User's Manual

Connect
Button










Laser Pointer
Laser Pointer
ENGLISH
Lynx-P2
2.4GHz Presenter Mouse
Thank you for your purchasing Lynx-P2 2.4GHz Presenter Mouse.
Before you use this product, please read this manual thoroughly and
use this product correctly. After you read this manual, please keep it
in place and refer to it when necessary. If you have any questions,
please contact us at the website www.ione.com.tw,
www.ione-usa.com or www.ione-europe.com.
Supplied With The Product:
The following items are included in the package. Please make sure
all items are included as you open the package. If there is any item
missing or damaged, please contact the reseller who sold you this
product, or our support center.
- Presenter Mouse
- Mini Dongle Receiver
- 2 AAA Batteries
- User's Guide
System Requirements:
IBM or compatible PC system
Work with Win 2000/ME/XP/Vista
USB port
Function Description
Off: Turn off your Presenter Mouse.
Presenter Function : Control your presentation function
Mouse Function: This function is the same as regular mouse on
table.
Function Key: One click --- F5 (Open PowerPoint File); Double
click --- ESC
ENGLISH
Right Button: the same as right button of mouse
Left Button: the same as left button of mouse
Page-up
Page-down
Connect Button
Laser Pointer Trigger
ENGLISH
Hardware Installation
Step1: Insert 2 AAA batteries into the battery compartment with
correct polarity.
Step2: Please refer to the +, - diagram inside the battery
compartment.
Step3: Turn on your computer and plug the receiver into a USB port
of your computer.
Step4: Your computer will detect this USB device automatically.
ID Setting
The product has been pre-set and the mouse and dongle receiver
are already paired. It is not necessary to do the ID setting when you
use the mouse for the first time. However, the connection may be
lost due to RF interference of environment. Hence, it may be
necessary to re-set the connection ID. Please follow the process
below for the ID setting.
Step 1: Press the connect button on the receiver. The LED of
receiver dongle connection will start to blink.
ENGLISH
Step 2: Press the connect button on the back of Lynx-P2 within 8
secends.
Step 3: The LED on the receiver will blink faster for a while. This
means that ID setting is completed.
Cautions
1. If the Wireless Mouse does not work properly, please go back to
step 1.
2. Keep the batteries out of reach of children.
3. Do not mix different types of batteries; for example, carbon battery
and alkaline battery.
4. Remove the batteries if the device will be not to use more than a
month
5.The laser beam may cause injury of eye, please do not point to eyes
directly.
ENGLISH
TROUBLE SHOOTING
ENGLISH
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
FCC Statement
Any changes or modification not expressly approved by the party
responsible could void the user's authority to operate the devics.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the installation, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not
occur in a particular installation. if this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
- Consult the dealer or an experienced radio / TV technician for help
You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to
operate the equipment.
User's Guide
Lynx-P2
2.4GHz Presenter Mouse
Further
questions.
The LED of receiver
does not light or
blink when the
receiver is plugged
into USB port of the
computer
Symptom
Possible Reason
Remedy
The computer is off
or the USB port is
without power supply
Turn on your computer or
plug into a USB port with
power supply
The mouse cursor
on the screen does
not move smoothly
Radio frequency is
interfered or the
distance is beyond
RF transmitting
range
Move the mouse closer to
the mini receiver until the
mouse cursor move
smoothly.
Please send an email to
[e-mail],
[e-mail] or
[e-mail]
1 2 3 4
5 6
LED RADIATION
DO NOT STARE INTO BEAM
CLASS 2 PRODUCT
POWER: 1mW
WAVELENGTH: 650nm