User Guide

GUCE62
USB 2.0 BoostLinq Ethernet
- 164ft (TAA Compliant)
USB Extender via Ethernet Cable
The IOGEAR BoostLinq Ethernet allows placement of USB 2.0 (and USB 1.1) devices up to 164 feet away from your computer, while
still maintaining USB 2.0 Hi-Speed data transfer. The BoostLinq Ethernet converts the USB 2.0 connection to RJ-45 which allows the
signal to travel up to 164 feet over common Cat5, Cat5e or Cat 6 Ethernet cable. The peak data transfer speeds of USB 2.0 are
maintained by the incorporation of a unique signal booster chipset that preserves the integrity of your data. It also maintains the
voltage requirement to power downstream USB 2.0 devices such as webcams, hard drives, etc. These active repeaters ensure signal
integrity is preserved over the full length of the cable, resulting in maximum performance for all peripherals.
The kit includes a power supply and two dongles. The local dongle connects directly to your computer and the remote dongle
connects directly to your USB device. These two dongles are interconnected with Cat5, Cat5e, or Cat6 cabling (not included) to
extend the USB device any distance desired- up to 164 feet (50 meters). The GUCE62 is simple to set up and requires no additional
drivers to install.
Extend USB 2.0 device connection over Cat5, Cat5e or Cat6 cable
Access a single USB device from up to 164 feet away via Ethernet
connection
Extremely easy to install, no software program needed
Compact design, allows for easy placement
Fully compliant with USB 2.0 and 1.1 standards
Compatible with devices such as webcams, hard drives, printers,
scanners, smart boards, etc.
Includes power supply
TAA compliant