User guide Audioffice
User Guide Audioffice 2 Declaration of Conformity for the European Union Invoxia declares that the Audioffice product complies with the essential requirements and other relevant provisions of the European RTTE Directive 1999/5/EC on Radio and Telecommunication Terminal Equipment. You can read the Declaration of Conformity at the following address: www.invoxia.com/fr/support. U.S.
User Guide Audioffice 3 Table of contents • Important information 1 Discover your Audioffice dock • • Box content Your Audioffice dock 2 Set-up • • • Installing the handset Connect all your devices Bluetooth 3 Use • • • • • Ending a mobile call Receiving a mobile call Receiving and ending a voip app call Adjusting the volume Activating and desactivating the speakers 4 Technical Data • • • • Mfi program Connectivity Technical Specifications Buttons 5 Warranty • • • • • • Warranty pe
User Guide Audioffice Important information Safety Guidelines Required Power Supply This dock is powered through a mains AC 100-240V supply. Warning • • • • • • • Do not open the base, handset or charger. Please ensure that no liquid comes into contact with the product. Do not expose the device to excessive smoke, dust, mechanical vibration or shock. Only use the cables, adapters and batteries supplied. Place the unit near an accessible electrical outlet.
User Guide Audioffice 5 1 Discover your Audioffice dock Box content Audioffice base AC adapter Handset Lightening, 30 pin and micro-USB adapters Smart holder Lightening, 30 pin and micro-USB cables Tablet stand Lightening, 30 pin and micro-USB cable adapters Your Audioffice dock Adjust volume. Receive and End a call. Bluetooth pairing.
User Guide Audioffice 2 Set up 1. The Audioffice base is protected by a transparent film. Please remove it. 2. Insert the cable suitable to your smartphone into the matching cable adapter. 3. Place it then in the special pocket of the receptacle.
User Guide Audioffice 4. Slide the cord into place through the interstices under the base. 5. Plug the USB connector to the left USB port at the rear of the device. 6. Insert the suitable adapter to your smartphone, or none if you use a case and your device doesn’t fit. To connect a different model, please repeat steps 2 to 6. 7. Install the tablet holder if needed.
User Guide Audioffice 8 8. Plug the mains power adapter into the back of the base and into a wall mount socket. Installing the handset 1. Plug the cord of the handset into the right USB port at the back of the base. Slide the cord into place through the interstices under the base. 2. Place the Smart Holder and the handset on the top of the base.
User Guide Audioffice 9 3. Press the On / Off button at the back of the base. Connect all your devices The 3.5 mm jack is an audio input for all your devices with an audio output. The USB slave port is to connect your computer (USB cable not included). Bluetooth Bluetooth 1st connection With iOS 6, be sure your Bluetooth is actived first. Dock or connect via USB your iPhone/iPod/iPad.
User Guide Audioffice 10 Multiple connections: Pairing a new device / Reconnect a device With iOS 6, be sure your Bluetooth is actived first. For any devices, long push the volume button until you hear a sound signal. A «Pairing mode: Audioffice is waiting for connection» message allows you to pair your Audioffice in your device Bluetooth menu. A final sound confirms the pairing. Connecting a previously paired device is easy from its Bluetooth menu. The last connected device is the controlling device.
User Guide Audioffice 11 3 Use You can now receive and place calls through your mobile line or any Voice over IP app. You can also benefit from your conferences and all your music with a great acoustic sound quality. Ending a mobile call There are several ways to end a mobile call: 1. By pressing the End button on your iPhone. 2. By replacing the handset on the base. 3. In speaker mode, by pressing the volume button. Receiving a mobile call There are several ways to receive a mobile call: 1.
User Guide Audioffice 12 4 Technical Data Mfi program Made for iPod, Made for iPhone, Made for iPad Compatible 4th and 3rd generation iPod Touch, iPhone 5, 4S, 4, 3GS, new iPad, iPad 2 and iPad Connection through 30 pin connector or Bluetooth Universal support for 4th and 3rd generation iPod Touch, iPhone 4S/4, 3GS et 3G Connectivity Bluetooth 2.1 1 USB slave port 1 USB port 1 jack 3.
User Guide Audioffice 13 5 Warranty This warranty relates to the AudiOffice dock and not its accessories (power adapter, handset cable). Warranty Period This dock, when new, comes with a 12-month warranty. The Warranty Period starts on the date of purchase of the AudiOffice dock. The Warranty will be honored on presentation of the original bill or receipt, provided the date of purchase and the unit type are indicated.