User's Manual Part 3

ManualsBrandsIridium Satellite ManualsElectronicsIridium Satellite Phone

14: GPS & Location Based Services

9575A User Manual 169168 9575A User Manual

Note: if you do not cancel Emergency Mode, your phone will continue to

remain in Emergency Mode even after you turn off and on the phone. If

you attempt to turn off power while in Emergency Mode, you will receive

a countdown warning timer that power down will commence and then

a notification that the phone is sending a power down notification to

emergency contacts. You will be provided the option prior to this screen

to immediately turn off the phone or you can wait for confirmation that

the power down notification was successfully sent and then the phone

will automatically power down.

Emergency Actions

In the Emergency Options menu, Emergency Actions will allow you

to determine the types of call and/or message actions that will occur

when Emergency Mode is initiated. The default setting is Message

and Call, which means that a message and call will be initiated to your

programmed contacts in the event that Emergency Mode is started

by pressing the red SOS button on the top of the phone or by selecting

Emergency Mode from the menu.

Additionally, the phone (if programmed) will send an SMS message to

your designated contact every five minutes in the following format:

EMERGENCY/Lat+38.950116(stdv 0075)/Lon-077.250050(stdv 0075)/Alt+964

ft(stdv 0075)/GPS sats 04/2012-06-15 15:37UTC/Batt 86%/Lang en/Iridium user

This message contains the following information:

• EMERGENCY notification

• The Latitude and standard deviation for accuracy

• The Longitude and standard deviation for accuracy

• The Altitude and standard deviation for accuracy

• The number of GPS satellites that were visible to the phone to assist with

gauging accuracy. If number of GPS satellites is generally greater than

4, the accuracy is generally good. If “NO GPS AVAIL” is displayed, the

location provided is an approximate location based on Iridium location

that is only an approximate location within an accuracy of ~90 miles.

• The date (year – month – day) and time (UTC)

• The % of phone battery charge remaining

• The language of the phone menu setting to give some indication of the

language of the user (ex. “en” is English)

• Iridium User

Yes

Are you sure you

want to exit

emergency mode?

Cancel Emergency

While in Emergency Mode the

dedicated SOS LED will illuminate

and SOS icon on the phone screen

will appear. The SOS LED will change

colors from red to green depending

upon the transmission status and

an audible tone will also occur (if

programmed) when the Emergency

Mode message is being sent.

Emergency Mode can be cancelled

by pressing the right soft key, labeled

Cancel.

If you decide to cancel Emergency

Mode, the phone will prompt you with

a message asking you if “Are you sure

you want to exit emergency mode?”

If you select “No” by pressing the right

soft key, labeled No, Emergency

Mode will not be cancelled. If you

select “Yes” by pressing the left soft

key labeled “Ye s ”, Emergency Mode

will be cancelled. If Emergency Mode

is canceled, a cancellation message will

be sent to your designated contact.

Cancel

15:40

09-JUL-13

Registered

SOS

Yes

Are you sure you

want to exit

emergency mode?

Cancel Emergency

After selecting Enter Emergency Mode

the countdown screen appears. You will

have 20 seconds to press the right soft

key labeled Cancel to stop Emergency

Mode if initiated accidentally. This

feature is designed to help reduce

false notifications to your designated

emergency contacts.

Once in Emergency Mode the phone

will initiate a call and/or message to

your designated contacts. The phone

call (if programmed) will occur in

speakerphone mode and will retry if the

attempted call is unsuccessful.

Cancel

Entering Emergency

Mode in 20 seconds.

Deploy antenna and

make sure it is

oriented towards the

sky.

