I. Product Introduction Gemini M2 is a wireless keyboard and mouse combo based on the Bluetooth standard. It works with your keyboard and mouse providing a wireless range meters. And because Bluetooth sets the bar for the emerging wireless world, you can add other compatible Bluetooth devices. Free yourself from desktop clutter and extra cables. Feature and specifications Key Features excellent performance working range up to 10m (line of sight). e Compliant Bluetooth specification version 1.
II . Battery Installation Keyboard Open the battery cap, which is on keyboard's backside, place 3 AAA Alkaline batteries, and put the cap back. Mouse Please switch the lock pin from back to front beneath the Mouse then hold the mouse and press the center part from front to back with the other hand to open it. Put two AAA Alkaline batteries according to its polarity.
thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer's recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. ®Remove the batteries if your device is to be stored for longer than a month without being used. II. Installation Do not plug the dongle in your computer before you complete the Bluetooth software installation.
7. Press “Cancel “to an 8. Press © Yes” to restart PC i naan inane pti 4 i == continue install Install Delphic: 2-1 Plug the dangle to your USB port 2-2 Execute the sextuplet in the “Delphic” folder. 2-3 Follow the instructed step by step t to © complete the installation. 1. Press “Next ” to ser 2. You can change the folder install this program or just use the default one. 3. Press “Finish” to restart your PC 3. Search the blue tooth device: 3-1 Windows will install! the CSR Device automatic.
RRC poo Concerning. wy no Ki mes — wary X23 Th dr “berated i button of mouse and 3. Confirm the configuration. device you want to connect. Press “Next” to continue, 5. Press “Skip” to 6. After the configuration, finish the click “Find Bluetooth configuration, devices” 7. Click the right 8. Press the Connector behind the mouse to link. | select *Reforest. It will i Seoul click the Icon of | search device mouse to enable it after the automatic CENT RESET RIE icon appear. press YES 0 hen a 9.
Interrupt a connection from the server side 32 CHAPTER SIX CONFIGURATION PANEL 33 Access the Bluetooth Configuration Panel 33 ACCESSIBILITY TAB 33 Accessibility Configuration Settings 33 Allow other devices to discover this computer 33 Control the types of devices that are allowed to connect to this computer 34 Accessibility, Adding and Deleting Devices 34 Latin access to your computer to specific remote devices 34 Add a device to the list of devices allowed to connect 34 Delete a device from the list of de
Chapter One Introduction to Bluetooth The term Bluetooth refers to a worldwide standard for the wireless exchange of data between two devices. In order to exchange data, two Bluetooth devices must establish a connection. Before a connection is established, one device must request a connection with another. The second device accepts (or rejects) the connection. The originator of the request is known as the client. The device that accepts (or rejects) the request is known as the server.
Bluetooth for Windows provides « Clients with the means: « To locate other Bluetooth devices in the immediate vicinity (inquiry) « Discover the services that those devices offer (discovery) « Connect to, use, and disconnect from those services. » Servers with the means to include/ exclude individual services in the list of services they provide to clients, « Extensive security, including: + Authorization « Authentication « Encryption.
Nome Marshal | Connected | Paired Desktop 4 pa Li Laptop IN Sodom > Network Accede Paint k= fe ] Paranormal Digital Assistant S = Primer En Telethons 8 5 Unknown Din a 2 Service Icons for Windows 9x, ME and 2K {Name TT [ Normal | Cannonaded | Wat Ava liable” | Lookup Howard Site Trans tor Apollo ge Information Exchange Parkway Access #, Serial Part 3 | Synchronization a Service Icons for Windows XP [Coma [normal | Connected [von Avaiiabia® | Diatom Networking | Git 5 Ea i Fax sy 23 3) Fife Pleasanter “7 py
CHAPTER ONE INTRODUCTION TO BLUETOOTH TRAY 19 BLUETOOTH 4 From BT Tray you can: 19 SEND TO BLUETOOTH 20 INTRODUCTION TO BLUETOOTH FOR WINDOWS 4 To use Send to Bluetooth 2 Most Bluetooth-cabled devices have the capability a 4 CHAPTER FOUR CLIENT APPLIANCE 21 Bluetooth for Windows provides 8 NETWORK ACCESS 21 Bluetooth for Windows supports.
