Product Card

LITHIUM
BATTERIES
INVI
C
T
A
SPB Sydney Oce: 1/1 Forge St, Blacktown, NSW 2148, Australia
SPB Melbourne Oce: 2/9 Compark Circuit, Mulgrave, Melbourne, VIC, 3170, Australia
SPB National Head Oce: 1 Ant Road, Yatala, Brisbane, QLD 4207, Australia
T 1300 001 772 F [phone]
E [e-mail] W spb.net.au
SNL12V9S SPECIFICATION SHEET
About Invicta Lithium
The Invicta Lithium 12V range has been specifically designed for
replacement of similar size Lead acid batteries. The family is
comprised of the popular sizes found in the lead acid range but with
the added benefits of Lithium Iron Phosphate (LiFePO4) technology
and is ideally suited to deep cycle longer run time applications.
Nominal Voltage 12.8v
Nominal Capacity (25
0
C, 0.33C) 9Ah
Terminal F2
Length (mm) 151 ± 2mm
Width (mm) 65 ± 2mm
Height (mm) 95 ± 2mm
Weight 1.2kg
Max Charge Voltage 14.6 ± 0.1V
Standby 13.8 ± 0.1V
Low Voltage Cut O 10V
Max. Discharge Current (30 mins) 9A
Max. Pulse Discharge Current (3 Sec) 35A
Max. Charge Current 9A
Recommended Current Charge < 5A
Cycle Life (100% DoD) > 2000
Operating Temp - Charge 0 - 50
0
C
Operating Temp - Discharge -20 - 55
0
C
Short Circuit Release Load Release
Max. Series / Parallel Configuration 4P
Terminal F2
Features & Benefits
• Large number of cycles >2000 (100% DoD)
Up to 8 times cycle life of SLA lowering your total cost of
ownership
• Safe and stable chemistry & Integrated BMS
The use of LiFePO4 along with the integrated BMS ensures
protection against over charge / discharge, temperature and
short circuit providing the highest degree of safety
• Greater capacity utilisation – 60% more than SLA
Gives longer runtime than equivalent SLA
• High energy density (less than half of the weight of SLA)
Lowering total weight of application
• Fast recharge
Battery is charged and ready to be used sooner
• Flat Discharge Curve
Longer run time & more ecient use of capacity
• Extremely low self-discharge rate
Can sit unused for longer periods of time
• UL1642 at cell level