Pharos Traveler 137 user manual
Copyright © 2009 Pharos All Rights Reserved. No part of this manual, including the product and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without prior written permission from Pharos. Pharos provides this publication “as is” without warranty of any kind. This information could include technical inaccuracies or typographical errors. Pharos may make improvements and/ or changes in the product.
This is only the beginning. We are constantly enhancing and improving our user experience. For the latest information on what we’ve added and how it works, visit us online: http://www.pharosgps.
Important Precautions Please read the following information carefully before you start using the Pharos Traveler 137 to avoid any damage caused by improper usage: • The device is not charged when you take it out of the box. The battery should be charged for at least 8 hours before first use. Do not remove the battery while charging. • Do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technician or provider.
• Do not clean the screen with chemical detergents. Only use cloths specifically designed for cleaning liquid-crystal displays. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. • Do not expose the device to prolonged direct sunlight, or leave the device in a humid environment for extended periods of time, as this may cause damage to the device and battery.
Table of Contents Chapter 1 | Overview 1.1 Introduction 1.2 Introduction cont 1.3 Installing SIM Card, Battery and Micro SD Card 1.4 Battery Information 9 10 12 13 17 Chapter 2 | Basic Operations 2.1 Getting Started 2.2 Today Screen Components 2.3 Start Menu 2.4 Programs, Settings and Icons 2.5 Input Methods 19 20 21 22 23 26 Chapter 3 | Synchronizing Information 3.1 Installing and Setting up ActiveSync 3.2 Installing and Setting up WMDC 3.3 Synchronizing Information 3.
Chapter 4 | Phone 4.1 Making a call 4.2 Configuring the Phone 4.3 Voice Call In-Call Options 4.4 Video Call In-Call Options 35 Chapter 5 | Contacts & Messaging 5.1 Using Contacts 5.2 Text Messaging 5.3 Multimedia Messaging Service 5.4 E-mail 5.5 Using SIM Manager 45 Chapter 6 | Basic Applications 6.1 Using Calendar 6.2 Using Notes 6.3 Using Tasks 56 Chapter 7 | Connecting to the Internet 7.
Chapter 8 | Transferring Files To and From the device 8.1 Using ActiveSync 8.2 Transferring from Memory Cards 8.3 Using Bluetooth 73 74 75 75 Chapter 9 | Other Applications 9.1 Windows Live Messenger 9.2 JETCET PDF5 9.3 Windows Media Player 9.4 MIDlet Manager 9.5 Profile Manager 9.6 GPS 9.7 Internet Sharing Chapter 10 | Camera 10.1 Overview 10.2 Taking a picture 10.3 Taking a video 10.4 Settings and Options 10.5 Pictures and Videos 78 79 81 82 84 84 85 87 Appendix 93 A.
Chapter 1 | Overview
1.1 Introduction Hardware Overview 1 Mini-USB cable & headphone connector. 2 Power. Press to turn on the device. 3 Reset. With the stylus, press to soft reset the device. Be sure to switch the device into sleep mode before resetting the device; otherwise, unsaved data or settings may be lost. 4 Stylus. 5 Forward facing camera. Use this camera for video calling. 6 Telephone receiver. Speaker for listening to phone calls. 7 Indication LED. Indicates battery, GPS and Bluetooth status.
4 3 2 6 7 5 18 19 15 16 20 8 1 17 9 10 12 11 13 14 11
1.2 Introduction cont.
1.3 Installing SIM Card, Battery and Micro SD Card Installing the SIM Card and Battery If you want to use the telephone features of the device, you must install a valid SIM card. Push either of the protrusions on the left or right side of the device upwards and lift the back cover.
Lift the battery up in the direction as shown. (To lift the battery easier, at the seam between the upper-right corner of the battery and its compartment, use your finger or fingernails to pry up the battery.) Slide the SIM card into the SIM card slot with its gold contacts facing down.
