Iridium Edge® Pro User Manual UM_Iridium_Edge_Pro_V 1.2 © 2020 Iridium Satellite LLC. Iridium®, Iridium Edge® and the Iridium Logo are registered trademarks of Iridium Satellite LLC and its affiliates. All other trademarks, service marks and logos are the property of their respective holders, which have not endorsed, sponsored or otherwise affiliated with Iridium. 1750 Tysons Boulevard, Suite 1400 McLean, VA 22102 USA Toll Free: +1 866.947.4348 (US Only) International: +1 480.752.5155 E‐Mail: info@iridium.
Legal Notices This User Manual provides user information and is provided “as is.” Iridium and its affiliated companies, directors, officers, employees, agents, trustees or consultants (“Iridium”) assume no responsibility for any typographical, technical, content or other inaccuracies in this User Manual. Iridium reserves the right to revise this User Manual or withdraw it at any time without prior notice. You can find the current version of this Iridium Edge® Pro User Manual on https://www.iridium.
INFORMATION. Intellectual Property, Trade Secret, Proprietary or Copyrighted Information To protect Iridium proprietary and confidential information and/or trade secrets, this User Manual may describe some aspects of Iridium technology in generalized terms. Iridium products may include copyrighted Iridium and third party software. Any such copyrighted software contained in Iridium products may not be modified, reverse engineered, distributed or reproduced in any manner to the extent provided by law.
https://www.iridium.com/resources/?fwp_resource_categories=legal-notice. Do not use the Iridium Edge Pro device until you have carefully read the Software Terms. Do not use the Iridium Edge Pro device if you do not wish to agree to the Software Terms. Your use of the Iridium Edge Pro Device constitutes your acceptance of all of the Software Terms.
Avis légaux Le présent manuel d’utilisation donne des renseignements pour les utilisateurs et est fourni « tel quel ». Iridium et ses sociétés affiliées, ses directeurs, ses agents, ses employés, ses fiduciaires ou ses experts-conseils (« Iridium »), n’assument aucune responsabilité pour toute erreur typographique, technique ou de contenu, ou toute autre inexactitude qui pourrait se trouver dans le présent manuel.
L’UTILISATION DE L’APPAREIL IRIDIUM EDGE PRO (Y COMPRIS LE MATÉRIEL, LE LOGICIEL ET/OU LES MICROLOGICIELS) ET LES ACCESSOIRES OU DES SERVICES SATELLITAIRES D’IRIDIUM, OU QUI DÉCOULENT DE LA CAPACITÉ OU NON D’UTILISER L’APPAREIL IRIDIUM EDGE PRO (Y COMPRIS LE MATÉRIEL, LE LOGICIEL ET/ OU LES MICROLOGICIELS) ET LES ACCESSOIRES OU LES SERVICES SATELLITAIRES D’IRIDIUM DANS LEUR TOTALITÉ, DANS LA MESURE OU CES DOMMAGES PEUVENT NE PAS ÊTRE RECONNUS PAR LA LOI ET AVEC AVERTISSEMENT OU NON DE LA POSSIBILITÉ DE TELS
Confidentialité et sécurité des données Iridium s'engage à protéger la confidentialité et la sécurité des données des utilisateurs des produits Iridium. L'Iridium Edge Pro n'est pas conçu ni prévu pour permettre le transfert de données personnelles de l’appareil à Iridium. Pour éviter tout doute, les utilisateurs des produits Iridium ne doivent pas communiquer ou fournir à Iridium des données personnelles sans le consentement exprès écrit d'Iridium.
achetez l'appareil. Si vous avez des questions concernant les réparations ou la garantie, veuillez contacter votre fournisseur de services, pas Iridium. Iridium Edge Pro User Manual UM_Iridium_Edge_Pro v 1.2 2020.08.
Table of Contents Legal Notices.......................................................................................................................... 2 Avis légaux ............................................................................................................................. 5 Important Safety Information .............................................................................................. 11 Importantes consignes de sécurité .......................................................
6.3 Select Cables .......................................................................................................... 21 6.4 Power Source .......................................................................................................... 21 6.5 Fuse Location ......................................................................................................... 21 6.6 Select a Mounting Location ................................................................................... 22 6.
Important Safety Information Prior to using Iridium Edge® Pro, read and understand the Iridium Edge Pro User Manual including the safety warnings and information. Failure to do so could result in serious injury or death. Installation WARNING Always secure power cables. Failure to secure cables could result in fraying or failure of the power cable, resulting in fire and or failure of the device. These hazards could cause serious injury or death. CAUTION Install the Iridium Edge Pro safely and securely.
Explosive Atmosphere / Blasting Areas WARNING Power down or turn off the Iridium Edge Pro when in a “blasting area” or in areas posted “Turn off two-way radio.” Obey all signs and instructions. Failure to do so could result in serious injury or death. WARNING Turn off the Iridium Edge Pro when in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your device in such areas could cause an explosion or fire resulting in serious injury or death.
