ATEN Technology, Inc., dba IOGEAR. ATEN Te c h n o l o g y , In c ., d b a IOGEAR. Ad d : 15365 B a r r a n c a Pk w y Ir v i n e , CA 92618, USA Co n t a c t : J o s e p h Z h a n g E- m a i l : j z h a n g @ i o g e a r .c o m Te l : 949- 453- 8782 Fa x : 949- 453- 8785 Pr o d u c t Sp e c i f i c a t i o n IEEE 802.
ATEN Technology, Inc., dba IOGEAR. CONTENTS 0 REVESION HISTORY.......................................................................................................................................3 1 INTRODUCTIONS.............................................................................................................................................4 2 1.1 OVERVEIW.......................................................................................................................................
ATEN Technology, Inc., dba IOGEAR. 0. Revision History Version NO Date Modifications Draft Rev0.1 Dec.19.2014 First Released Neal Yu Rev0.2 Mar.09.2015 Update the outline drawing and package information Neal Yu Rev0.3 Mar.21.
ATEN Technology, Inc., dba IOGEAR. 1. Introduction This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realteak RTL8811AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a ,150Mbps for IEEE 802.11n and 433.3Mbps for IEEE 802.
ATEN Technology, Inc., dba IOGEAR. 2. GENERAL SPECIFICATION 2.1 WiFi Specifications Features Main Chipset Operating Frequency Descriptions Realtek RTL8811AU 5G: 5.150GHz~5.825GHz Host Interface USB 2.0 WIFI Standard iEEE802.11a/n/ac Modulation PHY Data rates 802.11 n: BPSK , QPSK , 16QAM ,64QAM with OFDM 802.11a: QPSK , BPSK , 16QAM ,64QAM with OFDM 802.11ac: QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM 802.11a: 6,9,12,18,24,36,48,54Mbps 802.11n: up to 150Mbps 802.11ac: up to 433.3Mbps 802.
ATEN Technology, Inc., dba IOGEAR. ● -77dBm at MCS2 ● -74dBm at MCS3 ● -70dBm at MCS4 ● -66dBm at MCS5 ● -65dBm at MCS6 ● -64dBm at MCS7 802.11a@10% PER 6Mbps ≤-82±1dBm 9Mbps ≤-81±1dBm 12Mbps ≤-79±1dBm 18Mbps ≤-77±1dBm 24Mbps ≤-74±1dBm 36Mbps ≤-70±1dBm 48Mbps ≤-66±1dBm 54Mbps ≤-65±1dBm 802.
ATEN Technology, Inc., dba IOGEAR. 3. Mechanical Specification 3.
ATEN Technology, Inc., dba IOGEAR. 3.2 Connector Pin Definition Pin # Name Description 1 GND Ground 2 RF Antenna 3 GND Ground 4 PB WPS 5 GND Ground 6 DP USB+ 7 DM USB- 8 VDD 3.
ATEN Technology, Inc., dba IOGEAR. 3.3 Typical Application Circuit 4. Environmental Requirements 4.1 Operating& Storage Conditions Operating Storage MTBF (Mean Time Between Failures) Temperature: 0°C to +70°C Relative Humidity: 10-90% (non-condensing) Temperature: -40°C to +80°C (non-operating) Relative Humidity: 5-90% (non-condensing) Over 150,000hours 4.2 Recommended Reflow Profile Referred to IPC/JEDEC standard.
ATEN Technology, Inc., dba IOGEAR. 4.3 Patch WIFI modules installed before the notice: WIFI module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ℃ for the MID motherboard.
ATEN Technology, Inc., dba IOGEAR. 5. Package 5.1 Package information Tray size: L258.0*W205.0 mm Carton size: L310.0*W260.0*H220.
6. Notice 6.1 FCC notice FCCID:QLEG8811A Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.