GET TO KNOW LUX BASE STATION 1. Security Lock 2. Articulating Hinge 3. Charge Pins 4. Removable Security Foot 5. Drlll Template 6. USB A-USB C Cable 7. USB Power Supply 8.
BASE STATION SET UP STEP 1 Insert USB cabin into bottom of Base Station and power supply. Plug power supply Into wal % STEP Bower adapter can be ran out the back of the Base or down through the table for & clean hidden cabin ciao using a 5/8” drill bit and the 8 drill template.
ATTACH CASE TO BASE STATION seer s Ensure the Case is properly seated for secure mounting and charging % Charging begins immediately. ® o Attach Case In portrait J or landscape orientation. = To remove, pull from lather left or right side.
REMOVING SECURITY FOOT Bottom STERN Use the provided lack tonal to turn both security screws CLOCKWISE nth ful stop,
SECURE BASE STATION TO SECURITY FOOT Use the provided tool to &} i'}? tum both security screws ‘COUNTERCLOCKWISE until full stop Place the Case back on the Base Station In the desired orientation.
LOCK THE LUX CASE TO THE BASE STATION Use the provided tool to turn security screw COUNTERCLOCKWISE until stop. The Case will remain locked to the Base Station, To unlock the Case, turn the security screw CLOCKWISE and remove the Case.
PORT AAS CANTON This product contains magnets Do not place in direct proximity with magnetically sensitive objects such as credit cards or exposed hard drives. Persons with pace makers are not recommended to use this products Use Products as directed Unspecified use could result in injury.
PORT Apple, P, [Pad Alr, Pad Pro and Lightning sre trademarks of Apple inc, registered in the US and other countries 3