Users Manual Part 1

2x2 UBR user manual using GUI Revision: A0-07
32
CONFIDENTIAL
Follow the steps given below to view the system summary:
Table 7: List of information displayed in the system summary
Callout
Name
Description
1.
Status
Click on the “Status” dropdown in navigational toolbar
2.
Overview
Click on “Overview” option
3.
System summary
Click on “System summary” option
4.
Hostname
Displays the “Hostname” assigned to the respective
UBR in the “System Configuration” screen
5.
Mode
Displays the acting mode (Master or Slave) of the
respective UBR in the P2P or P2MP link. The same is
configured for the UBR in the “Link settings” section
6.
Link Type
Displays the role of the respective UBR in the link.
Either the device is participating in P2P link or P2MP
link. The same is configured in the “Link settings”
section
7.
Site Name
Displays the name of the site with which the respective
UBR is associated to. The site name is given in the
“System Configuration” screen
8.
Time
Displays the time details according to the time zone
allocated in the “System Configuration” screen
9.
Date
Displays the date details according to the time zone
allocated in the “System Configuration” screen
10.
Time Zone
Displays the selected time zone according to which the
date and time calculations are done for the respective
UBR. The same is configured in the “System
Configuration” screen
11.
System uptime
Displays the time duration since the respective UBR
board is up and successfully running without any
shutdown
12.
GPS Location
Displays the locked position of the GPS in coordinate
system. If the GPS status (13) is still in “searching”
state, no coordinates will be displayed.
13.
GPS Locked Satellites
Displays the number of satellites contributing for the
calculation of GPS location
14.
GPS Signal Strength
Displays the signal strength of GPS and is expressed in
dB
15.
IPv4 Address
Displays the assigned IPv4 address of the UBR
16.
IPv4 Gateway
Displays the assigned IPv4 gateway address of the
UBR
17.
IPv6 Address
Displays the IPv6 address, if assigned to the UBR or
displays “Not connected” if no IPv6 address is
assigned to the UBR
18.
IPv6 Default Gateway
Displays the IPv6 Default Gateway, if assigned to the
UBR or displays “Not connected” if no IPv6 Default
Gateway is assigned to the UBR
19.
Master MAC Address
Displays the MAC address of the master device
20.
Tx Power
Displays the power of wireless radio signal being
transmitted over the link