Align the gold contacts of the battery with the corresponding conductors on the device, then gently push the battery into place. 1 2 Press the back cover down as shown until it clicks into place. NOTE: The device is supplied with a rechargeable Li-ion polymer battery. This battery is supplied completely discharged and should be charged for at least 8 hours before first use. Please follow the normal turn-off procedure to remove the battery; otherwise unsaved data may be lost.
Installing a MicroSD Card Use a certified MicroSD card in this slot to expand the device’s storage memory (SDHC supported). To install the MicroSD card, do the following: 1. Remove the back cover. 2. With the device facing down, insert the media card into the slot logo side up. To remove the MicroSD card, slide it out from the card slot. NOTE: Inserting the MicroSD card in the wrong direction by force can cause damage to the card and the card slot.
1.4 Battery Information Battery performance depends on many factors, including your wireless service provider’s network configuration, signal strength, the temperature of the environment in which you operate your phone, the features and settings you select and use, items attached to your phone’s connecting ports, and your voice, data, and other program usage patterns.
Checking the Battery Power Select Start > Settings > System tab > Power. Optimizing Power Performance Select Start > Settings > System tab > Power > Advanced and then adjust settings. Managing a Low Battery When the low-battery warning appears, do the following: 1. Turn off Bluetooth and/or WiFi if they are currently enabled. 2. Immediately save your current data. 3. Plug in or turn off the device. 4. Close applications no longer in use. Charging the Battery 1.
Chapter 2 | Basic Operations
2.1 Getting Started Turning the Device On/Off a) When the device is off: press the Power button to turn on the device. b) When the device is turned on: press the Power button to switch the device into sleep mode. You can still receive phone calls and messages when the device is in sleep mode. c) When the device is in sleep mode: press the Power button to wake up the device.
2.2 Today Screen Components The Today screen is usually the first screen that appears when you turn on the device for the first time each day. It displays a summary of relevant information, shows you the system status and contains a list of shortcuts to programs. The items in the example screen are defined as follows: 1 Date and time.Owner information. 2 Wireless status. 3 Tap here to show quick reminders about how to do basic tasks. 4 Owner information.
Notification Icons Notification icons appear at the title bar on the screen. The following table lists common status indicators and their meanings.
2.4 Programs, Settings and Icons Programs Games Two games are installed on the device: Bubble Breaker and Solitaire. ActiveSync Synchronize information between the device and a PC or Exchange Server. Calculator Perform basic calculations such as addition, subtraction, multiplication and division. Camera Take pictures and videos. File Explorer Organize and manage the files and folders on the device. FM Radio Lets you listen to FM radio stations on the device.
Task Manager Manage currently running programs. Tasks Create, edit and synchronize tasks. Windows Live Access Windows Live services including Hotmail, Instant Messenger, and Spaces. Windows Media Play music and video. Settings Personal Buttons Configure button actions. Input Configure input methods. Lock Set a password to unlock the device. Menus Configure the Start menu. Owner Information Enter and edit owner information. Phone Configure the Phone features.
Encryption Encrypt files as they are placed on a storage card. Error Reporting Enable or disables the built-in error reporting system. External GPS Lets you define the ports used for GPS configuration. Factory Reset Reset all settings to the manufacturer defaults. G-Sensor Enable the screen to rotate by tilting the device. Managed Programs List programs that have been installed remotely by your system administrator. Memory Check available device memory and memory card information.
USB to PC Enable advanced network functionality. Wi-Fi Configure wireless networks and network adapters. Wi-Fi Network Display detailed information for a connected Wi-Fi Network. Wireless Manager Turn on/off wireless, Bluetooth and phone features. 2.5 Input Methods The device contains 4 text input methods: Keyboard, Letter Recognizer, Block Recognizer and Transcriber. Keyboard Letter/Block Recognizer Transcriber Keyboard 1.
