User's Manual

Installation Instructions
1. Check the product category you purchased, and wire it according
to the corresponding graphic method below;
2. Ask a professional electrician to install and prohibit live operation;
3. Please choose the bottom box of 50-60 mm depth for easy
installation of smart switch.
Figure 2
Control Your Smart Device with Voice
1. Our smart devices are connected to more than 8 mainstream smart
speaker voice controls;
the APP-Device Details page;
3. Download, install and register the smart speaker APP;
4. Bind your Tuya account after logging in to the smart speaker app;
5. You can use voice to control your smart devices after setting up
For detailed steps on setting up a smart device in the smart speaker
1. Click on the device in the TuyaSmart APP- the device control
interface appears;
2. Click on the upper right corner of the device control interface
3. You can see the supported third-party control details in the "Device
4. Click on the smart speaker brand icon you need to know to see the
3
4
5
6
7
9 10
11 12
13
14
8
Package content
Product *1
User manual *1
Screw *2
Precautions
APP download and device connects
with network instructions
1. Download and install the “Tuya Smart” or “Smart Life” APP.
Figure 1
Smart Switch User Manual
Please read the user maual carefully and keeping properly
Product General Parameters
1 2
This product is based on intelligent lighting controller, intelligent
dimming controller, curtain controller, scene controller, smart socket
and other intelligent products developed on Tuya intelligent platform.
This manual applies to multiple intelligent products category of
Intelligent Lighting Controller
Intelligent Dimming Controller
Intelligent Curtain Controller
Intelligent Scenario Controller
Intelligent Socket Controller
Input Voltage: AC 100 ~ 240V 50-60Hz
Power Supply Mode:Live Wire + Neutral Wire
Control Mode: APP remote control, Local touch control, AI speaker control
Support System: Android & IOS
Standby Power Consumption: =0.5W
Housing Material: PC flame retardant material
Panel Material: Tempered glass
WiFi Wireless Standard: Support 802.11 b/g/n
15
Network Addition Instructions
The following smart speakers are supported (continuous update):
b: Click the “+” symbol in the upper right corner of the APP, select
the device type you want to add, and enter the Add Device interface;
c: Then follow the steps of Figure 1 - Figure 3 and the APP prompt to
operate, until the addition is successful.
Figure 3
1. The signal indicator of the device is off before it connects with the
network. After connecting with the network, it is blue and bright;
2. The status indicator of the device's switch is blue when turned on
and white when turned off;
3. The device has a slight fever during use, which is a normal
phenomenon;
4. Please do not disassemble the equipment privately;
5. Please contact professional electrician to install before installation.
It is forbidden to operate with electricity!
2. Sign in APP or sign up APP's account:
3. Add device to the network (APP operation)
a: Press and hold any button of the smart switch for 6-8 seconds, wait
for the signal indicator to start flashing quickly, open the APP. Make
the following settings; As Figure 1 to Figure 3 show.
Type 86 package size: 100*100*40mm
Type 120 package size: 140*93*43mm
It can realize local touch control, APP remote control and intelligent
voice control.
WiFi\ZigBee\Bluetooth Mesh three communication modes. As follows:
Go to the APP page and follow the prompts to register with your
mobile phone number and log in to the app.
your smart devices in the smart speaker app.
Such as:
2. You can view the supported third-party control categories through
APP, please refer to the introduction in “Tuya Smart” APP;
the "Device Details" interface appears;
Details" interface;
detailed use of this speaker.
长=80*8=640mm
宽=76mm
Smart wall socket use note:
1、Wall sockets include, with USB socket, 16A dedicated socket,
etc., please strictly follow the product label.
2、The network light of the wall outlet is blue ;
the switch status light is red.
Single fire switch use note:
1、Please use branded lamps larger than 5W.
2、If there is flicker or other phenomenon during use, please
contact the merchant to communicate.
3、After the single fire switch is connected to the network, the
network light is off.
L
L1
L2
L3
L4N
Input:AC100～240V
Output：≤600W/gang
CAUTION：
strictly installed by a licensed electrician
L ：Live wire N：Neutral wire
L1:Connect 1 control wire
L2:Connect 2 control wire
L3:Connect 2 control wire
L4:Connect 4 control wire
Lighting Panel Wiring Diagram
Note:
Light switch suppor ts 1-4 gang
Please indicate the connection according
to the physical terminal!
Please correctly distinguish the Neutral wire
and the Live wire!
L
M11
M12
N
Input:AC100～240V
Output：≤600W/gang
Load：AC motor
CAUTION：
strictly installed by a licensed electrician
L ：Live wire N：Neutral wire
M11:Motor for ward wire
M12:Motor reversal wire
Curtain Panel Wiring Diagram
Note:
Please indicate the connection according
to the physical terminal!
Please connect the motor for ward and reverse
connection correctly.
Please connect the for ward and reverse lines
of the motor correctly.
LN
Input:AC100～240V
Output：Unloadable load
CAUTION：
strictly installed by a licensed electrician
L ：Live wire N：Neutral wire
The scene switch only needs to
connect the “L” and the “N”.
Scene switch does not suppor t voice
control
Scene Panel Wiring Diagram
Note:
Please indicate the connection according
to the physical terminal!
Please correctly distinguish the Neutral wire
and the Live wire!
L
L1
L2
L3
Input:AC100～240V
Output：≤5-300W/gang
CAUTION：
strictly installed by a licensed electrician
L ：Live wire
L1:Connect 1 control wire
L2:Connect 2 control wire
L3:Connect 2 control wire
Single wire switch
Note:
Please indicate the connection according
to the physical terminal!
L NG
Smart wall socket
Input:AC100～240V
Output：Use by product label
CAUTION：
strictly installed by a licensed electrician
L ：Live wire
N：Neutral wire
G：Ground wire
Socket Panel Wiring Diagram
腾讯 小 微腾讯 小 微腾讯 小 微
若琪若琪若琪
DuerOSDuerOSDuerOS
amazon alexa
Google Assistant
叮咚叮咚叮咚
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class
B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not
installed and used in accordance with the instructions,may cause harmful interference
to radio communications.However,there is no guarantee that interference will not occur
in a particular installation.if this equipmemt does cause harmful interference to radio
or television reception,which can be determined by turning the equipment off and on,the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minumum distance of 20 cm between
the radiator and your body.