Assembly Instructions

ManualsBrandsIONX ManualsElectronicsCommunications Management Unit

IONX LLC

300 Willowbrook Lane, Suite 320

West Chester, PA 19382

Run by

Name: Carl Swartz

Email: cswartz@ionxlive.com

Workspace: IONX Production

Date: Aug 05, 2019

2ADEPCMUE6-B PartsLst

Run Description: Item Number: CMU-E6X, Item Name: Edge E6 Extended life-Asset Monitoring Device with Mesh Overlay, Revision: D

level item_number item_name revision description quantity unit_of_measure line_number reference_designator bom_notes

0 CMU-E6X Edge E6 Extended life-Asset Monitoring

Device with Mesh Overlay

D Edge E6 Extended life-Asset Monitoring

Device with wireless sensor and Mesh

Overlay capability

1 213162 Silicone Foam Pad, .75" x .75" with PSA

backing

B Old P/N 445-00058 14 EA 7

1 213623

Silicone Foam Pad, .75" x .75"x.063" Thk w/

PSA backing

Silicone Foam Pad, .75" x .75"x.063" Thk w/

PSA backing Continuous operating

temperature range -40C to 105C (min.)

4 EA 8

1 214570 Label, IS, substitution warning C Label, IS, substitution warning 1 EA 16 IS Part

1 258464 Label, AAR compliance, yellow E Label, AAR compliance, yellow 1 EA 11

1 300842 Screw, Plastite 48-2, 8-16 x .75, Pan Head,

Torx, 18-8 SS

B Screw, Plastite 48-2, 8-16 x .75, Pan Head,

Torx, 18-8 SS

10 EA 10

1 300994 Shipping Carton, T4X / T5X, Inner A Shipping Carton, T4X / T5X, Inner 4 EA 13

1 300995 Shipping Carton, T4X / T5X, Outer A Shipping Carton, T4X / T5X, Outer 1 EA 14

1 301269 Label, blank, 2"x1", White, Thermal transfer

imprintable polyester

A Label, blank, 2"x1", White, Thermal transfer

imprintable polyester with extra aggressive

2 mil Heavy Coat Weight (HCW) acrylic

adhesive. UL file MH16411. Maximum

operating temperature 100C.

1 EA 18 IS Part

1 301537 Tape, VHB 4905 Clear, 3/4 in x 72 yd 20.0

mil

A 3M VHB Tape 4905 Clear, 3/4 in x 72 yd

20.0 mil

0.75 IN 20

1 303406 Battery Pack, LiSOCL2, 7.2V 76AHr,

IS_Ed6

E Battery Pack, LiSOCL2, 7.2V 76AHr,

IS_Ed6 (8 D Cells)

1 EA 6 IS part

2 303375 PCBA, Battery Board Ed6 D PCBA, Battery Board Ed6 1 EA 1 IS part

3 300753 Res, thick film, 0.33 ohm, 1W, 1%, 1210 A 8 EA R1,R2,R3,R4,R5,R6,R7,R8 IS PART

3 303374 FAB, Battery Board Ed6 C3 Fabrication Files for the Battery Board

upgrades to meet the Edition 6 standards

1 EA IS PART

3 303378 FUSE BOARD MNT 630MA 125VAC/VDC B FUSE BOARD MNT 630MA 125VAC/VDC 1 EA F1 IS PART

3 303524 DIODE SCHOTTKY 40V 2A SMA A 3A parts acceptable 12 EA D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D1

IS PART

3 740-00014 IS and RoHS Requirements G IS and RoHS Requirements 1 EA

3 780-00034 SCH, Battery Board, Ed6 C5 Schematic for the Battery Board to meet

Edition 6 of IEC 60079-11 Standard

0 EA IS DOCUMENT

2 303376 Cable Assembly, Battery Pack, 7.2V, E-

Series

B Cable Assembly, Battery Pack, 7.2V, E-

Series

1 EA 2 IS part

3 300871 Connector, Receptacle, 3mm, 2pos, Mate-n-

lok

A UL File E28476 COT is -40C to 105C. 1 EA

3 300872 Connector, Socket, 20-24 AWG, Gold

Crimp

A UL File E28476 COT is -40C to 105C. 2 EA

Summary of content (9 pages)

