Assembly Instructions

IONX LLC
300 Willowbrook Lane, Suite 320
West Chester, PA 19382
Run by
Name: Carl Swartz
Email: cswartz@ionxlive.com
Workspace: IONX Production
Date: Jul 19, 2019
2ADEPCMUE5-B PartsLst1.pdf
Run Description: Item Number: CMU-E5S, Item Name: Edge E5S Asset Monitoring Device, Revision: D
level item_number item_name revision description quantity
unit of
measure
line
number reference_designator bom_notes
0 CMU-E5S Edge E5S Asset Monitoring Device D Edge E5S Asset Monitoring Device EA
1 213285 Enclosure lid, CMU, E Series - S Case G Enclosure lid, CMU, E Series - S Case 1 EA 2 IS Part
1 213464 Box, Edge S Series, Outer Carton D Box, Edge S Series, Outer Carton (10 Pack) 0.1 EA 16
1 213465 Box, Edge T4S / T5S, Large Partition A Box, Edge T4S / T5S, Large Partition 0.1 EA 17
1 213466 Box, Edge T4S / T5S, Pad A Box, Edge T4S / T5S, Pad 0.1 EA 18
1 213467 Box, Edge T4S / T5S, Small Partition A Box, Edge T4S / T5S, Small Partition 0.4 EA 19
1 213622 Silicone Foam Pad, .75" x .75"x.032" Thk w/
PSA backing
C Silicone Foam Pad, .75" x .75"x.032" Thk w/
PSA backing Continuous operating
temperature range -40C to 105C (min.)
2 EA 12
1 213623 Silicone Foam Pad, .75" x .75"x.063" Thk w/
PSA backing
B Silicone Foam Pad, .75" x .75"x.063" Thk w/
PSA backing Continuous operating
temperature range -40C to 105C (min.)
4 EA 5
1 214570 Label, IS, substitution warning C Label, IS, substitution warning 1 EA 20 IS Part
1 258464 Label, AAR compliance, yellow E Label, AAR compliance, yellow 1 EA 10
1 300842 Screw, Plastite 48-2, 8-16 x .75, Pan Head,
Torx, 18-8 SS
B Screw, Plastite 48-2, 8-16 x .75, Pan Head,
Torx, 18-8 SS
4 EA 9
1 301269 Label, blank, 2"x1", White, Thermal transfer
imprintable polyester
A Label, blank, 2"x1", White, Thermal transfer
imprintable polyester with extra aggressive 2
mil Heavy Coat Weight (HCW) acrylic
adhesive. UL file MH16411. Maximum
operating temperature 100C.
1 EA 23 IS Part
1 303382 Battery Pack, LiSOCL2, 7.2V 19AHr, IS,
Ed6
G Battery Pack, LiSOCL2, 7.2V 19AHr, IS,
Ed6 (2 D-Cells)
1 EA 7 IS Part
2 303375 PCBA, Battery Board Ed6 D PCBA, Battery Board Ed6 1 EA 1 IS part
3 300753 Res, thick film, 0.33 ohm, 1W, 1%, 1210 A 8 EA R1,R2,R3,R4,R5,R6,R7,R8 IS PART
3 303374 FAB, Battery Board Ed6 C3 Fabrication Files for the Battery Board
upgrades to meet the Edition 6 standards
1 EA IS PART
3 303378 FUSE BOARD MNT 630MA 125VAC/VDC B FUSE BOARD MNT 630MA 125VAC/VDC 1 EA F1 IS PART
3 303524 DIODE SCHOTTKY 40V 2A SMA A 3A parts acceptable 12 EA D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D1
2
IS PART
3 740-00014 IS and RoHS Requirements G IS and RoHS Requirements 1 EA
3 780-00034 SCH, Battery Board, Ed6 C5 Schematic for the Battery Board to meet
Edition 6 of IEC 60079-11 Standard
0 EA IS DOCUMENT
2 303376 Cable Assembly, Battery Pack, 7.2V, E-
Series
B Cable Assembly, Battery Pack, 7.2V, E-
Series
1 EA 2 IS part
3 300871 Connector, Receptacle, 3mm, 2pos, Mate-n-
lok
A UL File E28476 COT is -40C to 105C. 1 EA

Summary of content (8 pages)