Users Manual Part 1

2x2 UBR user manual using GUI Revision: A0-07
43
CONFIDENTIAL
11.1 System Configuration
The user can configure the basic aspects of the UBR, like its hostname, site name or the timezone. A basic
overview of the System Configuration screen is given below:
Figure 22: Basic overview of the system configuration screen
Follow the steps given below and configure the system settings for the UBR:
Table 16: List of actions to configure the system settings
Callout
Name
Description
1.
Configuration
Click on “Configuration” dropdown
2.
System Configuration
Click on “System Configuration” option
3.
Local Time
Displays the local date time of the device as per the
selected “Time Zone”. In case the user is not sure of
the time zone, the user can click on the “Sync with
browser” option and synchronize the date time with the
browser
4.
Hostname
Enter the “Hostname”. The same will be reflected in
the system summary of status overview screen
5.
Site Name
Enter the “Site name”. The same will be reflected in
the system summary of status overview screen
6.
Timezone
Select the respective “Timezone” from the dropdown
list. The date and time of the respective timezone will
be reflected in the system summary of status overview
screen
7.
Buzzer
Switch the “Buzzer” ON/OFF with this option. Buzzer
is used at the time of link alignment. Rapid buzzer
indicates correct alignment of UBR device in a link
and slow buzzer indicates the misalignment of UBR
device in a link
Note: Make sure to check the RSL in device GUI for final link alignment. The RSL is
based on the link budget.
8.
NTP Client
Click on the check box to enable the NTP client