Letter Recognizer Letter Recognizer recognizes one letter, number or symbol at a time. • To launch Letter Recognizer, select the input method selector arrow (the upward arrow next to the input method icon) and select Letter Recognizer. • Write uppercase letters in the left recognition area (the ABC box). • Write lowercase letters in the middle recognition area (the abc box). • Write numbers and symbols in the right recognition area (the 123 box).
Transcriber Transcriber recognizes handwriting in cursive and/or print. It uses the full screen as its recognition area. It interprets the movement of the stylus on the screen as you write. • To launch Transcriber, select the input method selector arrow (the up arrow next to the input method icon) and select Transcriber. • Write anywhere on the screen. NOTE: The Transcriber comes with detailed help pages. Select 28 if you need further assistance.
Chapter 3 | Synchronizing Information
ActiveSync and Windows Mobile Device Center (WMDC) synchronize information on the device with information on your PC or Exchange server. ActiveSync works on computers that have the Windows XP operating systems while WMDC works on computers that have Windows Vista. Specifically, you can use ActiveSync or WMDC to: • Synchronize Outlook e-mail, contacts, calendar or tasks on your phone with your PC. • Synchronize pictures, video, and music between the device and your PC.
3.2 Installing and Setting up WMDC The Windows Vista operating system includes the basic WMDC application partially installed, you can fully install WMDC on your computer from the Getting Started Disc. 1. Follow the instruction on the Windows Mobile™ Getting Started Disc to install WMDC on your PC. 2. Connect the device to your PC, WMDC will start automatically. 3. Do either of the following on the home screen of WMDC: • Click Set up your device to select items that want to synchronize.
• Select the checkbox for the items you want to synchronize. If you cannot select • • • • a checkbox, you might have to clear the checkbox for the same information type elsewhere in the list. Clear the checkbox for any items you want to exclude. To customize synchronization of a computer, select the computer name and then click Settings. To customize synchronization of particular information, select the information type and then click Settings.
3.5 Synchronizing with Exchange Server To set up the device to synchronize directly with Exchange Server, you will need to get the name of the server and the server domain name from your service provider or system administrator. You must also know your Exchange user name and password. 1. On the device screen, select Start > Programs > ActiveSync and then select set up your device to sync with it. 2. Enter your Email address and then tap Next. 3.
3.6 Synchronizing via Bluetooth Connecting to a PC Using Bluetooth 1. Your PC must be equipped with a suitable Bluetooth radio. 2. Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your PC to support ActiveSync. 3. On the device, select Start > Programs > ActiveSync. 4. Select Menu > Connect via Bluetooth. Ensure that the device and PC are within close range. 5.
Chapter 4 | Phone
4.1 Making a call The Phone Screen From the phone screen, you can see dial records and Contacts and choose to make a video or voice call. To access the Phone Screen, do any of the following: • Press the SEND hardware button. • Select Phone on the Today screen. • Select Start > Phone.
Making a Call by Using the Phone Keypad 1. On the Phone screen, select Keypad if the keypad is not displayed. 2. Enter the number to dial using the keypad. 3. Select matching contacts that come up in the smart dial area to dial that number and/or contact or finish entering the number and select to make a voice call or to make a video call. Making a Call from Call History 1. On the Phone screen, select to display call history full screen. 2. Scroll to the desired number or contact.
To create a speed dial entry for a contact 1. Select Contacts on the Today screen. 2. Select the contact for whom to create a speed dial. 3. Scroll to the phone number (if there is more than one) for which to create a speed dial. 4. Select Menu > Add to Speed Dial. 5. In Location, select the speed dial number to use. 6. Select OK when finished. NOTE: The first speed dial location is generally reserved for your voice mail. Speed Dial uses the next available location by default.
4.2 Configuring the Phone Your wireless service provider may provide useful services such as Call Barring, Caller ID, Call Forwarding, Call Waiting, Voice Mail and Text Messages and Fixed Dialing. You can view and edit these settings from the Network. Please make sure you have inserted a valid SIM card to the device before changing the following settings.
