DPF11 INSTRUCTION BOOK User Guide Product Name : Network Audio Player Model Name : DPF11
CON TENT S 01 02 03 Before Use Using the Device 0 2 Saftey precautions 2 8 Basic operation 4 2 Managing Files 5 9 Trouble shooting 0 7 Remark 3 0 Notification bar 4 5 MQS streaming 6 0 Copyright 1 1 Product specification 3 2 Music list screen 4 7 Purchasing music in the store 6 0 Certiications 1 2 Package contents 3 4 Music playback screen 4 8 Using USB DAC function 6 3 Gracenote 1 3 Name of each part 3 5 Listening to music 5 1 Using bluetooth 6 3 Trademarks 1 6 Managing power 3 6
SAFTEY PRECAUTIONS Please check [Safety Instructions] before using the device for a safety use. Descriptions : Instructions are divided into “Warning” and “Caution”, and the meanings are explained in the following. Warning indicates a serious danger. Caution indicates a hazard. Explanations of Symbols Indicates “Forbidden” or “Prohibited matters”. Indicates “Required Action” or “Perform as instructed”. Use Warning Users should not decompose, repair or change the product randomly.
Pay attention not to apply force or press on the part of the cable is connected, if the cable is connected to the connection port. - You can break the sound terminal products. Do not disconnect the USB cable during data transfer. Use a USB port at the rear of the PC USB cable connection. - Connection to the USB port with assembly defect or malfunction may develop product failure. Do not use products such as chemicals or cleaning agents, because they spoil the surface and strip lacquer.
POWER CODE AND PLUG Warning Do not plug or unplug with wet hands. Plug the power plug into a 110~220V(50~60Hz) AC outlet. If there is dust on the power plug pins or mounting surface, please remove the power plug, and then remove the dust. When handling the power cord, please observe the following: Do not compromise. / Do not transform.(ex: extension) / Do not apply heat. / Do not place heavy objects. Do not insert it in a small space. / Do not bend forcibly. / Do not twist.
INSTALLATION Warning To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. Do not let the product contact with water, and do not place objects with liquids, such as vases, on the product. Do not place or use the product on following. You can cause a fire or electric shock. A place where you can splash water or a dump place such as a bathroom. / A place where rain or fog can flow directly./ Outside of the rainy season.
- If static electricity is generated when connecting a USB device, a playback can run abnormally. In this case, disconnect the USB device and then re-connect. - A copyrighted track (WMA-DRM* tracks) cannot be played on this product. * DRM (Digital Rights Management): several technical methods that are used to control or limit the use of digital media contents. - Coded or encrypted tracks in a special way cannot be played on this product. - Do not disconnect the device when playing a file on the USB device.
Remark Cleaning the Device To ensure the best performance from this device, you must keep discs and equipment clean. - Disconnect the power cord before cleaning. - Wipe the stain with a soft cloth. If there are a lot of stains on the device, wipe clean with a dry cloth, after wiping with a damp cloth in water. - The performance of the device can be degraded, damaged, or the paint may peel off, therefore please note the following: Do not wipe with a hard cloth. / Do not wipe too hard.
Product specification Display DAC Storage Digital _Out _Input Analog _Fixed & Variable Out Fixed output level Variable output level Channel Separation Frequency Response THD(Total Harmonic Distortion) SNR(Signal to Noise Ratio) Audio File Supported Audio Sample Rate USB Supported USB DAC Supported Network Supported CD Ripping audio format Battery Dimension / Weight 7”WVGA(1280x800) Touch Display Cirrus Logic CS4398 x2 (Dual DAC) SSD 1TB (Max 4TB, RAID 0,5) AES/EBUx1, BNCx1, Coaxialx1, Opticalx1 AES/EBUx1,
Package contents Components may be changed without notice to improve product performance and quality. DPF11 Adapter Protective Case USB cable for data transfer Antenna Power code T wrench Quick Start Guide & Warranty Card Adapter Protective Film Power Code & Adapter: Connect with the product to recharge the product. Adapter Protective Case: Protects the adapter from external shocks. You can bind the adapter protective case to the supplied adapter.
