2nd IRIVER STORY COVER STORY USER GUIDE
T able of Co nt e nt 01 03 Getting Started Other Information Components 03 Locating the Controls 03 Power Management Charging the Battery Connecting the Product Using iriver plus 4 Using Adobe Digital Editions Important Safety Information 33 05 Troubleshooting 35 06 Copyrights 37 07 Certification 48 11 Registered Trademark 48 14 Exemption 48 02 Using iriver story Home Screen 16 Selecting Files 17 Viewing Files 20 Memo/Snapshot 22 Wi-Fi Service 25 Music 28 Recording
- FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EB05 Spec.
Components Components may be changed without prior notice for improvement of product performance or quality. Player + Stylus Pen Quick Start Guide & Product warranty USB Cable Quick Start Guide: This is the manual explaining how to use our device. Product Warranty: Please keep this in a safe place because you may need it at the time of warranty repairs. USB Cable: You can connect this to the computer and use it to recharge the power.
Volume Speaker Power SD Card Slot Earphones Jack USB Port MIC Recharge LED Power: You can turn the power off by pressing and holding it for a while. You can switch to the standby mode by pressing it briefly. Home: Indicates the initial screen. Menu: Shows the menu list during mode operation. Previous: Stands for previous screen. Previous/Next Page: Shows the previous/next page on file list or file viewing. Stylus Pen: This is the pen-shaped writing apparatus used when you touch the screen.
Power Management Turning on/off 1. Press and hold the [ ] and the power comes on. 2. If you press and hold the [ ] when the product is turned on, then the power will be turned off. This model supports an automatic power-saving feature to minimize battery consumption. Depending on the power-saving mode settings, the product will be automatically turned off if keys are not operated for a given time. (refer to page 32) Switching to Standby Mode 1.
Charging the Battery Charging the Battery Using Your Computer 1. Open the cover on the bottom of the product. 2. Turn on your computer and connect the product to your computer. The internal battery will charge automatically. Replay Time - Continuous Book Replay Time: Max. 11,000 page view - Continuous Music Replay Time: Max. 30 hours (based on MP3 128 Kbps, 44.1 KHz, Volume 10, EQ Normal). Once recharging is completed, the Recharge LED will turn off. Do not use cables other than the USB cable provided.
Charging the Battery Using the USB Adapter 1. Open the cover on the bottom of the product. 2. If you connect the USB adapter to the device and power plug, the internal battery will charge automatically. USB adapter can be purchased separately. Connecting the Product Connecting with the Computer 1. Open the cover on the bottom of the product. 2. Turn on the power of the device and computer. 3. If you connect the device to your computer, you will see the screen where you can select connection mode.
Do not use cables other than the USB cable provided. It may cause malfunction. For successful connection between your computer and the USB cable, make sure that all the functions are disabled before connection. Check if the product is connected to a high-power USB 2.0 port. If connected to a keyboard or a USB hub without a power supply of its own, connection with the computer may not be troublefree. Disconnecting from your computer 1.
Please connect the USB cable in the proper manner. If the power of the computer or product is turned off or the USB cable is disconnected while copying or moving files/folders, it may cause serious damage to the memory. Transfer rate may differ depending on the computer or OS environment available for your region. Deleting Files (Folders) from the Product 1. Select the files/folders to be deleted, right-click on them and select [Delete]. 2.
Inserting/removing the SD card 1. Open the cover on the bottom of the product. 2. Turn the power off, place the SD card (see the figure below) in the SD card slot, and press it in gently. 3. Press it in once more and the card can be removed. Recommended SD cards Brand: SanDisk, Transcend Insert/remove the SD card while the power is off. Do not force the SD card. It may cause malfunction and damage to the SD card. Do not detach the SD card when in use.
It is recommended that you format a SD card to FAT 32 system. If a SD card is not recognized or malfunctions, try to use it again after formatting. SD cards can be purchased separately. It is recommended that you use a SD card up to 32GB. Using iriver plus 4 iriver plus 4 is an integrated software which manage a variety of multimedia files. Using iriver plus 4, you can transfer files on the computer to the product and do automatic firmware upgrade. Installation 1.
Windows® 7 Specifications (For Windows® 7, note that only 32-bit version will be supported.) - 1GHz or above, 32-bit processor - Memory: 1GB or above - Free space more than 16GB - DirectX 9 Graphic Device with WDDM 1.0 higher Drive - SVGA or high-resolution monitor (min. 1024x768 resolution) Adding Media to the Library 1. When iriver plus 4 is first run, the Add Media Wizard will be executed. 2.
2. Select the file checkboxes you want to transfer from your computer to the product and then click [Transfer] button or drag & drop the file to Device icon at the bottom or Device window. You will see the file transfer status in the [File Transfer] tab. 3. When the file transfer is complete, you will see the selected music files added to the device library. Initializing the Disc 1. Connect the device to your computer’s USB port and then execute iriver plus 4. 2. Select [Device > Initialize Disc].