2. Do one of the following: • Move the slider to the desired volume level. Select On, Vibrate, or Off to quickly change both the ringer and system volume settings. Blocking Incoming or Outgoing Calls 1. Select Start > Settings > Phone > Services tab. 2. Select Call Barring > Get Settings. 3. Choose the calls you want to block, and select OK. • Block incoming calls: All calls, When roaming, Off. • Block outgoing calls: All calls, International, International except to home country, Off.
4.3 Voice Call In-Call Options The device provides various options for managing multiple calls at the same time. You are notified when you have another incoming call, and you have the choice of ignoring or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. Mute/Unmute Speaker On/Off Note End Call Hold Contacts Answering a Second Call 1.
Conference Call 1. Either put a call on hold and dial a second number or accept a second incoming call when you have one in progress. (To dial a second number, tap on the screen to put the first phone on hold, then tap or Keypad to dial a second number). 2. Select Menu > Conference. 3. To end the second call and return to the first call, select on the screen or press END. NOTE: If the conference connection is successful, the word “conference” will appear at the top of the screen.
4.4 Video Call In-Call Options IMPORTANT: Not all service provider support video calling, please contact your service provider for details. When in a video call, you can see yourself and the person you are talking to showing on the screen at the same time. During the call, you can choose to turn off the camera or switch between the forward facing camera and the main camera.
• Switch Window To switch the size of preview window and remote window, select on the screen. • Brightness Select on the screen to adjust the brightness; there are four levels for brightness. • Night Mode. During a call, select Menu > Night Mode On/Off to switch between night mode and normal mode. • Hands-free. If you use a Bluetooth headset, select Menu > Turn Hands-free On/Off to switch between speaker and headset.
Chapter 5 | Contacts & Messaging
5.1 Using Contacts In Contacts, you can store phone numbers, e-mail addresses, home addresses and any other information that relates to a contact (such as a birthday or an anniversary date). You can also add a picture or assign a specific ring tone to a contact. You can quickly communicate with people using the contact list. Click a contact in the list for a summary of contact information and available communication methods.
Viewing and Editing Contact Information 1. Select Start > Contacts or select Contacts on the Today screen. 2. Select the contact whose information you want to view. 3. To edit the information, select Menu > Edit. 4. Do any of the following: • Select Picture and select a picture you want to add. This can be an existing picture, or you can take a new picture using the camera program. • Select Ring Tone and select the ring tone you want to use for this contact.
5.2 Text Messaging Creating a Text Message 1. Select Start > Messaging > Text Messages. 2. Select Menu > New. 3. Enter the recipient’s text message number in the To field. Insert a semicolon (;) between multiple text message numbers. 4. Enter your message and select Send. Depending on phone signal, text messages will be sent immediately. NOTE: You can quickly enter text message numbers from your contact cards. In the To field, tap To and select a recipient from the list.
5.3 Multimedia Messaging Service Creating and sending Multimedia Message Service (MMS) messages to your friends and family is fun and easy. You can include text as well as existing or newly captured photos, video clips or audio before sending your MMS. MMS messages can be broken up into various slides, where each of the slides can be any combination of audio or video clip, an image and/or text. Composing a MMS Message 1. Select Start > Messaging > MMS. 2. Select Menu > New. 3.
Previewing a MMS Message You can preview an MMS message before sending it. 1. To preview your MMS message after composing it but before sending it, select Menu > Preview. 2. Select Done or Replay to dismiss or repeat the preview. Reading a MMS Message 1. Select Start > Messaging. 2. Make sure the folder drop-down list says Inbox . If it doesn’t, select the folder drop-down list and select Inbox under MMS. 3. In the message list, select the MMS message you want to read.
