Chapter Four Client Appliance Network Access The Network Access service permits a « Right-click the Local Area Connection Bluetooth client to use a Local Area icon and select Properties Network connection that is physically attached to another Bluetooth device (the server).
Click YES in the confirmation dialog box to enable Internet connection sharing Network Access Setup for Windows 98SE & Windows Me Internet Protocol routing software is required on Windows 98SE and Windows Me servers; a downloadable trial version of Win Route Lite is available on the Tiny Software, Inc. Configure the server: » From the Windows Control Panel, double-click the Network icon. » On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver (scroll down if necessary).
connection as if it were a hardwired serial cable between the devices. a ie stn Poe tots toe Cpe 3 Ese dais (tech To establish a Bluetooth serial port connection Connections are initiated from the client: Satire Bluetooth Neighborhood Folded displace bucktooth devices in o On the client, in the Folders pane of My Bluetooth Places, select Entire Bluetooth Neighborhood.
mend Tm EVALUATE LSD Blu Determine the communications port being used by the server The application on the server must be configured to use the correct communications port.
Though not recommended, connections can also be closed from the server: » On the server, in the Folders pane of My Bluetooth Places, select (highlight) My Device. » In the right pane of My Bluetooth Places, right-click Bluetooth Serial Port and then select Stop to close the service. The service must be re-started before it will be available to remote devices (right-click Bluetooth Serial Port and select Start from the pop-up menu).
« In the Connect to dialog box, fill in your user name, password, and the phone number to be dialed, and then click the Dial button. Select the Save password check box and the dialog box will not appear for subsequent connections to the same phone number. 1 connect Interconnection EE Sl Conceal | Propitiates | Help } Dial You can now open a web browser and connect to the Internet.
« In the Folders pane of My Bluetooth Places, right-click the server that will provide the Fax service and select Discover Available Services from the pop-up menu to update the available services list. The available services will be displayed in the right pane of My Bluetooth Places. Teen) Fie TOK thew Knothole © Favorites Took Help. Pd v5 Boards frolickers Priory B Xa BX Akita.
« Still in the Folders pane of My Bluetooth Places, click the plus sign in front of Public Folder to expand that folder. If there are additional folders inside the expanded folder then those additional folders may have to be expanded. Folder contents are displayed in the right pane of My Bluetooth Places. Types of File Transfer operations In the right pane of My Bluetooth Places, right-click a folder item and select an option from the pop-up menu.
Information Exchange The Information Exchange service provides a way to send and receive Microsoft Outlook items to and from another Bluetooth device. Supported Outlook items are « Business cards and *.ved) « Calendar entries o Notes « Messages There are three types of operation Send ends an object to another device. « Receive requests an object from another device. » Exchange ends a client object and receives a server object.
operations on another Bluetooth-enabled device browse, drag/ drop, open, print, cut/copy, paste, delete, rename, etc. « Information Exchange establishes a Bluetooth wireless connection between two devices so that they can exchange personal information manager data such as business cards, calendar items, email messages, and notes.
Chapter Five Local Services Local Services are those services that Bluetooth server is capable of providing. The services provided by Bluetooth for Windows are « Bluetooth Serial Port » Dial-Up Networking » Fax « File Transfer « Information Exchange « Information Synchronization » Network Access The names of all the services are displayed even though the server may not be capable of supporting all services.
« Connected (COM#) the service is in use, the local port is COM#. + Device name if connected: » Empty field the service is not connected o A device name and/or Bluetooth Device Address identify the device that is using the service. Interrupt a connection from the server side © Right-click the local service and select Stop from the pop-up menu. » Right-click the local service and select Start from the pop-up menu to re-start the service.
Chapter Six Configuration Panel The Bluetooth Configuration Panel provides access to settings for Bluetooth services, hardware and security and for event notification. Access the Bluetooth Configuration Panel « From the Windows Control Panel, select Bluetooth Configuration or » In the Windows System Tray, right-click the Bluetooth icon, select Setup and then Configuration from the fly-out menu.
ft bi Te Bluetooth Don gle User's Guide devices). £1 Locations |" lent digestions | Williwaw | Versioning | Satisfactions i eed Acts | Discovers | information Exchange fll Stacks which chide San av mate to i comp Accessibility, Adding and Mor: {fio devious ig connect. =i Ad devices 10 connect. rt paras dis o cornet Limit access to your computer to specific remote devices From the Bluetooth Configuration Panel, Accessibility tab, in the Allow drop-down list box, select "Only devices listed below".
Et an TW iho nin ben lemma ten £5 phn eyetooth Dongle User's Guide Sly which Vidal disc hve docs 1 Bi carter La ge; Biol clarions caves is convulses 57 ; Bins: {Ink derision Send below th Cont. 7 Ack Devi + i Add Dido Launderette oem] vee « In the list of devices allowed to connect, « In the Devices with access... dialog box click the name of the device to be select the device(s) and click OK. removed and then click the Delete Multiple devices can be selected at the button.
change the time between auto inquiries, highlight the existing time and enter the new time. When My Bluetooth Places is first opened it performs an initial automatic search for devices even if "Look for other Bluetooth devices" is not enabled. Determine the devices that will be reported Bluetooth for Windows can screen out devices that you do not need access to.