Importantes consignes de sécurité Assurez-vous de bien lire et comprendre ce manuel d'utilisation, y compris les avertissements et les consignes de sécurité, avant d’utiliser l’Iridium Edge Pro. Le non-respect de ces consignes pourrait entraîner des blessures graves voire la mort. INSTALLATION AVERTISSEMENT Protégez toujours les câbles d’alimentation.
ATMOSPHÈRE EXPLOSIVE / ZONES DE DYNAMITAGE AVERTISSEMENT - Mettez l’ Iridium Edge Pro hors tension dans les « zones de dynamitage » ou dans celles indiquées comme suit: « Éteindre les radios bidirectionnelles ». Obéissez à tous les panneaux et consignes. Le nonrespect de ceux-ci pourrait entraîner des blessures graves, voire la mort. AVERTISSEMENT - Éteignez votre appareil lorsque vous vous trouvez dans une zone dont l’atmosphère est potentiellement explosive. Obéissez à tous les panneaux et consignes.
1 Introduction The Iridium Edge Pro supports a Java programmable platform that allows Iridium partners to program the Iridium Edge Pro to meet market specific requirements. It consists of a power supply, dedicated Iridium antenna, dedicated GPS antenna, BLE, four configurable inputs/outputs, RS232, RS485, and CAN bus in an environmentally sealed enclosure. It also contains an Iridium Short Burst Data® (SBD®) modem which allows remote devices to send and receive satellite messages from anywhere in the world.
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 2.3 Radio Frequency Exposure Safety The Iridium Edge Pro is not intended to be used in the vicinity of the human body.
3 Conformité aux normes L’Iridium Edge Pro est certifié comme modèle #9690. 3.1 Consignes générales en matière de sécurité d'installation Les certifications dans la plupart des régions, y compris aux États-Unis et au Canada, exigent que l'Iridium Edge Pro soit installé de telle sorte qu'il soit à au moins 20 cm (7,87 pouces) des personnes. 3.
3.5 Avis d’Industrie Canada Cette section contient les avis d’Industrie Canada (Innovation, Sciences et Développement économique Canada) 3.5.1 Antenne Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
4 Environmental Specifications 4.1 Temperature The temperature specifications for the Iridium Edge Pro are given in the table below. 4.2 Parameter Value Operating Temperature Range -40 ºC to + 70 ºC Operating Temperature Range ( with SBD using reduced duty cycle) -40 ºC to + 85 ºC Storage Temperature Range -40 ºC to + 85 ºC Testing Compliance The Iridium Edge Pro has been tested to the SAE J1455 specifications (March 2017) as per the following table.
5 Power and Mating Cables Iridium Edge Pro power and mating are provided by Iridium Service Providers or Value Added Resellers. These cables and the installation instructions will vary depending on the Service Provider and the general market requirements include sensors and equipment that are connecting to the Iridium Edge Pro. For all installation, the Iridium Edge Pro requires an input power of 7-32 VDC at its connector.
Figure 6-2: Spare IMEI Label 6.3 Select Cables Only use cables that meet the Iridium Edge Pro’s cable specifications and local regulatory codes. All cables used to install the Iridium Edge Pro should be fabricated by a qualified cable assembly shop. Use proper cables. Use of improper cables can result in damages to equipment, property or persons. Use power and ground conductors of proper gauge.
of the Iridium Edge Pro device. Iridium recommends consulting the vehicles owner’s manual to determine an appropriate circuit and to ensure that the fuse is adequate for the Iridium Edge Pro. 6.6 Select a Mounting Location The mounting location is critical to ensure a safe installation and reliable operation. Ensure that the mounting location has enough space to accommodate the Connector Cover.
Dielectric grease (e.g. Silicone lubricant) Optional: Waterproof sealing compound such as RTV silicone. In addition, the installer needs to provide all mounting hardware and screw fasteners. Screw fastener selection is installation specific and depends on the mounting surface material and thickness. 6.7.2 Drilling In cases where a mounting bracket is not used, the Iridium Edge Pro may be mounted directly on an asset. A drill template is provided in the appendix if drilling is required. 6.7.
Figure 6-3: Mounting the Iridium Edge Pro 6.7.4 Cable Routing When routing the Iridium Edge Pro’s mating cable be sure to Adequately secure and strain-relieve the cable. Do not bend the cable excessively around sharp corners and violate the bend radius specification. Route or protect the cable to avoid damages against persons walking or tripping. Connect the cable security to the power supply return ground, close to the power source.
Always secure power cables. Failure to secure cables could result in fraying or failure of the power cable, resulting in fire and/or failure of the device. These hazards could cause serious injury or death. 6.8 Blasting Areas The Iridium Edge Pro contains a transmitter and it must be considered as a two-way radio in blasting areas. If the Iridium Edge Pro is to be occasionally deployed in blasting areas, ensure that operators and users are properly trained.
Appendix A: Drill Template The following Appendix contains a drill template for the Iridium Edge Pro. Iridium Edge Pro User Manual UM_Iridium_Edge_Pro v 1.2 2020.08.