5.4 E-mail Setting up an E-mail Account Before you set up your Internet e-mail account, please ensure that you have the necessary information from your e-mail service provider. The kind of information you’ll need to have ready is tabulated below. Use this as a check-list before proceeding with the account set-up. Setting Description User name Usually the first part of your e-mail address, which appears before the “at” sign (@).
Password Your password for the outgoing e-mail server. Domain The domain name of the outgoing e-mail server. Require SSL connection (Outgoing mail server only) A connection that enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you will not be able to send e-mail. Now you are ready to set up your account: 1. Select Start > Messaging > Setup E-mail. 2. Enter your e-mail address and password.
Composing an E-mail Message 1. Select Start > Messaging. 2. Select an e-mail account to use. 3. Select Menu > New. This will bring up a new e-mail form. 4. Enter recipient e-mail addresses in the To, Cc and/or Bcc fields as necessary. Insert a semicolon (;) between multiple addresses. 5. In the Subject field, type in a subject. 6. Enter a message. 7. Select Send.
5.5 Using SIM Manager The SIM Manager allows you to manage the phonebook in your SIM card. Using the SIM Manager, you can easily transfer phonebook entries from your SIM card to Contacts. Adding a Phonebook Entry to the SIM Card Please note that SIM card contacts can store far less information than Outlook contacts. There is a restriction on the length of the contact name, you can only have one number per contact. 1. Select Start > Programs > SIM Manager. 2.
Saving Contacts to SIM Card When saving Contacts to the SIM card, one SIM card entry can only store one phone number. If a contact has more than one phone number (e.g. Work tel. and Mobile tel.), SIM Manager will create different entries for these phone nubmers and mark these entries with phone nubmer type abbreviations (e.g. WT and MT). 1. Select Start > Programs > SIM Manager. 2. Select Menu > Setting. Select the phone number type that you want to copy.
Chapter 6 | Basic Applications
6.1 Using Calendar Use the Calendar application to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between the device and PC. You can also set Calendar to remind you of appointments with an audible alarm or flashing light. You can look at your appointments in several different views (Day, Week, Month, Year and Agenda).
Changing Calendar Views You can look at your appointments in Agenda, Day, Week, Month or Year view. To see detailed appointment information in any view, select the appointment. To see a list of available actions for an appointment, select and hold the appointment. 1. Select Start > Calendar. 2. Select Menu > View, then select the view you want. You can view your calendar in the following layouts: • Today’s agenda: your current day’s activities at a glance.
6.2 Using Notes The Notes program helps you to quickly capture thoughts, questions, reminders, to-do lists and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability and send notes to others. Your notes and recordings are displayed in the note list. If you have a long list, select the sort list (labeled Name by default) and select the option you want. To open a note or play a recording, select it.
Creating a Stand-alone Voice Recording 1. Select Start > Programs > Notes. 2. If the recording toolbar is not shown, select Menu > View Recording Toolbar. 3. Select the RECORD button on the recording toolbar and speak into the microphone to start a voice recording. 4. Select the STOP button on the recording toolbar when finished. The recording will appear in the notes list, and you can review it by selecting it. 5. Select OK to return to the notes list.
6.3 Using Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them by using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. If you use Outlook on your PC, you can synchronize tasks between the device and PC so that tasks you create or update on your PC will also be updated on the device and vice versa.
Deleting a Task 1. Select Start > Programs > Tasks. 2. Select the task, select Menu > Delete. Changing a Task 1. Select Start > Programs > Tasks. 2. Select an existing task and select Edit. 3. When finished making changes, select OK. Sorting/Filtering Your Tasks 1. Select Start > Programs > Tasks. 2. Do one of the following: • To sort the tasks, select Menu > Sort by, then select a sorting option (e.g. Status or Due Date).
Chapter 7 | Connecting to the Internet
7.1 Setting up Internet connections The device’s powerful networking capabilities allow you to access the Internet or your corporate network at work through telephony or wireless connections. Specifically, you can configure the device to establish a connection via GPRS/EDGE/HSPA, Dial-up and Wi-Fi, or set up a VPN or network Proxy. With an active connection on the device, you can browse the Web, download e-mails or use Windows Live Messenger.
