User's Manual

ManualsBrandsINVONS ManualsAudio Equipment2.4G wireless headphone

User Manual

2.4G Wireless Headphone

Model:h-RF801, 8081706

一、Operation Instruction

1.Insert the Power adaptor into the 100-240V AC socket，Then use the 3.5mm plug of power

adaptor connect with the DC5V outlet hole on transmitter, if the power light get blue ,

indicating the transmitter link with power correctly , at the same time the transmitter also has

the function of charge. If Switch turn off ，Audio light will not work。See bellowing

Picture-1、2 ：

Picture-1 Picture-2

2.Connect one end of the audio cable with 3.5mm to the audio output socket of the hi-fi audio

equipment（such as TV,DVD,MP3/MP4,PC or Mobile）,Connect the other end of the cable to the

audio-in on transmitter . The audio light turn blue if your hi-fi equipment begin to input the signal of audio to

transmitter at the same time you should put the button to Switch power on, and audio light is on the red standby if

after around 5 minutes without audio signal input, Audio light blue and transmitter open when audio signal

input 。See bellowing picture 3、4：

2.3

孔

DC 5V

Power Light

Audio Light

Power ON/OFF

Summary of content (7 pages)

PAGE 1
User Manual 2.4G Wireless Headphone Model:h-RF801, 8081706 一、Operation Instruction 1.Insert the Power adaptor into the 100-240V AC socket，Then use the 3.5mm plug of power adaptor connect with the DC5V outlet hole on transmitter, if the power light get blue , indicating the transmitter link with power correctly , at the same time the transmitter also has the function of charge.
PAGE 2
Power ON/OFF Audio indicator light 3.5mm audio input Picture-3 Picture-4 3.Turn on the power button of receiver(headphone built-in 800mAh rechargeable Li-ion battery) , and the receiver can receive the signal of audio from transmitter(if the powering transmitter cradle work well) while the right indicating light turn blue , if receiver don’t receive any signal, the light turn red.
PAGE 3
4.In the case of normal listening to the music，We can remove the 3.5mm audio cable ,and plug in optical fibers, Optical fibers another head is connected with any audio source you want，Start playing music you love，At this time if again with 3.5 audio cable, Automatically switch to 3.5 audio source，if need optical fiber play music，just remove the 3.5 audio source。 If you would like to use as a wired headphone is available，just put the headphone plug in 3.5 audio cable，another head connect with 3.
PAGE 4
5.．According to your different requirement to adjust the voice volume ( press the VOL+ or VOL-), , just as following pictures: 。See Picture-8： VOL+ SCAN connection VOL- Picture-8 6..As the Li-battery power low 2.
PAGE 5
二．Matters need attentions: 1．Avoid exposure and high temperature，humid environment。 2．Long time not to use headphone，receiver should charge once 3 to 6 month， it is better to protect battery life。 3. Receiver to the right of audio jack is used as a wired headphone。With a 3.5mm audio cable head connect with TV,DVD、MP3/MP4、PC、mobile etc，the another head of 3.5mm audio line connect with receiver on the right side of Audio jack can be used as a wired headphone。Without shutdown used a 3.
PAGE 6
so as not to damage your hearing。 7.May will weaken your listen to the outside world when use the headphone， Please do not impact on your personal security as possible under the condition of using this product。 Accessories： 3.5 mm adaptor cable 3.
PAGE 7
Frequency Range：2406-2472 MHz Channel Number：GFSK Modulation Type：31 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.