Users Manual Part 1

2x2 UBR user manual using GUI Revision: A0-07
40
CONFIDENTIAL
10.2 Reboot
Reboot restarts the device with existing configuration. We can change the firmware when the device is
rebooted with different partitions. Based on the selected partition, the corresponding firmware will be
loaded into the device as working firmware
A basic overview of the Reboot screen is given below:
Figure 20: Basic overview of the reboot screen
Follow the steps given below and reboot the UBR:
Table 14: List of actions to reboot the UBR
Callout
Name
Description
1.
Maintenance
Click on “Maintenance” dropdown
2.
Reboot
Click on “Reboot” option
3.
Reboot to Current
partition
Click on “Reboot to Active Bank” option. Device will
boot from current partition, and the firmware version
present in the current partition will be in use
Or
4.
Reboot to Alternate
partition
Click on “Backup Bank” option. Device will boot from
alternate partition, and the firmware version present in
the alternate partition will be in use. The firmware
upgrade always happen on alternate partition. Use this
option and reboot to the latest uploaded firmware
version.