5. In Access point name, enter the access point name and then select Next. Access point name will be provided by your carrier. 6. In User name, enter your user name for the GPRS network, if required. 7. In Password, enter a password, if required. This information is also provided by your network operator. 8. If required, select Advanced and enter information related to Servers and TCP/IP. 9. Select Finish.
5. Enter the phone number provided by your service provider, select Next. 6. Enter the user name and password, tap Finish. Creating a Proxy Connection Proxy connection lets you access the Internet through an intermediary IP address. You should gather all of the relevant information or network settings you need before starting this process. 1. Select Start > Settings > Connections tab > Connections. 2. Select Set up my proxy server. 3. Check the checkbox in front of This network connects to the Internet. 4.
7.2 Using a Wi-Fi Connection Wi-Fi is wireless radio technology that allows you to access e-mail, the internet and broadband multimedia content. When the device encounters a hot-spot (a place where you can access Wi-Fi networks), it can then connect to that network wirelessly. While some hotspots are free, the most robust public Wi-Fi networks are provided by private internet service providers (ISPs) or wireless carriers, and using these networks will typically require payment of a connection fee.
Checking the Wi-Fi Connection You can check the current wireless connection status after connecting to a Wi-Fi Network. 1. Select Start > Settings > Connections tab > WiFi Network. 2. Information such as the SSID (the Wi-Fi network name) and the wireless network signal strength will be shown in a summary screen. 3. Select other tabs to check IP information, change power saving settings or review other advanced settings. 4. Select OK.
Editing a Wireless Network 1. Open Wireless Manager and then select Menu > Wi-Fi Settings. 2. In Wireless tab, you can see currently available wireless networks. Select and hold the network you want to edit, then select Edit on the pop-up menu. 3. Change the settings of this wireless network as required. 4. Select Finish to save your settings. 7.
Enabling and Disabling a Wireless Feature The Wireless Manager allows you to turn connections on and off quickly and easily. 1. Wi-Fi: turn wifi on and off. 2. Bluetooth: turn Bluetooth on and off. 3. Phone: turn the phone on and off. 7.4 Using Internet Explorer Mobile Internet Explorer Mobile is a full-featured Web browser, optimized for use on your phone.
Deleting a Favorite 1. Select Start > Internet Explorer. 2. Select Favorites. 3. Select a favorite and then select Menu > Delete. 4. Select Yes to confirm the deletion. Changing the Size of Text on Web Pages 1. Select Start > Internet Explorer. 2. Select Menu > View > Text Size, then select the size you want. Showing or Hiding Pictures on Web Pages 1. Select Start > Internet Explorer. 2. Select Menu >Tools > Options > Other > select Show Pictures. Images on the Web pages that you visit will be downloaded.
Send a Link by E-mail 1. Select Start > Internet Explorer. 2. Go to the page you want to send. 3. Select Menu > Tools > Send Link. 4. The Messaging accounts list will appear. Select an account. 5. A new message will be created with the page address inserted in the message body. Choose a recipient, enter any accompanying message and then select Send. Clearing History, Cookies, or Temporary Files From time to time you might want to clear up space on the device and wipe Internet Explorer’s browser history. 1.
Chapter 8 | Transferring Files to and From the Device
You might need to transfer application data such as Word documents, Excel spreadsheets, PowerPoint slides and/or media files from your PC to the device and vice versa. This section describes different methods for transferring files to and from the device. 8.1 Using ActiveSync NOTE: To transfer files from PC to the device with ActiveSync, Windows XP users must first install Microsoft ActiveSync on the PC first.