PAGE 1
IONX LLC 300 Willowbrook Lane, Suite 320 West Chester, PA 19382 Run by Name: Carl Swartz Email: cswartz@ionxlive.com Workspace: IONX Production Date: Aug 05, 2019 2ADEPCMUE6-B PartsLst Run Description: Item Number: CMU-E6X, Item Name: Edge E6 Extended life-Asset Monitoring Device with Mesh Overlay, Revision: D level item_number 0 CMU-E6X 1 1 1 1 1 item_name Edge E6 Extended life-Asset Monitoring Device with Mesh Overlay revision D 213162 Silicone Foam Pad, .75" x .
PAGE 2
3 303546 SILICON WIRE 24AWG BLK 500' A 0.55mm insulation thickness, UL3239 style, REI HSING WIRE CO LTD UL file E108485, Continuous operating temperature -50C to 150C. 100 EA EA = mm IS Part 3 303547 SILICON WIRE 24AWG RED 500' A 0.55mm insulation thickness, UL3239 style, REI HSING WIRE CO LTD UL file E108485, Continuous operating temperature -50C to 150C. 100 EA EA = mm IS Part 2 303413 ITW Formex GK Polypropylene Sheet, 0.45mm (.017") Thick, Black B ITW Formex GK Polypropylene Sheet, .
PAGE 3
303658 Tape, Acrylic adhesive transfer tape 9082, Clear A Tape, Ultra High Temperature Acrylic adhesive transfer tape 9082, Clear, UL file MH17478, Maximum operating temperature 120C 1 AR E Series Battery Pack Serialization A 1 EA 0 N/A 303429 Enclosure Lid, ExX 303430 Enclosure Base, ExX 303446 Screw, Plastite 48-2, 6-19 x .
PAGE 4
300884 Cable Assembly, Power, 3.2A, 250V C 4 301159 CAP CER 47PF 50V 5% NP0 0402 B 4 301200 Loctite 401 Cyanoacrylate Adhesive, .7oz (20g) bottle, Clear B 401 PRISM is a low viscosity, fast curing, single component cyanoacrylate adhesive. It is specifically formulated for difficult to bond substrates and is less dependent on surface moisture for cure speed than other standard CA grades. 20 gram bottle. Continuous operating temperature -40 to 85C. 4 301487 CAP CER 0.
PAGE 5
4 4 4 4 4 301801 301809 301812 301813 301832 4 4 4 IC NFC/RFID TAG 64KB EEPROM 8SOI IC BUS TRANSCVR 4BIT 16-UQFN IC LOAD SWITCH LV DUAL SOT23-8 IC SWITCH SPDT SC70-6 Supercap, 120mF, 20%, 5.5V B B A C A IC NFC/RFID TAG 64KB EEPROM 8SOI IC BUS TRANSCVR 4BIT 16-UQFN IC LOAD SWITCH LV DUAL SOT23-8 IC SWITCH SPDT SC70-6 ESR = 140 mOhm 20x18x3mm -40 to +85C 1 4 2 1 1 301837 RES SMD 226K OHM 1% 1/10W 0402 301838 CAP CER 0.
PAGE 6
4 4 4 303542 IC OPAMP GP 3KHZ RToR TSOT23-5 303544 IC REG BUCK ADJ 0.3A SYNC 10MSOP 303545 Res, thick film, 10.0K, 1/10W, 1%, 0603 A A A '-40 to 125C IC REG BUCK ADJ 0.3A SYNC 10MSOP 4 4 4 303557 RES 35.7 Ohm 1% 2W 2512 303565 Diode, Schottky, 40V, 3A, SMB 303615 Wire, 26AWG, 7/34, 150V, IR XLPVC, White, 1000 FT A B A RES 35.7 Ohm or 36 Ohm 1% 2W 2512 Diode, Schottky, 40V, 3A, SMB 0.
PAGE 7
4 4G_AUX_COMM_MODULE-XX 4G Auxiliary Communications module for the EMU 5 06_4G_COMM_OPTION 06_4G_Communications_Option for Eseries 6 4G_DUST_MANAGER_SUB-CIRCUIT 4G_Dust Mesh Network Manager Sub Circuit 7 301487 CAP CER 0.1UF 50V 10% X7R 0402 7 301761 Crystal 32.7680kHz 20ppm 12.
PAGE 8
7 175-00016 7 7 7 7 300800 301488 301631 301741 FAB, E6-MOTE for EMU CAP CER 47UF 16V 20% X5R 1210 CAP CER 4.7UF 6.3V 10% X5R 0402 CAP CER 10PF 5% 50V NP0 0402 CBL PLUG-OF-NAILS 10-PIN TC2050 F D B B B FAB, E6-MOTE for EMU CAP CER 4.7UF 6.3V 10% X5R 0402 CAP CER 10PF 5% 50V NP0 0402 CBL PLUG-OF-NAILS 10-PIN TC2050 1 1 4 6 0 EA EA EA EA EA C79 C10,C12,C20,C70 C17,C61,C72,C74,C76,C78 J1, J2 7 301761 Crystal 32.7680kHz 20ppm 12.5pF 90 kOhm -40°C - 85°C Surface Mount 2-SMD A Crystal 32.
PAGE 9
7 780-00066 SCH, E6-MOTE for 4G CMU A Schematic for the E6-MOTE used in the EMU using the DUST Eterna Manager with no external flash or memory. 4G CMU uses 47pF 10% capacitors. 0 EA 4 780-00061 Schematic, CMU3 D Schematic for the CMU3 board. this board is designed with ME910-WW LTE and 2G cellular modem.