User Manual

Q31

(When the device is not connected

)

In the connected device state:

(In the call state: there is a third-party call, click to hang up

the current call, and the third-party call is connected at the

same time);

(In the call state: there is a third-party call, click three times to

reject the third-party call);

In the call state: there is a third party incoming call, double-click

to keep the current call, and connect to the third party at the

same time (double-click again to switch the call);

The blue light flashes three times

The red and blue lights flash alternately, and the pairing

timeout will automatically shut down after 6 minutes

PAGE 1
The red and blue lights flash alternately, and the pairing timeout will automatically shut down after 6 minutes Q31 (In the call state: there is a third-party call, click to hang up the current call, and the third-party call is connected at the same time); Q31 (In the call state: there is a third-party call, click three times to reject the third-party call); (When the device is not connected) In the connected device state: In the call state: there is a third party incoming call, double-click to keep t