8.2 Transferring from Memory Cards 1. Insert your memory card into the device’s MicroSD card slot. (See “1.3 Installing SIM card, Battery and MicroSD card” for details.) 2. Select Start > Programs > File Explorer. 3. In the Show list, select Storage Card. 4. File Explorer should display all the files stored in your memory card. Select and hold the file or folder you want to transfer and then select Copy from the pop-up menu. 5.
3. Select the device with which you want to create a Bluetooth partnership, then select Next. If the device you are looking for does not appear in the list, ensure that it is in range and that it has been made discoverable, then select Refresh. 4. In Passcode, enter an alphanumeric passcode between 1 and 16 characters, then select Next. Otherwise, leave the passcode blank. For security reasons, it is strongly recommended that you use a passcode. 5.
Beaming an Item Once you create a partnership, the two partnered Bluetooth-enabled devices don't need to be discoverable to communicate. In Calendar, Contacts, Notes, Tasks and Pictures, you can beam files and information to other devices using Bluetooth. 1. Turn on Bluetooth. Select Start > Settings > Connections tab > Bluetooth > Mode tab. Select the Turn on Bluetooth checkbox. 2. Select an item you want to beam. For example, open a task in Tasks. 3. Select Menu > Beam. 4.
Chapter 9 | Other Applications
9.1 Windows Live Messenger You can send instant messages over the Internet with Windows Live Messenger. NOTE: The device must be connected to the Internet before you can start using Windows Live Messenger. To connect to the Internet, refer to “Chapter 7. Connecting to the Internet” for details. You must have a valid Microsoft .NET Passport or Hotmail account before you can sign in to Windows Live Messenger. Signing In To Windows Live Messenger 1. Select Start > Programs > Messenger. 2.
Adding/Deleting a Windows Live Messenger Contact 1. Sign in to Windows Live Messenger. 2. Do any of the following: • To add a contact, select Menu > Add New Contact, then follow the on-screen instructions. • To delete a contact, select and hold the contact name in the Windows Live contact list, select View contact’s info > Menu > Delete Contact. Sending an Instant Message 1. Sign into Windows Live Messenger. 2. Select the contact’s name, then select Send IM. 3. Enter a message, select Send. 4.
9.2 JETCET PDF5 Opening a PDF File To open a file in JETCET PDF5, select the PDF file in File Explorer, or do the following: 1. Select Start > Programs > JETCET PDF5. 2. Select the file that you want to view. 3. If you want to open a file on the network, tap to select the location and enter the server address. Viewing the Document After opening a file with JETCET PDF5, you can choose to view the file in full screen or zoom in/out the file. • Select Menu > View > Full screen.
9.3 Windows Media Player The device comes with Windows Media Player pre-loaded, which allows you to play digital audio and video files stored locally or on a network. Transferring Music and Videos to the device If you want to store the media files to a storage card, insert a MicroSD card on the device before connecting the device to a PC. 1. On your computer, open Windows Media. 2. Connect the device to your computer using a USB cable. 3. In Windows Media Player on your computer, click Sync. 4.
Playing Media Files on the device 1. Select Menu > Library to open the Library screen. 2. Select a category (e.g. My Music > All Music). 3. Select an item, then select Play. 4. You can then use the following functions when playing audio or video files: : Display the video in full screen. : Launches a Web site where you can find music and videos to play. : Skip to the beginning of the current file or to the previous file. : Pause/Play. : Skip to the next file. : Decrease the volume level.
9.4 MIDlet Manager A MIDlet is a Java program which can be downloaded from the Internet Explorer Mobile and work on the device. You can use MIDlet Manager to handle all Java files on the device, including download, installation, upgrade and deletion of MIDlets. Installing a MIDlet 1. Select Start > Program > Java. 2. Select Actions > Install, select whether to install the MIDlet from local storage or a website.