Felt a doth 5 computer to arn Galois orbiter 10 beverage oly these devices. TON SEAT low is propulsion to vesicular Eugenio of 3 phis las’ pri ps of dom bier 8 specific pats add a device to the list of devices to be discovered, that device must be within range of the Bluetooth radio; devices that are not within radio range will not appear in the list of devices in the Discover able devices... dialog box.
with all other devices. To re-enable specific device discovery re-select "Report only selected Bluetooth devices." When all devices are deleted an error message will appear if report all Bluetooth devices is not selected. General Configuration Settings The settings on the General tab of the Bluetooth Configuration Panel determine device properties and basic system security settings.
The Hardware tab of the Bluetooth Configuration Panel provides basic information about the Bluetooth hardware installed on this computer and access to the Advanced Settings dialog box, if required: » Devices: « Name: the name of the device, e.g, Bluetooth Device « Type: the type of device, e.g., USB. * Device Properties: » Manufacturer: the name of the company that manufactured the device selected in the Devices section of this dialog box. » Firmware Revision: the manufacturer's firmware version number.
py — Hardware Advanced Settings Dialog Box When available, this dialog box is reached A ATI Pa S ionize from the Hardware tab of the Bluetooth Configuration Panel, Advanced Settings Piaf allows you to charge handmaid Configuration for your devise. Bir chm Ride ple Wanofachue:. Cambridge Sheen Radio Main Transmission Fos. — Ee] ewe | Depending on the country in which the hardware is sold and/or in which it will be used, the advanced button may not be present.
notification that the Bluetooth device attached to this computer must be reset before the change(s) will take effect. » Click the Yes button to reset the Bluetooth device now all open Bluetooth connections will be closed. « Click the No button to save the changes he changes will be applied the next time the Bluetooth device is reset or restarted.
LE Loon Sl ¥ directory on this computer that contains your electronic business card. Select the "Send Business Card on Request" option to allow remote devices to obtain your business card. Click the Browse button and navigate to the directory that contains your business card. Receive Business Card My Inbox Directory: the path to the directory on this computer where inbound Personal Information Manager Items such as Business cards, Notes, Calendar entries and messages will be saved.
Cad for the maximum number of connections Geom |. centrally | Divine 1 information Exchange + | allowed at any time. Lora Envisions + Cork Apportions | Honda | Servitor | *Destinations God cheek 3 civics more 30 2s seat apd ae up proper, » Dial-Up Networking has an additional setting for selecting the modem that will be used by the service. » Fax has an additional setting for selecting the modem that will be used by the service.
© The Dial-up network service © The LAN Access service « The Fax service » When a remote device attempts to send: « Information items © Synchronization information Associate a sound with a Bluetooth event From the Bluetooth Configuration Panel, Notifications tab: « In the Notify column of the Events list, select the check box associated with the event, » In the Sound area of the Notifications tab, click the Browse button and navigate to the sound file to be used for notification, To preview the sound file,
Chapter Seven Security Security Introduction Each service that the server provides can be configured to require: « Authorization the server operator must acknowledge all connection attempts before a connection is established. » Authentication the server requires a Personal Identification Number (PIN) code or a Link Key before a connection is established.
The server operator responds by clicking the Bluetooth icon in the Windows system tray to open a dialog box that displays: » The user-friendly name of the device attempting to connect » The local service to which the remote device is attempting to connect. The server operator may grant or deny access to the service by clicking an on-screen button, If the server operator ignores the Authorization notification access will be denied after a preset timeout.
information. Link Key A Link Key is a unique, internally generated, access code. Link Keys are generated automatically when devices are Aired or when Authentication is enabled. Link Keys are created by combining © The Passkey © The Bluetooth Device Address * An internally generated random number Pairing Devices Pairing allows you to avoid entering access information each time a connection is attempted. Paired devices share a unique Link Key, which they exchange when connecting.
Tooth Devices remain paired until the relationship is broken on both devices. To break a paired device relationship « In the Windows System Tray, right-click the Bluetooth icon, then Setup and select Security from the fly-out menu. « From the Bluetooth Security dialog box, in the Paired Devices list, select a device, click the Delete button and then click the done button. Pairing must be broken on both devices. Passkey A Passkey is an alphanumeric string up to 16 characters in length.
Guide » A check box that, when enabled, grants (authorizes) the connecting device access to all of the services on this computer (click the See Also button, below, for more information).
Chapter Eight Troubleshooting Cannot Connect to a Paired Device Paired devices are always displayed in My Bluetooth Places, even if the remote device is out of range or not powered up, Verify that the remote member of the pair is within radio range and powered up and then attempt the connection again Cannot discover services on an UN-paired remote device The remote device may not be powered up or may be out of range, « Verify that the remote device is powered up.
fy ded Controller Interface, if appropriate. Determine the LMP version number In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties section, the seventh entry provides Link Manager Protocol version number information.
