus Scroll between menus : Push NAVI/MENU button to the or diretion. 2. Select sub menus : Push NAVI/MENU button to the VOL+ or VOL- diretion.
Listening to music Listening to the FM radio Playing music file FM radio listening Power off 1 Press and hold MODE button. The current function appears on the LCD screen. lick Long C playback mode Function Power on/play/stop A-B repeat Click Click Adjusting the volume lick Long C lick Long C NAVI/MENU/VOL to the or direction to select FM radio. 2 Push Press NAVI/MENU/VOL button to confirm.
Listening to the FM radio Listening to the FM radio Programming station preset manually Programming station preset automatically Automatically select stations and save them in sequential order.(It only activates while the player is not in PRESET mode) Press and hold MEMORY(A-B) button. Press NAVI/MENU/VOL button to cancel Automatically select stations and save preset mode. them in sequential order. 1 2 and hold MEMORY(A-B) button.
Listening to the FM radio Listening to the FM radio Deleting preset station 1 Tuning stations automatically Select the station to be deleted at preset mode. 2 Press and hold the MEMORY/EQ(A-B) button. PRESET CH 03 PRESET CH 04 Press NAVI/MENU/VOL button to cancel preset mode. Push and hold the NAVI/MENU/VOL to or direction. The frequencies are scanned automatically. When a broadcast is receied, canning stops.
Recording the FM stations Recording the FM stations To stop FM recording Recording the FM stations Press the MODE/REC button during FM reception. The station will be recorded, the remaining recording time will be displayed on the LCD screen. Press the MODE/REC button to stop recording. " The recorded file is saved as TUNER000.REC. " It is saved in the RECORD folder. " Recorded REC files can be converted to MP3 files using iRiver Manager.
Recording voice Recording voice Recording voice To pause recording voice 1 Press and hold the MODE/REC button to appears current function on the LCD screen. Press the PLAY/STOP button to pause the recording process. Press the PLAY/STOP button again to restart recording. " lick Long C the NAVI/MENU button to the or direction to select Voice mode. 2 Press Press the NAVI/MENU button (or PLAY/STOP) to go to Voice recording mode. (The recorder will be in standby mode.
Digital camera Digital camera Shooting Shooting 1 Press and hold MODE button. The current function appears on the LCD screen. 4 Push NAVI/MENU/VOL to the VOL+ direction to zoom in or zoom out. Zoom in h Pus lick Long C Zoom out NAVI/MENU/VOL to the direction to select camera. 2 Push Press NAVI/MENU/VOL button to confirm. MEMORY/EQ(A-B) button to take a picture. 5 Press Press A-B button to flip a picture to flip a picture.