Bluetooth Wireless Stereo Solution User Manual (GBMA201, GBMH201, GBMHKIT)
Welcome Now you can experience the most comfortable way to listen to your favorite music – without wires! IOGEAR’s wireless Bluetooth stereo headphones incorporate Bluetooth technology to let you enjoy music or other audio up to 66 feet from the source, in beautifully crisp mp3-quality stereo sound. With 3 different models available, IOGEAR offers the solution that best fits your needs.
Table of Contents Package Contents ○ ○ System Requirements Introdution ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - Operation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - Pairing with Bluetooth-enable device ○ ○ Audio Playback: How it works Troubleshooting ○ Technical Support FCC Statement ○ Limited Warranty ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2 ○ ○ ○ ○ ○
Package Contents GBMH201 1– Bluetooth Stereo Headphone 1– Detachable Microphone 1– Carrying Bag 1– Power Adapter 1– Quick Start Guide 1– Warranty/Registration card GBMA201 1– Bluetooth Audio Transmitter 1– 3.5mm to RCA audio cable 1– 3.5mm to ¼” Stereo Phono Connector 1– 3.
System Requirements For stereo sound (headphones): Bluetooth-enabled music source must support Advanced Audio Distribution Profile (A2DP) For cell phone use: Bluetooth cell phone must support either Headset or Hands-Free Profile *Note: Functionality of the Back/Forward headphone buttons requires Bluetooth software with support for the Audio/Video Remote Control Profile (AVRCP).
Introduction Headphones 1. Center button – multiple functions include a) turn headset on/off; b) pause/play music; c) mute/un-mute sound d) accept/terminate phone call 2. Volume up button 3. Volume down button 4. Forward button* 5. Back button* 6. Bluetooth LED 7. Power LED 8. Microphone jack 9. Power jack 10.
Introduction Audio Transmitter : 1. ON/OFF button 2. Power jack 3. Status LED 4. 3.5mm audio connector 5. Removable rubber for iPod Mini users iPOD Mini Users To properly fit iPOD Mini, the connector on the audio transmitter is slideable, Simply remove the rubber located to the right side of the audio connector. You will then be able to slide the audio connector to the right for a perfect fit on the iPOD Mini.
Introduction Headset LEDs Blue LED · Solid when connected to a Bluetooth device · Blinks slowly when the power is on and it is waiting for a Bluetooth connection · Blinks rapidly when ringing (incoming call) Red LED · Solid when charging · Off when fully charged Audio Transmitter LEDs Blue LED · Blinks rapidly when Powered ON · Solid when connected · Blinks twice per second when searching for headphones Red LED · Solid when charging · Solid when charging · Off when finished charging 6
Operation - GBMH KIT HEADPHONES Charge Headphones 1. Before first use, you must fully charge the headphones for at least 2 hours. 2. Each full charge gives you approximately 6.5 hours of continuous operation. Turn ON Headphones 1. Press and hold the Center button for approximately 6 seconds 2. The Blue LED will quickly flash, indicating it’s ready to accept a Bluetooth connection Turn OFF Headphones 1.
Operation - GBMH KIT AUDIO TRANSMITTER Charge transmitter 1. Before first use, you must fully charge transmitter for at least 2 hours 2. Each full charge gives you approximately 6.5 hours of continuous operation Turn ON transmitter 1. Press and hold the ON/OFF button for 2 seconds 2. The blue LED will begin flashing rapidly, waiting for a Bluetooth connection Turn OFF transmitter 1.
Operation - GBMH KIT For GBMHKIT Only: The Bluetooth KIT (headphones and transmitter) should already come pre-paired from factory, and all you need to do is turn both of them ON.
Operation - GBMH KIT Step 1- Turn ON Bluetooth Headphones Press and hold the Center button for approximately six seconds until the blue LED starts flashing Step 2 -Turn ON Bluetooth transmitter Press and hold the ON/OFF button for approximately three seconds until the blue LED starts flashing Step 3 - Auto-connect Wait approximately 60 seconds as both devices search for each other and auto-connect.
Operation - GBMA201 GBMA201: Setting the transmitter in Inquiry Mode Follow the procedure below if: ·You purchased the headphones (GBMH201) and transmitter (GBMA201) separately (not part of a kit), or ·You have GBMHKIT, but are having trouble getting the headphones and transmitter paired, or ·You are using non-IOGEAR Bluetooth headphones with the transmitter (GBMA201). For a list of compatible Bluetooth headphones visit www.iogear.
Operation - GBMA201 Step 1 – Turn OFF Turn OFF both audio transmitter and headphones Step 2 – Inquiry Mode Press and hold the ON/OFF button on the transmitter for approximately 6 seconds to invoke inquiry mode. Step 3 – Turn ON Turn ON Bluetooth headphones by pressing the Center button for 6 seconds. If using non-IOGEAR headphones, consult your manual for instructions. Step 4 – Auto-Connect The transmitter will now begin searching for Bluetooth headphones within range and connect to the closest one.