If there is not enough battery, a firmware upgrade may not be initiated. Never disconnect the device from your computer while a firmware upgrade file is being downloaded. After the download is finished, the upgrade will be initiated when the device is disconnected from your computer. If the device firmware is the latest version, a pop-up window will be displayed to indicate that it is the latest version.
2. Once you type in your ID and password on the computer's authentication window, press the authentication button. You can obtain the Adobe ID from the Adobe website. 3. After authentication is completed, the device installation helper window will appear if you connect the device to your computer. 4. Press the device authentication button. Transferring Files to the Device 1. Execute the Adobe Digital Editions program. 2. Please select content to be saved on to the device and drag & drop the file.
Home Screen For several models sold in markets other than Korea, some functions may not be supported. Home Screen Legend : Indicates Wi-Fi connection status. : Shows battery status. Book: You can view books and documents saved on the device (pp.17-22). Comic: You can view comic books saved on the device (pp. 17-22). Bookmark: You can view bookmarked files from books and comic books (pp. 17-22). My Folder: You can explore files saved on the device and SD card.
Selecting Options 1. Once you turn on the power, you will see the home screen. - If you press the [ ] in the middle of using the device, you will also see the home screen. 2. If you touch the function button on the screen, you can enjoy the function. 3. If you press the [ ] during function operation, the previous screen will appear. Please use the stylus pen when using the touch screen. When touching the screen, please do so gently; if you touch it hard with a sharp object, the screen may be damaged.
Compressed File Formats Supported: JPG, BMP, PNG, GIF, and Zip compressed file formats for all the above formats. It may take longer for progressive JPEG files to open or to turn pages. File List Screen Legend Progress Bar on File Name: Indicates how much of the file is read. Format: Specifies the file’s format. : Designates the files registered as favorites.
Deleting Files 1. On the file list, if you push the [ ] button on the top right of the screen, you can activate [ ] icon next to the file name. 2. If you press the [ ] icon next to the file, you can delete the file. Deleting All Bookmarks 1. On the file list, if you press the [ you can delete all bookmarks. ALL ] on the top right of the screen, Deleting Bookmarks 1. On the file list, if you press the [ ] on the top right of the screen, you can activate [ ] icon next to the bookmark. 2.
Viewing Files File Viewing - If you slide the [ / ] or press the left/right on the screen while viewing, you will see the previous/next page. - If you slide the [ / ] while viewing, you will see the page status bar. Having moved to a page you want after pressing the [ / ], you can view the page if you press the [ ]. (If you want to cancel continuous moving, press the [ ].) - If you press and hold a search word while viewing, you will see a window with dictionary lookup results.
Auto : Resizes the screen size according to the size of the file (Comic). : Sets up the auto page turner function (Comic). : Creates drawings on the page you are viewing (Book/Comic). : Deletes drawings on the page you are viewing (Book/Comic). : (Book/Comic) If you choose: Sets up the thickness of the pen. If you choose: Sets up the thickness of the eraser or deletes all drawings you have entered. Book Viewing Menu 1. While reading books, press [ ] to view the list of menu. 2.
Depending on file format, you may not be able to see the menu. Once you view a file, you will see the same status of the file (e.g., zoom in, landscape viewing) on your next viewing. Comic Viewing Menu 1. While reading comic books, press [ ] to view the list of menu. 2. You can select a menu and set up items. - Page Moving: Enables you to move to the page you entered. - Change Viewing Order: Changes the viewing order of the comic book you are reading (left to right and right to left).
Deleting Memo/Snapshot File 1. If you press the [ ] on the top right of the screen on Memo/ Snapshot list, you can activate the [ ] icon next to Memo/Snapshot. 2. If you press the [ ] icon next to the Memo/Snapshot file to delete, you can delete the Memo/Snapshot. Creating Drawings 1. On the Memo/Snapshot list, press the tab on the left side and select Drawing. 2. If you press [ ] on the top right of the screen, you will see a memo window. : Creates a drawing. : Switches to the eraser mode.
Creating Text Memos 1. On Memo/Snapshot list, press the tab on the left of the screen and select a Text memo. 2. If you press the [ T ] button on the top right of the screen, you can see a memo window. 3. Once you enter a memo using the virtual keyboard and press the [ ] on the screen, you can save the memo you typed. Viewing Text Memos If you select a memo on the list, you can see the memo that you chose and toolbar. : Sends an email with the memo as an attachment. T : Revises the text memo.
Wi-Fi Service The Wi-Fi service function may not be available for some models. This function allows you to connect to the wireless Internet and buy books online and send and receive emails. For several models sold in markets other than Korea, some functions may not be supported. How to Buy Books Online 1. On the Home screen, select [Wi-Fi Service-Book2] and you will see the Book2 site. - Please enter your ID and password on the Adobe activation window. 2. Log in by typing in your ID and password.