Name of each part Appearance of the product and the printing, stamping contents may vary depending on a model. 2 1 Balanced audio pin map 3 R- R+ L+ L- 4 5 10 6 78 9 11 12 1 Touch LCD Displays the screen, and you can touch the screen to operate. 2 CD Insertion Push the CD to insert. 3 Power LED Displays the Power On/Off status. Turn the wheel to adjust the size of the sound. 4 Volume Wheel You can turn On/Off the power of the product.
Digital Out 1 BNC Output Port Connect a BNC output cable to the port to output to digital. 2 Optical Output Port Connect an optical cable to the port to output to digital. 3 Coaxial Output Port Connect a coaxial cable to the port to output to digital. 4 AES/EBU Output Port Connect an AES/EBU cable to 12 3 4 5 6 7 8 the port to output to digital. Digital In 5 AES/EBU Input Port Connect an AES/EBU cable to receive a digital input.
Fixed 1 Fixed RCA Port 2 Fixed Balanced Connect Balanced cable to the port to Port output to analog. Variable Connect Balanced cable to the port to Balanced Port output to analog. Variable RCA Connect RCA cable to the port to Port output to analog. Ethernet Port Connect a wired LAN cable to the port. 6 USB Port Connect USB B type cable to the port 7 USB-HOST Port You can connect a USB storage Analog Out Variable output to digital.
Managing power Connecting the Power 1. Connect the adapter and the power cord. 2. Connect the adapter cable to the [Power] on the rear panel, and turn the mounting ring to tighten. 3. Connect the power cord and then press the [Power] button on the product for 2-3 seconds. 4. [ ] logo appears on the screen while the product is booted. Connect the power cord to a wall outlet after completing the connection of the product, an adapter, and the power cord.
Connections Earphones/Headphones - Connect earphones or headphones to the [BAL], [PHONES] port of the side of the product. - Connect earphones or headphones that support the balance cable to [BAL] port on the side of the product. - You can use various earphones/headphones that fit 2.5Φ, 3.5Φ, 6.5Φ. Do not raise the volume to loud when connecting earphones or headphones. You can lose your hearing if you plug the earphones or headphones on your ears and listen to the large volume.
Available Types of Cable Balanced (XLR) Cable Balanced calbes used in professional audio interfaces have better response capacity than regular cable, and can be transmitted from a long distance. GND HOT COLD UnBalanced(RCA) Cable It is the most commonly used basic cable to transmit the audio signal. Optical/Coaxial/BNC Cable Optical cable and coaxial cable(Coaxial/BNC Cable) are the cables that can be used to connect to the digital inputs and outputs.
Connecting DIGTAL OUT Connecting DIGITAL IN 1. You can connect the product to an external amplifier device by using AES/EBU, Optical, Coaxial, BNC cables to [AES/EBU OUT], [OPT OUT], [COAX OUT], [BNC OUT] port of the rear panel. 1. You can connect the product to an external source device by using AES/EBU, Optical, Coaxial, BNC cables to the [AES/EBU IN], [OPT IN], [COAX IN] port of the rear panel.
Connecting Fixed Analog Out Connecting Variable Analog out 1. You can connect ‘Blacned’ and ‘RCA cable’ to an external amplifier device from [FIXED ANALOG OUT] of the back the product. 1. You can connect ‘Balanced’ and ‘RCA cable’ to an external amplifier device from [VAIRABLE ALALOG OUT] of the back of the product. RCA Cable L/R Balanced Cable L/R Balanced Cable L/R RCA Cable L/R This product supports both ‘Fixed Analog Out’ and ‘Variable Analog Out’.
Inserting/Removing CD 1. Refer to the CD label and gently insert into the CD slot. 2. If you select [Remove CD] from the notification bar on the home screen, the CD will be realised. This product does not suport the CD Play function. When you insert the CD, the CD-Ripping fuction will be activated. Cautions for CD insertion - Do not put excessive force when inserting a CD. This can cause malfuction and CD breakage.
Inserting/Removing the MicroSD Card Recommended MicroSD card 1. Place the microSD card in the slot like the figure and press gently. 2. If you choose [Safely Remove SD Card] from the notification bar on the home screen, the microSD card will be removed safely. 3. If you press the microSD card one more time, the card will be separated. Brand: SanDisk, Transcent Cautions for inserting the MicroSD card Do not force the SD card. This may cause a malfuction of the product and damage to the microSD card.
