AK10 INSTRUCTION BOOK INSTRUCTION MANUAL
CONTENTS Getting started _01 Components 02 Names of parts 03 Power supply management 04 Using _02 Connecting iPhone/iPod and listening to music 08 Using the USB DAC function 09 Listening to music 11 Other information _03 Safety 12 Problem Solving 14 Copyright 15 Certification 15 Registered trademark 16 Escape clause 16
User Guide Components Components may be changed without a previous notice to improve the performance or quality of the product Names of parts Power /lock Earphone terminal Status LED Volume AK10 AK10 USB cable Quick Start Guide & Warranty Card AK10 Lightning cable Quick Start Guide: This information describes the basic method of using the product. Warranty Card: The WARRANTY CARD is necessary when applying for warranty work (A/S) so keep it in a safe place.
User Guide AK10 USB terminal: Connect to computer iPhone/iPod. Charging LED: Displays product’s charging status. Power supply management Status LED LED color LED status Turned on Product staus Blue LED will remain on for 5 seconds after the product is turned on, and then go off. Maximum volume Red LED is activated when maximum volume has been reached. Minimum volume Blue LED is activated when minimum volume has been reached. + adjust the volume. Red LED blinks while adjusting volume with +.
User Guide Charging 1. Turn on the computer. 2. Using a AK10 USB cable to connect the product to the computer automatically recharges the built-in battery. Use only the AK10 USB cable provided with the product to ensure safe operation. Check that it is connected to a high-power USB 2.0 port. Connecting to a low-power USB port (some keyboards, USB hubs without their own power supply, etc.), may prevent normal charging. Once the computer goes into standby mode, the iriver device may not be charged.
User Guide Connect to iPhone /iPod and listen to music Connect AK10 to iPhone/iPod to enjoy high-quality sound. How to use it with iPhone/iPod 1. Turn on computer. 2. Connect earphone or speaker to product’s earphone terminal. 3. Use AK10 Lightning cable to connect product to iPhone/iPod. 4. AK10 delivers high-quality audio from iPhone/iPod. Listen to high-quality audio through AK10.
User Guide Macintosh OS X: Select [Output] tab in [Sound menu] below system default setting, and select [AK10 USB DAC]. The 64Bit operating system does not support USB DAC function through USB 3.0 port. Use the USB 2.0 port. Played sound may be distorted when using a frequently used USB or when PC operates slowly. Video and sound may not sync properly depending on original sound, output quality, and use environment.
User Guide Safety Related to the iriver device Failure to change the screen image may result in permanent discoloration. Do not put or drop metals or flammable foreign materials on the iriver device (coins, hairpins, matches, lighter fluid.). Do not put heavy objects on the iriver device. If the iriver device gets wet (beverages, medicines, sweat), DO NOT turn it on. Wipe dry with a soft cloth and take it to the nearest iriver service center.
User Guide Problem Solving Please check! 1. It cannot be turned on. Check the battery power level. Use the AK10 USB cable for charging and recheck. 2. It is not charged even when the iriver device is connected to the computer with the AK10 USB cable. Check that the AK10 USB cable is properly connected 3. An error occurs on the PC when the AK10 USB is connected. Check that the AK10 USB cable is properly connected. 4. There is no sound or there is static. Check that the volume is set to [0].
User Guide Registered trademarks Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8, and Windows Media Player are registered trademarks of Microsoft Corp. Escape clause The manufacturer, importer and agent will not be responsible for contingent damage including injury or other damage due to improper use and operation of this iriver device. The information contained in this instruction book is based on the current iriver device specifications.