- If you press the [Search Again] button below the [Search Wireless LAN] tab, you will see the AP list searched again. 4. Once you select the AP to connect and press [Connect], you will see the wireless network connecting. - Depending on AP, you may have to enter the key index and network key. If you select a menu requiring wireless network connecting, you will see the AP list window appearing. Adding Email Accounts 1.
Deleting Email Accounts 1. Once you press the [ ] on the top right of the email management window, you can delete [ ] next to the account. 2. If you press the [ can delete it. ] icon next to the account to be removed, you Viewing Email Account 1. If you select an email account you want on the email account list, you will see the email list. 2. You can activate functions by pressing icons on the top right of the screen. : Allows you to compose new mail messages and send them.
- If you press the [Reply] on the bottom of the inbox screen, you can reply to the message you received. - If you press the [Forward] on the bottom of the inbox screen, you can forward the message you received. While viewing mail messages, if you press the [ / ] or the [ / ] on the bottom right of the screen, you can move to the previous/next page. Music Selecting Music 1. If you select [Media – Music] on the Home screen, you will see the music list. 2.
- While playing, press the [ / ] to play the previous/next music. - While playing, touch the location of the progress bar while replaying, you can move to a location you want. - If you press the [EQ] on the screen, you can change the EQ. - If you press the [Replay Mode] on the screen, you can change the replay mode. Music Listening Menu 1. If you press the [ see the menu list. ] on music list or while replaying, you can 2. You can select menu and set up items.
The recorded file will be saved in the following format. VOICEYYMMDDXXX.mp3 (YY:Year, MM:Month, DD:Day, XXX: saved number) The size for recorded files per minute according to recording quality is as below. low: Approx. 240KB / medium: Approx. 380KB / high: Approx. 720KB Recording can be done for up to 5 hours. Listening to recorded files 1. From the recording standby window, press the [Replay] key on the left of the screen to view the list of recorded files. 2.
Moving to Previous/Next Page 1. If you press the [ / ] on the lookup results screen, you can move to the previous/next page. Moving to Previous/Next Entry 1. If you press the [ / ] on the lookup results screen, you can move to the previous/next entry page. Setup You may set up your own user environment. The pre-installed menu structure may differ depending on the firmware version. Settings 1. Please select [Setup] on the Home screen. 2.
+ Data Update: Sets up the time interval during which the mailing system fetches email messages. + BCC to Yourself: Sets up the mail program so that it could always send a BCC (blind carbon copy) to yourself. + Signature: Sets up the signature of yours at the end of the mail message. Auto Memo Setup: Sets up a function whereby a memo pad appears whenever you pull out the stylus pen on the initial screen.
Important safety information Relating to the Product - If the same screen is turned on for a long time, there may be an after -image on the screen. - Do not allow metal (coins, hairpins, etc.) or foreign substances that burn easily to get inside the product. It may cause failure. - Do not place heavy objects on top of the product. It may cause damage or failure.
- Do not drop the product, or subject it to strong impact or vibration. It may cause damage or failure. - Do not press multiple keys at the same time. It may cause damage or failure. - Do not disconnect from your computer when transmitting data. It may cause failure. - When connecting the product with a computer, use a USB port on the back of the computer. Some generic computers with sub-standard USB ports can cause damage to the product.
- When using while on the move, check if there are any dangerous obstacles. There is danger of injury. - There is a risk of electric shock during electrical storms, so do not use if possible. There is danger of injury. - If you experience tinnitus, reduce the volume or stop use. There is danger of injury. - Do not use for long periods at high volume. There is danger of injury. - Do not use headphones/earphones at high volume. There is danger of injury.
+ There is an error on the computer when connecting the USB. - Check if the product is properly connected to the computer. + The capacity changes after formatting. - There can be slight changes in capacity according to the OS of the computer you are using. + The screen is not normal. - Check if there are foreign substances on the screen. + The device is not connected to my computer. - Please connect the device to the USB port located on the backside of the computer.
Copyrights iriver Ltd. owns the patent rights, trademark, copyright, and other intellectual property relating to this manual. Thus, none of the contents of this manual can be copied or reproduced in any form or by any method without the consent of iriver Ltd. Using any part or all of the document may result in legal sanctions. Software, sound sources, videos, and other content with copyrights are protected under the related provisions of copyright regulations, etc.
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
Certification KCC / FCC / CE / CCC Grade B device (home broadcasting and communication device) is mainly for domestic use (grade B). It is EMC certified, and can be used in all areas. Registered Trademark Windows 2000, Windows XP, Windows Vista, and Windows Media iriver E-book contains Adobe® Reader® Mobile software under license from Adobe Systems Incorporated, Copyright © 1995-2010 Adobe Systems Incorporated. All rights reserved. Adobe and Reader are trademarks of Adobe Systems Incorporated.
iriver Ltd., the manufacturer of this product, continues to add new features and apply new technologies to it. All standards may be changed without prior notice to individual users. We cannot be held responsible for data loss caused by the use of the product. The technical limits in the manufacturing process may cause EPD Panel to have approx. 0.0012% bright or dark pixels. However, it does not affect the capability of the product.