HLCRIO201，HLCRIO202，HLCRIO203
EN If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms. FR Si vous aimez votre produit iOttie, merci de nous le faire savoir en laissant un commentaire en ligne ou nous rejoindre sur nos réseaux sociaux. ES Si le gusta su producto iOttie, háganos saber dejando una reseña en línea, o conéctese con nosotros en nuestras plataformas sociales.
Getting Started At a Glance For optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch Connect. For software installation, please see the “Software Manual.” iOttie is not liable for possible damages due to product misuse. What’s in the Box: Mute Button Mounting Head, Base, and Dual Car Charger with Micro USB Cable Critical Information The Easy One Touch Connect is mounted with a semi-permanent adhesive tape. Each base is one-time use only.
Installation Option B Windshield Installation or Curved Glass Installation 1. Assembling the Mount Choose a location on the windshield and wipe any dust or debris from the surface. STICKY SUCTION CUP A. Connect the Mount Cradle with the Ball Joint. B. Then, tighten the Cradle Knob. 2. Selecting a Location Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B) 1. Peel off the protective film on the Suction Cup and press firmly onto the windshield. 2.
Using the Easy One Touch Mechanism Adjusting the Mount The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds. Mounting Step 1: Press the locking side arms in. 1. Cradle Knob 2. Foot Knob When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position. Located on the lower back of Cradle. Loosen to re-position mount’s foot. The Foot can be adjusted up & down or side-toside. 3. Telescopic Knob 4.
Operating temperature: -10-55°C Operating frequency range: 2402-2480MHz Rated Power: For Classic: 9.1dBm, BLE: 8.1dBm Declaration of Conformity Hereby, iOttie, Inc. declares that the radio equipment type Easy onetouch connect of HLCRIO201 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iottie.com This device may be used in each EU member state.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