Cancel

15:40

09-JUL-13

Registered

SOS

Summary of content (21 pages)

PAGE 1
Entering Emergency Mode in 20 seconds. Deploy antenna and make sure it is oriented towards the sky. SOS T Registered 15:40 Menu 09-JUL-13 Cancel Once in Emergency Mode the phone will initiate a call and/or message to your designated contacts. The phone call (if programmed) will occur in speakerphone mode and will retry if the attempted call is unsuccessful. SOS T Registered 15:40 Menu 09-JUL-13 Cancel Emergency Mode can be cancelled by pressing the right soft key, labeled Cancel.
PAGE 2
Emergency Actions Message and Call Message Only Call Only Select Back To change the default setting to either Message Only or Call Only, use the 2-way Navi-key, highlight the preferred option and press the left option key, labeled Select. Recipient (empty) (empty) (empty) Options Back To program a new Message Recipient, use the 2-way Navi-key and highlight the listing that you would like to Edit or Delete. Press the left option key, labeled Options.
PAGE 3
• To select an existing address, use the 2-way Navi-key to highlight the My Phonebook listing and press the left soft key, labeled Select. Phonebook Ada Adams Bob Smith Cat Steven Davy Jones Eddy Fisher Back Once the My Phonebook listing is selected, you will need to use the 2-way Navi-key to highlight which address to use and then press the left option key, labeled Select. Once your recipient has been added, it will appear in your Message Recipient listing.
PAGE 4
Regular Updates Update Frequency Update Recipient Select Back 14: GPS & Location Based Services Once your recipient has been added, it will appear in your Update Recipient listing. Quick GPS List Message Options Regular Updates Quick GPS List • To modify the Update Recipient, use the 2-way Navi-key to highlight Update Recipient and press the left soft key, labeled Select. Select Back After selecting Update Recipient, you will see one empty listing for programming.
PAGE 5
Position Format From the Format screen, to modify the setting for position format, press the left soft key, labeled Select. Format Position Altitude Select Back Back Current Location Position Decimal Degree Deg Min Sec Select Back From the Position screen, to modify the setting for position format, use the 2-way Navi-Key to highlight and the preferred format and then use the left soft key, labeled Select.
PAGE 6
Recipient Enter Number Enter Email My Phonebook #1 My Phonebook #2 My Phonebook #3 Back • Quick GPS – to send your location to your preconfigured list of up to five (5) contacts (see Quick GPS List section for programming instructions). • New message – to append your location to a new message, allowing you to add additional text and then address the message to a new or existing contact.
PAGE 7
About the Security Menu You can perform the following functions using the Security menu: Security Security Phone Lock Sim lock Change PINs Select • Lock and unlock the phone • Enable and disable the SIM lock Back Phone Lock Enable phone lock Disable phone lock Select 5. The Enable phone lock option is highlighted. If not, use the 2-way Navi-key to scroll until it is. Back 6. Press the left soft key, labeled Select. • Change PIN and block PIN codes 7. The Enter PIN screen appears.
PAGE 8
Using the Change PIN Menu Security Phone Lock SIM lock Change PINs Select 3. Use the 2-way Navi-key to scroll until SIM lock is highlighted. Change the Phone PIN Code This capability allows you to modify the default PIN associated with your phone. Back 4. Press the left soft key, labeled Select. Starting from the Main Menu: Menu Call History Setup Security Help Select 1. Use the 2-way Navi-key to scroll until Security is highlighted. Back 2. Press the left soft key, labeled Select.
PAGE 9
Change the SIM PIN Code Change PIN Old PIN New PIN Verify PIN OK Clear 7. Enter your current PIN in the Old PIN field (the default PIN is 1234). Use the 2-way Navi-key to move to the next field and enter your new PIN into the New PIN field. Move to the Verify PIN field and enter the new PIN again. This capability allows you to modify the default PIN associated with your SIM card. Starting from the Main Menu: Menu Call History Setup Security Help Select 1.
PAGE 10
Change the SIM Card PIN2 Code Your SIM card PIN2 code is used to access fixed dialing settings. This fourto eight-digit code is issued to you when you subscribe to the capability. Starting from the Main Menu: Menu Call History Setup Security Help Select Change PIN Old PIN New PIN Verify PIN OK Clear 1. Use the 2-way Navi-key to scroll until Security is highlighted. Back Note: Scroll one down from Setup to view the Security option. 7.
