Specification

1 of 5

United States: Website: www.ipexna.com • Toll Free: 800-463-9572

Products manufactured by IPEX Inc. and distributed in the United States by IPEX USA LLC.

System 636

is a trademark of IPEX Branding Inc.

Date

introduction

System 636

CPVC Flue Gas Venting System is third party certified and listed to

ULC S636 in accordance with the CSA B149.1 Natural Gas and Propane Installation

Code. System 636 CPVC is intended for negative or positive pressure venting and

is classified as a “Type BH Class II B 90°C” flue gas vent. System 636 PVC Pipe

is grey in colour and is made to SCH 40 dimensions. Each length of vent pipe is

uniquely marked with a dual print line and each length includes a special orange

warning label in accordance with ULC S636. Every CPVC vent fitting, also grey in

colour, has a warning label indicating its vent class and maximum temperature

rating. System 636 CPVC has specially certified Cements and Primers which are

an integral part of the “system certification” of the product line. Substitutions

shall not be made for any component of a System 636 CPVC system, this

includes pipe, fittings, cements and primers. Substitution of a component will void

product warranty and ULC S636 system certification. System 636 venting shall

be installed in accordance with the certified System 636 Installation Guide, and

in accordance with the appliance manufacturer’s installation instructions. In the

event of conflicting installation instructions between the appliance manufacturer,

the System 636 installation guide and/or Code requirements, the most restrictive

requirement shall apply.

CPVC – Type BH Class II B 90ºC

Manufacturer:

Appliance Type:

Model Number:

Submitted by:

Approved by:

Appliance

Submittal Data Sheet

APPLICABLE

< STANDARDS >

< LISTED BY >

ULC S636

Standard for Type BH Gas

Venting systems

PAGE 1
CPVC – Type BH Class II B 90ºC Submittal Data Sheet Appliance Manufacturer: Appliance Type: Model Number: Submitted by: Date Approved by: Date introduction System 636® CPVC Flue Gas Venting System is third party certified and listed to APPLICABLE < STANDARDS > ULC S636 in accordance with the CSA B149.1 Natural Gas and Propane Installation Code. System 636 CPVC is intended for negative or positive pressure venting and is classified as a “Type BH Class II B 90°C” flue gas vent.
PAGE 2
CPVC – Type BH Class II B 90ºC Submittal Data Sheet Pipe and Fittings submitted for approval.
PAGE 3
CPVC – Type BH Class II B 90ºC Submittal Data Sheet Pipe and Fittings submitted for approval.
PAGE 4
CPVC – Type BH Class II B 90ºC Submittal Data Sheet Pipe and Fittings submitted for approval.
PAGE 5
CPVC – Type BH Class II B 90ºC About IPEX About the IPEX Group of Companies As leading suppliers of thermoplastic piping systems, the IPEX Group of Companies provides our customers with some of the world’s largest and most comprehensive product lines. All IPEX products are backed by more than 50 years of experience. With state-of-the-art manufacturing facilities and distribution centers across North America, we have earned a reputation for product innovation, quality, end-user focus and performance.