User Instructions IQAir Atem X User Instructions EN v00.
Important Safety Instructions Read and save these instructions Danger Never immerse the product in water. Do not allow any kind of liquid to spill on, enter or come into contact with the product, including, but not limited to water, detergents or flammable solvents. Do not spray any flammable materials such as insecticides, fragrance or perfumes into or around the product.
Do not run the supply cord under carpeting. Do not cover the supply cord with throw rugs, runners or similar coverings. Do not route the supply cord under furniture or appliances. Arrange the supply cord where it will not be tripped over, away from traffic areas. Do not place the supply cord under strain. Do not unplug the appliance by pulling on the supply cord. To unplug, grasp the plug, not the supply cord. Never sit or stand on the product.
Contents Introducing Atem X ..............................................................................................................................33 Component Overview.................................................................................................................... 33 Setup & Positioning ............................................................................................................................44 Choosing a Suitable Location..........................................
Introducing Atem X The IQAir Atem X is a room air purifier for people who are serious about the air they breathe and the esthetics of their environments. Operation is via a control panel on the purifier or with the IQAir App. The purifier is equipped with built-in air quality sensors. All air quality parameters are shown in the IQAir App while the Air Quality Index is indicated on the purifier’s control panel. The built-in PM2.
Setup & Positioning Choosing a Suitable Location Atem X can be placed directly against a wall or any other vertical surface, such as a cupboard or beside a sofa. It does not have to be positioned “in the middle of the room”. Rotate the purifier to change the direction of the air flow as desired. Ideally position the purifier so that the control panel is facing upward, i.e.
Using Your Air Purifier Control Atem X from your smart phone with the IQAir App or the purifier’s touch sensitive control panel. The IQAir App is much more than a remote control - It gives you access to additional features for your Atem X and, more importantly, the App opens a world of air quality information within IQAir’s AirVisual community. Install the App Download and install the IQAir App on your Smartphone to control your IQAir Atem X.
The control panel The purifier’s control panel is located on the rear panel, behind the outlet grille. Power Smart Mode Air quality & Air cleaning performance Light Wi-Fi 1 2 Touch to turn ON. Touch again for standby1. White: ON Blue: Standby/OFF Touch to toggle between Smart Mode and manual performance setting. The indicator illuminates when Smart Mode is active. The indicated represents the measured air quality. Touch anywhere on the control to show and set the air cleaning performance level.
Ethernet Filter status Status of the Ethernet connection. Only for devices with an Ethernet port. White: Purifier is connected to the IQAir IoT Cloud via Ethernet and can be controlled remotely Off: Enough filter life remaining, no action required Yellow: Low remaining filter life, replace your filters soon Red: Replace your filters Flashing: No filter detected Air cleaning performance - Manual mode Air cleaning performance can be set manually with 8 power levels.
Filter replacement Atem X will let you know, in advance, when the filters need to be replaced. ! ! A yellow warning symbol on the control panel tells you that the filter set needs to be replaced soon, make sure that you have a replacement filter set. A red warning symbol tells you that the filter is full and needs to be replaced. Unplug the power cord and stow it in cord channel before changing the filters. Always replace the complete filter set, i.e. all three filter elements.
Step 2 Rotate Rotate the purifier body clockwise until it reaches the end stop. Rotating the purifier gives you easy access to each of the filters - you do not have to stoop down to change filters. Step 3 Remove the inlet grille Consider that the Impaktor, which is latched on the inside of the inlet grill could have trapped a lot of dust, hair and lint. Use a vacuum cleaner fitted with dust brush attachment to remove any loose dust from the grille and the Impaktor.
Step 4 Remove the used filter Press the latch towards the filter to unlock and remove the filter. Do not try to clean and/or reuse the filters. Filters may be disposed with household waste. Step 5 Insert the replacement filter Make sure that the filter’s orientation tab is facing towards the front of the purifier. Slide to the left Insert the filter into the inlet opening. Slide the filter towards the left. Press down Pivot the filter down into the inlet opening.
Step 6 Remove and clean the Impaktor Pull the center tab. Once removed, the Impaktor can be thoroughly cleaned with a soft brush or a vacuum cleaner fitted with a brush attachment. If required, the Impaktor can be cleaned further by rinsing under running water at a wahbasin and then letting it dry. After it has dried, the cleaned Impaktor can be inserted back into the inlet grille.
Technical Specifications Model Atem X Room Air Purifier Input voltage 220-240-Volt version 230 V~ 50 Hz (Refer to the type label on your device) 100-120-Volt version 120 V~ 60 Hz Power rating 110 W Sensors Particulate matter (PM2.
Additional Information Electromagnetic Compatibility (EMC) and radiation exposure For USA - FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
The type label showing the FCC ID 2AMBQ-ATEMX04/IC 22813-ATEMX04 is placed inside the device below the filter and visible during every filter change. Environment Help to preserve the environment. Do not discard the device with household waste. Bring it to the official recycling service near you. Filters may be disposed of with household waste. Do not burn used filters as fuel in a fireplace or for similar purpose. Product Storage When not in use, store your Atem X in a clean, dry place.