Connecting USB Storage 1. Connect the USB storage device to the [USB] port on the side of the product. 1. Connect the USB storage device to the [USB-HOST] port on the back of the product by using a USB cable. Some products that require a separate driver installation or multiple drive generation(multi-card reader), etc. may not be supported. Some products that require a separate power source(external HDD, etc.) may not be supported. The USB host cable is optional.
Connecting to a Wireless Network Antenna Connecting to the Network 1. Connect the antenna for the wireless network to [ANT] port of the product. 1. Connect the internet connections(ADSL, VDSL, cable model and wired/wireless router, etc.) to the [ETHERNET] port on the back of the product, or connect to an AP that provides WI-Fi. 2. Check the notification bar and the setting menu if network is connected or not.
Connecting to a Computer Separating with the Computer 1. Connect the [USB] port and a computer by using the supplied USB cable for data transfer. 1. Check if there is a work in process between the product and the computer before disconnecting the USB cable for data transfer. Native DSD plays to PCM while connected to a PC as MTP. If it is connected to MTP via a USB cable while playing Native DSD, Native DSD will be terminated automatically.
Copying a File(Folder) to the Product Deleting a File(Folder) of the Product 1. If you select the files/folders to copy from a computer, drag and drop(Drop&Drop) to the drive added by the product, the selected files/folders will be copied. 1. Select files/folders to delete and click the right mouse key, then select [Delete]. 2. If you click [Yes] in the [File/Folder Delete Confirmation] window, the selected file/folder will be deleted. Please connect the USB cable for data transfer correctly.
Upgrading the firmware Upgrading the Firmware of the Product 1. Connect the product to a wired or wireless network. 2. When the new firmware is verified, the firmware update instruction appears. 3. Select [Update], and select the item you want to update. 4. Follow the prompts on the screen to proceed the firmware upgrade. Refer to page 56 for a network connection method. If you move to another screen while downloading upgrade files, the download will be stopped.
Basic operation Using the Touch LCD Basic Setting 1. The product is equipped with a touch screen LCD system that operates by a direct touch. If you touch the desired icon on the screen, the selected function will be operated. 1. Set the language to be used in the language setting screen that is displayed when you turn on the power for the first time after purchasing the product, and then click [Next]. 2. Set the time to use from the world time settings, and then click [Next].
Moving to the Previous Screen Setting Sound In/Out 1. Click [ ] while using the product to move to the previous page. 1. You can set in the notification bar screen or [Settings-Sound-Sound In/Out]. Moving Up/Down from the List 1. Drag the screen [down to the top]/[top to the down] from the display list to move the list. If ‘Sound In/Out’ is connected to ‘Digital In(Coax, OPT, AES/EBU, BNC), you can not output the sound with ‘Digital Out’.
Notification bar The Notification Bar will be displayed if you drag down on the home screen and click the notification bar display at the bottom. 1 The content is displayed if there is a notification notification. The notification will disappear 2 1 Display of message if you push the notification information aside. Screen Move the location of the Brightness Adjustment Brightness Bar to adjust the brightness of the screen. 3 Wireless Network Turns on/off the wireless network.
1 Automatic Battery Sets the automatic battery charging Charging Set function while playback. 7 8 2 Play mode Sets the playback mode. : Plays the music of the list being played in order : Plays the music of the list being played in random order 3 Repeat Mode 1 2 3 4 5 6 Sets the repeat mode. : Repeats playback of the list being played : Repeats the currently playing music : Turn off ‘Repeat Mode’ 4 Sound In/Out Indicates the setting screen.
Music list screen 2 3 4 5 6 7 8 9 10 11 12 13 14 5 Progression Displays the state of the progress. State Bar If you move the position of the bar, it moves to where you want. 1 6 Play Time Displays the total duration of the song. 7 Previous Short: Plays the previous song. Music/Rewind Long: Rewinds the music being played. 8 Play/Pause Pauses or replays the music 9 Next Music/ Short: Plays the next song. Fast Forward Long: Forwards fast to the playing music.