Chapter Two Installation Installing Bluetooth for Windows (BTW) SYSTEM REQUIREMENTS Bluetooth for Windows (BTW) runs under Microsoft® Windows® 2000, Windows 98 Second Edition (SE), and Windows Millennium Edition UNINSTALL PREVIOUS VERSION OF BTW Any previous version of the BTW software must be uninstalled before installing an upgraded version. There are two ways to remove BTW: 1. The Install Shield® Wizard automatically uninstalls the previous version when a new version is installed. 2.
Tethering precised penknives. tend frost vestal your stingy for th instigation changes fade to \Wisdom Blister Software 121810 take elfish Click Yes to es ha now or Na you pla to restart ler. Ed ew | INSTALL BTW Windows 98 Second Edition (SE) and Windows Millennium Edition (Me) BTW requires that a number of Microsoft® Windows® networking components be installed before BTW can be successfully configured.
3. Follow the instructions on the screen: a) On the Welcome screen, click the Next button. b) (Skip this step if you have already uninstalled any previous version of BTW) Should Install Shield Wizard find a previous version of BIW on the personal computer, it will attempt to uninstall it. On the Remove the Program screen, click the Remove button. The Uninstalling Bluetooth Software screen displays the uninstall process progress. When complete, the system will reboot.
Chapter Three Basic Operations Start Program way 1 oe Hp—— J Br [P. arson wc ER SET. i 58 way 2 13 Find Bluetooth Devices Search for Devices looks for Bluetooth devices in the vicinity and displays the devices it finds in My Bluetooth Places. To start the Search for Devices: In the Folders pane of My Bluetooth Devices, select (highlight) a device name * Open the Bluetooth menu and select Search for Devices. The Bluetooth menu is only visible when My Bluetooth Places is active.
Periodic Search for Devices Bluetooth for Windows can be configured to automatically search for devices ona regular basis (Bluetooth Configuration Panel >Discovery tab). One of the advantages of Bluetooth is the mobility the wireless connections allow. However, mobility means that devices may move in or out of connection range during the time between the automatic updates performed by Bluetooth for Windows.
nid Im men fn Bhp ee te EVE Tooth Dongle User's Guide Configuration Panel > Accessibility tab, © Dial-up Networking allows a Bluetooth on the UN-listed device). client to use a modem that is physically attached to the Bluetooth server. 21x] * Fax allows a Bluetooth client to tirelessly Hardware, | Wotan | ‘Waitpersons | send a fax using a device that is physically attached to the Bluetooth server, Loss Sew ices “| Electrification | Regional | Aooesebity Disco |.
All Bluetooth servers do not necessarily provide all of these services. For example, network gateways only provide access to the Local Area Network (the Network Access service), Bluetooth Connection Status The Bluetooth Connection Status dialog box displays information about the state of a connection and provides a means to disconnect an active connection. Display the Connection Status dialog box » In My Bluetooth Places, from the Folders pane, select (highlight) a device.
Configuration Panel, Hardware tab, click the Advanced button, and then change the setting in the Maximum Power Transmission drop-down list. The controls in the Bluetooth Connection Status dialog box are © Properties button: displays the Bluetooth» On the first Connection Wizard scree: Properties dialog box for this connection. « In the Select a Service drop-down menu, « Disconnect button: closes this select the type of connection that will be connection. established.
Fre ve " nosy Bo 3, Hue To oF 7 Select Bluetooth Service dialog box is not offered by the device that was selected in the elect a device that provides the service drop-down menu, then the Select Bluetooth Service dialog box appears with a list of services that are offered by the selected device: © Select a different service from the Select Bluetooth Service dialog box and click the OK button to proceed or « Click the Cancel button to close the Select Bluetooth Service dialog box and return to the previous s
default device to be connected to when establishing the Bluetooth Serial Port connection. Bluetooth Tray The Bluetooth Tray resides in the Windows System Tray, which is normally located in the lower-right corner of the « Exchange Business Cards with another screen. Bluetooth Tray provides fast access Bluetooth Computer right-click the to many routine Bluetooth operations. Bluetooth icon, selects Services, and then selects Business Card Exchange from the From Betray you can: fly-out menu.
0 en Toe bb Tem been | Ea competent £7 g xed Blue Tooth Dongle User's Guide device name is present in the fly-out items to be transferred. menu, selecting that device will re-initialize the connection. Send to Bluetooth This feature is used to send information to another Bluetooth device.