Editing a Profile 1. Select Start > Programs > Profile Manager. 2. Select a profile and then select Menu > Edit. 3. Rename the profile if needed. 4. Select an event from the drop-down list (incoming call, reminder and message), then change the device’s reactions for this event from other drop-down lists. 5. Select OK to apply the changes. Restoring a Profile 1. Select Start > Programs > Phone Profile. 2. Select Menu > Reset all to default. 3. Select OK.
Receiving Better Satellite Signals GPS positioning is limited by bad weather (e.g. rainy or cloudy days) and usage location (e.g. tall buildings, tunnels, underpasses, trees, bridges…etc). Typically, GPS does not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content. It can take several minutes the first time you establish a GPS connection.
9.7 Internet Sharing With Internet Sharing, you can connect your PC or notebook to the Internet by using the device’s networking capability. NOTE: Please remember to install a valid SIM card and establish a GPRS or dial-up connection before using Internet Sharing. In order to use a USB cable connection, you have to install ActiveSync or WMDC on your PC (refer to chapter three). Please disable ActiveSync or WMDC before launching Internet Sharing. Setting up the Device as a USB Modem 1.
Chapter 10 | Camera
10.1 Overview The built-in Camera application allows you to use the camera /microphone to capture videos and images. Your camera has the following features: Single image capture Time controlled capture Video capture Quality, size and file format options Special effects and image properties Advanced options including anti-flicker, storage location, rest counter, white balance, flash light, review duration, shutter sound, anti-vibration and geo-tagging.
10.3 Taking a video 1. Press and hold the camera button to launch the camera application. 2. If the camera is in still capture mode, press the capture mode icon on the top left. 3. Position the device so that the image you want to capture is displayed on the screen. 4. Press the camera button to start recording. 5. Press the camera button to stop recording. 10.4 Settings and Options To access settings, press . Press to switch between menu pages.
Quality High, Low, Normal GPS Turn on or turn off the GPS function. After GPS is connected, coordinate data will be added to photos you take. (To view GPS coordinates embedded in a photo, open the photo on your PC, right-click on the photo to see its information.) GPS on Other / GPS is connecting / GPS off My Documents/Storage Card: select where you want to save your files. Reset Counter: reset the file naming counter back to 1.
Appendix
A.1 Specifications System Information Processor Qualcomm 7201A, 528MHz Operating System Windows Mobile 6.1 Professional Memory 256 MB RAM 512 MB ROM Dimensions and Weight Dimensions 117 x 61 x 13 mm (4.61*2.4*0.51 inches) Weight 140g (4.
Cellular connectivity Band GSM/GPRS/EDGE 850/900/1800/1900 MHz UMTS/HSDPA/HSUPA 1700/1900/2100 MHz UMTS up to 384k/384k Upload/Download HSDPA/HSUPA up to 7.2Mbps download/2Mbps upload System Class 10 GPRS/EDGE service Antenna Embedded (2G/3G all band, Wi-Fi, GPS, Bluetooth) Connectivity and Interface Bluetooth 2.1 compliant + EDR USB USB 2.0 Full Speed, mini USB Wi-Fi 802.
A.2 Regulatory Notices Regulatory Agency IDs For regulatory identification purposes, your product is assigned a model number of Traveler 137. To ensure continued reliable and safe operation of the device, use only the accessories listed below with your Traveler 137. The Battery Pack has been assigned a model number of Traveler 137. This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
・ETSI EN 301 489-7 Electromagnetic compatibility and Radio spectrum matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS). ・ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.
or TV reception. This can be determined by turning the equipment on and off. The user is encouraged to try to correct the interference by one or more of the following measures: ・Reorient or relocate the receiving antenna. ・Increase the separation between the equipment and receiver. ・Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ・Consult the dealer or an experienced radio or television technician for help.
Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S.
The WEEE logo ( ) on the product and its accessories or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste.
A.3 PC Requirement to Run ActiveSync 4.5 To connect the device to a Windows PC running any Windows operating system prior to Windows Vista*, you must have Microsoft® ActiveSync® program installed on your PC. ActiveSync 4.
