User's Manual

ManualsBrandsIone International ManualsComputers & Accessories27MHz OPTICAL MOUSE

Lynx-R7 A

27MHz 5-Button Optical Mouse

User Guide

Thank you for purchasing Lynx-R7A 27MHz 5-Button Optical Mouse. Please read

this user guide to help you using this product easily. If you have any questions,

please contact us at the website www.ione.com.tw, www.ione-usa.com or

www.ione-europe.com.

Introduction

Lynx-R7A is designed for short distance wireless operation of personal computer.

Plug in Lynx-R7A’s receiver to your USB port and you can use this wireless mouse

without cable cluttering on your desk. The wireless operational range can reach up

to 1.5 meters in open space depending on the radio interference in the environment.

Lynx-R7A is equipped with high performance CMOS process optical sensor and

performs high speed motion detection up to 37 inches per second. The embedded

800dpi optical resolution sensor can accurately estimate motions over a wide range of

surfaces.

For using in the USB environment of Win 98SE/ME/2000/XP/XP MCE/VISTA

Lynx-R7A does not require any driver. Just plug and play. You can enjoy this

convenient device.

Feature

． Fashion and modern design

． 5-button optical mouse with scroll wheel

． 27MHz RF technology with 256 IDs

． 800 dpi optical resolution with motion detection up to 37 inches/sec

． Wireless operational range can reach up to 1.5 meters in open space

． Low power consumption with smart power saving function

． Battery low indicator

Package Contents:

1. 27MHz 5-Button Optical Mouse

2. Dongle Receiver

Summary of content (5 pages)

PAGE 1
Lynx-R7 A 27MHz 5-Button Optical Mouse User Guide Thank you for purchasing Lynx-R7A 27MHz 5-Button Optical Mouse. Please read this user guide to help you using this product easily. If you have any questions, please contact us at the website www.ione.com.tw, www.ione-usa.com or www.ione-europe.com. Introduction Lynx-R7A is designed for short distance wireless operation of personal computer.
PAGE 2
3. 2 AA Batteries 4. User's Guide System Requirements: 1. IBM or Compatible PC System 2. Win 98SE/ME/2000/XP/XP MCE/VISTA Hardware Installation Step1: Insert 2 AA batteries into the battery compartment with correct polarity. Step2: Please refer to the +, - diagram inside the battery compartment. Step3: Turn on your computer and plug the dongle receiver into a USB port of your computer. Step4: Your computer will detect this USB device automatically. Software Setup: The mouse does NOT require a driver.
PAGE 3
Step3: Extract the .zip-file. Step4: Navigate to the Folder to which you extracted the zip-file and double-click the icon or execute the .exe file to install the software. Step5: Select the interface. Step6: Follow the steps to complete the installation. Note: If you still have problems with this program, please read the “help” file or contact us at ione@ione.com.tw or support@ione-europe.com Key definition 1. Left Click 2. Right Click 3. Scroll Wheel Button 4. Previous Web Page 5. Next Web Page 6.
PAGE 4
Step 1: Plug the dongle receiver into your computer. For the best performance, please plug the dongle receiver into the front USB port of your computer, or use the USB extension cable to place the dongle receiver 20cm away from monitor, speaker, power supply, USB hub and other RF interference sources. Step 2: Press the connect button on the dongle receiver. The LED will start to blink. Step 3: Press the connect button on the bottom of the Wireless Mouse within 8 seconds after Step 2.
PAGE 5
move the mouse. The mouse cursor on the screen does not move smoothly Radio frequency is interfered or the distance is beyond RF transmitting range Move the mouse closer to the dongle receiver until the mouse cursor move smoothly. After ID synchronization procedure several times, the device still can't work. Device can't connect to the receiver and ID setting is messed up. Press and hold the connect button on the receiver for 10 seconds. Then removed the batteries from the mouse and re-installed them.