PAGE 11
Call Barring PIN Call Barring may be enabled for incoming and/or outgoing calls in the Setup, Call Options menu. When you enable Call Barring, you are prompted for a PIN. The Call Barring PIN may be changed as follows. Change PIN Old PIN New PIN Starting from the Main Menu: Menu Call History Setup Security Help Select 1. Use the 2-way Navi-key to scroll until Security is highlighted. Back Verify PIN OK Clear Note: Scroll one down from Setup to view the Security option. 7.
PAGE 12
16: Troubleshooting Problem Solution Phone won’t power on. • Did you press and hold the power button for a minimum of three seconds to turn the phone’s power on? • Check the battery. Is it charged, properly fitted, and are the contacts clean and dry? You can’t make calls. • Check the antenna.
PAGE 13
You can’t make international calls. • Have you included the relevant codes? Enter 00 or + followed by the appropriate country code and the phone number. Your phone will not unlock. • Have you inserted a new SIM card? Enter the new PIN code the default PIN is 1111). The battery drains faster than normal. • Is your antenna fully extended and correctly angled? Do you have a clear unobstructed view of the sky? This helps use less battery power.
PAGE 14
• Power on the phone. 1. Press the red key three times 2. Press the left soft key. 3. Scroll down six times. 4. Press the left soft key again. 5.
PAGE 15
17: Certification & Compliance Info Export Compliance The 9575A is controlled by the export laws and regulations of the United States of America. The U.S. Government may restrict the export or re-export of this phone to certain individuals and/or destinations. For further information, contact the U.S. Department of Commerce, Bureau of Industry and Security or visit www.bis.doc.
PAGE 16
This Limited Warranty applies only to the Iridium branded 9575A (including hardware, software and firmware but excluding leather case) and the Accessories listed in Chapter 3 of this User Manual (collectively, “Product”) sold by Iridium or its authorized resellers and distributors (collectively, “Service Providers”). This Limited Warranty extends only to the first purchaser of the Product and is not assignable or transferable.
PAGE 17
18: Warranty, Service and Support Exclusions This Limited Warranty does not apply in the following circumstances: Normal wear and tear. Periodic maintenance, repair or replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of rated capacity and batteries that leak are covered by this Limited Warranty.
PAGE 18
: Warranty, Service and Support This Product is covered by a U.S.A. warranty. This Limited Warranty is applicable in all countries and is enforceable in any country or region where Iridium or its Service Provider offer warranty service for the Product. Outside of the U.S.A., any different warranty terms, liabilities and/or legal requirements of the country in which the Product is sold are specifically disclaimed by Iridium.
PAGE 19
18: Warranty, Service and Support Device on the Iridium system; (iii) modify the Product or any Product component, reverse-engineer the Product or any Product component or attempt to do so; or (iv) violate any applicable laws or regulations (collectively “Unauthorized Use”), you agree to defend, indemnify and hold Iridium and your Service Provider harmless with respect to any claims or actions by governmental entities or other third parties related to your Unauthorized Use and to pay all costs, damages, fi
PAGE 20
SOFTWARE LICENSE License. Conditioned upon compliance with the terms and conditions of this Limited Warranty, Iridium grants to you a nonexclusive and nontransferable license to use for your internal purposes the Software and the Documentation. “Documentation” means written information (whether contained in user or technical manuals, training materials, specifications or otherwise) pertaining to the Software and made available by Iridium with the Software in any manner.
PAGE 21
18: Warranty, Service and Support re-export, transfer and use of Iridium Software and Technology and will obtain all required U.S. and local authorizations, permits, or licenses. Iridium and you each agree to provide the other information, support documents, and assistance as may reasonably be required by the other in connection with securing authorizations or licenses. U.S. Government End User Purchasers.