Operation - GBMH201 HEADPHONES Charge Headphones 1. Before first use, you must fully charge the headphones for at least 2 hours. 2. Each full charge gives you approximately 6 hours of continuous operation. Turn ON Headphones 1. Press and hold the Center button for approximately six seconds 2. The Blue LED will quickly flash, indicating it’s ready to accept a Bluetooth connection Turn OFF Headphones 1.
Operation - GBMH201 The Bluetooth headphones can be used with any computer, PDA, phone, MP3 player, or any other type of device that supports the following Bluetooth profiles: · A2DP (Advanced Audio Distribution Profile) for stereo sound · AVRCP (Audio Video Remote Control Profile) for functionality of the Back/Forward buttons 14
Operation - GBMH201 Below is an example on how to pair and connect to the headphones using Widcomm Bluetooth software version 4.0.x. (PC version). Step 1 - Turn ON Bluetooth Headphones Press and hold the Center button for approximately 6 seconds until the blue LED starts flashing Step 2 – Open Bluetooth software Make sure Bluetooth function is enabled on your computer and open Bluetooth application (ex: My Bluetooth Places).
Operation - GBMH201 Step 4 – Pairing When the IOGEAR Headphones are found, right click on its icon and select Pair Device If prompted for a PIN code, enter “0000” (four zeroes) 16
Operation - GBMH201 Step 3 – Connect Once paired, right-click on its icon and select the option “Connect Audio Sink”. Wait while the computer/PDA connects to the Headphones.
Operation - GBMH201 Step 4 – Finished When connected, the headset icon will turn green as below. You may now exit the Bluetooth software. IOGEAR Headphones Simply launch your music/movie software application and enjoy! If you encounter problems, please consult the troubleshooting section of this manual.
Using With A Cell Phone Once paired with your Bluetooth cell phone, you can make/receive phone calls through the IOGEAR headphones (using the included detachable microphone). If you make/receive a phone call during music playback, pressing the Center button will pause the music and transfer audio to the cell phone, and automatically resume music at the end of your call.
Operation Phone Pairing Procedure Step 1 – Setup Phone Make sure your cell phone’s Bluetooth functionality is turned ON Step 2 – Turn ON Bluetooth headphones Press and hold the Center button for approximately 6 seconds until the blue LED starts flashing Step 2 – Search for Bluetooth headphones Follow your cell phone instructions to search for Bluetooth devices Step 3 – Pair and Connect Once the IOGEAR headset is found, select it and pair to it. If prompted for a PIN code, enter “0000” (four zeroes).
Operation Making a call Simply dial the number as usual from your cell phone; the voice will be directed to the headset During music/audio playback, pressing keys on your cell phone will automatically transfer control of the headphones to the cell phone, and music will be paused. Upon phone call termination, the music will resume after approximately 5 seconds.
Operation Making a call Simply dial the number as usual from your cell phone; the voice will be directed to the headset During music/audio playback, pressing keys on your cell phone will automatically transfer control of the headphones to the cell phone, and music will be paused. Upon phone call termination, the music will resume after approximately 5 seconds. Answering a call 1. You will hear a ring tone on the headset during an incoming call 2. Press the Center button once to pick up the incoming call.
How It Works Using Headphones with Bluetooth transmitter Simply follow the pairing procedure as indicated on the manual, and then plug in the audio transmitter to any of your devices. The music will transfer to the headset, as if you were using any standard headphones. Using Headphones with Bluetooth Computer Typically, after establishing the Bluetooth connection with the headphones, you will be able to listen to audio from your device without having to do any changes to your sound settings.
Operation If this is not the case, however, you may make this change manually by doing the following: 1. Go to Control Panel and then double-click on “Sounds and Audio Devices.” 2. This will open up the Sound Properties window 3. Select the Audio tab on top, and under the “Sound playback option”, make sure to select “Bluetooth High Quality Audio.” Now click Apply and then OK. 4. Now, the default device for audio playback will be the Bluetooth Headphones.
Operation *The Bluetooth transmitter only has the capability to send audio signals out. For functionality of the Back/Forward buttons, your Bluetooth-enabled device or software must support the AVRCP Bluetooth profile.
Troubleshooting 1. The headphone control buttons have stopped responding or behave strangely. This might be an indication that the batteries are low and need re-charging. Please allow the batteries to charge for approximately 2 hours. 2. I have followed the instructions but I do not hear any sound on the headphones. a) Make sure volume is not muted on your computer/PDA or other device.
Technical Support If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed to provide you with the latest technical information about our products. Most of the answers to your questions can be found here, so please try it out before contacting technical support. Technical Support is available Monday through Friday from 7:30 a.m. to 5:30 p.m.
FCC Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Contact Information: 23 Hubble • Irvine, CA 92618 • (P)949.453.8782 • (F)949.453.8785 • www.iogear.
