User Manual IRIS I nventec I ris 1/ 2 User Manual ROM Version 061130 1 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Copyright © 2006 I nventec Corp. All Rights Reserved. No part of this manual, including the product and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without prior written permission from I nventec Corp. I nventec Corp. provides this publication “as is” without warranty of any kind.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 for cleaning liquid displays, to wipe the device screen. z Do not expose the device to direct sunlight, or leave the device in a humid environment, for extended periods of time, as this may cause damage to the device and battery. z Do not immerse the device in water. z The device may interfere with the navigation and/ or communication systems on aircraft. The use of the device on aircraft is prohibited by laws in most countries.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 This product should be operated in the suggested normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. with FCC RF exposure guidelines. Use of other enhancements may not ensure compliance I f you do no t use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Table of Contents Copyright © 2006 I nventec Corp. All Rights Reserved. ..... 2 I MPORTANT SAFETY I NFORMATI ON .................................. 2 Trademark I nformation ...................................................... 5 Chapter 1. Know ing Your Device ...................................... 11 1.1 I ntroduction.............................................................................................12 View s of the Device ......................
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 2.4 The Start Menu .......................................................................................27 List of All Programs ..............................................................................28 2.5 Settings .....................................................................................................29 Personal ....................................................................................................29 Connections........
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Receiving/ Rejecting a Call ................................................................62 3.3 I n-Call options ........................................................................................63 Conference Call ......................................................................................64 Call w aiting..............................................................................................65 Turning On/ Off the Speakerphone ....
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Creating a GPRS Connection .............................................................90 Creating a Proxy Connection ............................................................93 Deleting a Connection .........................................................................93 7.2 Using I nternet Explorer Mobile ........................................................94 Brow sing the I nternet ............................................................
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 10.1 Word Mobile ........................................................................................106 Creating a Document .........................................................................106 Word Mobile Formatting Toolbar ..................................................106 10.2 Excel Mobile ........................................................................................107 Creating a New Spreadsheet ...............................
User Manual IRIS Chapter 1. Know ing Your Device 11 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 1.
User Manual IRIS 10 Soft key 1 版 本 : 1.3 日 期 : 95/ 03/ 10 Performs the command shown in the label above the button 11 Start key Pull down the Start menu 12 Send key(Talk key) Press this key to dial or answer a call 13 5-way navigation key Press this button up, down, left, or right to move through menus; carry out the selection by pressing the centre button.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Hardw are Keyboard Other than the on-screen keyboard, this device is equipped with a QWERTY keyboard. Please slide the main screen to the right to reveal it. (Need one more picture) To enter capital letters/ numbers, or to delete/ back by using the hardware keyboard: The “Fn” key is used to access the symbols in orange on the keypad. Press this key once and the icon appears; the next character you enter will be a incorrect symbol or number.
User Manual IRIS Blue Blink 版 本 : 1.3 日 期 : 95/ 03/ 10 Off Green and blue blink alternately while both Bluetooth and Wi-Fi are on. GSM/ Battery LED lets you know that you have unanswered calls or tells you about the device’s GSM/ battery status: Color Missed Call/ GSM on GSM on Charging Low Pow er ( battery full) ( battery low ) Red Blink Off Blink Off Orange Off Off Off Constantly on Green Off Blink Off Off 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 F Stylus Write, draw, or make selection on the touch screen G User Manual/ Quick Guide Provide instructions of device functions H Getting Started CD Windows MobileTM Getting Started Disc I Battery Rechargeable Li-ion polymer battery 1.3 I nstall SI M card and Battery I nstalling the SI M Card I f you want to use phone features, you must install a GSM SI M card. z Push the back cover down and slide it open.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 The device contains a rechargeable Li-ion polymer battery completely discharged and should be charged for at least 8 hours before f irst use. Use only manufacturer-specif ied original batteries. Damages caused by using batteries not specif ied by manufacturer are not covered under warranty. Please follow normal power off procedure to remove the battery or reboot the device, otherwise unsaved data may be lost. 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Optimizing the Pow er Performance z Tap > Settings > System tab > Pow er > Advanced, and adjust the time for turning off the device if it is not in use. Managing a Low Battery When the low-battery warning appears, do the following: 1. I mmediately save your current data.
User Manual IRIS 2. 版 本 : 1.3 日 期 : 95/ 03/ 10 Start charging the battery or turn off your phone. Charging the Battery 1. To charge the battery, place the battery into the battery slot correctly. See previous section for how to install the battery. 2. Do one of the following: z Connect the device with the AC adapter and plug the AC adapter into a power outlet. z Connect the device to a PC with the USB cable.
User Manual IRIS Chapter 2. Basic Operations 20 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 2.1 Getting Started Pow ering On/ Off the Device Press the POWER button to turn on the device. The POWER button is located on the top side of the device. When you power on the device for the f irst time, you are asked to calibrate the device. Please refer to the “Calibrating your device” section in this chapter for calibration steps. Press the POWER button again to switch the device to sleep mode.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Locking/ Unlocking the Device Locking the device turns off keyboard functionality. This is a helpful feature if, for example, the device is turned on and in your pocket, and you want to prevent accidental key presses. z To lock the device, tap on the icon on the Today Screen. Once the device is locked, the left soft key label changes to Unlock .
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 You can still receive calls and make emergency calls when the keypad is locked. To unlock the device, tap the Unlock button on the Today screen first, a screen as below will show. Press the “Fn” key and * to unlock the device, or just tap the Unlock button on the screen. 2.2 I nput Methods The device contains 4 different input methods: Keyboard, Letter Recognizer, Block Recognizer, and Transcriber.
User Manual IRIS z 版 本 : 1.3 日 期 : 95/ 03/ 10 Tap the CAP key on the on-screen keyboard to enter capital letters and/ or symbols. Letter Recognizer Letter Recognizer recognizes one letter, number, or symbol at a time. z To launch Letter Recognizer, tap the input method selector arrow (the upward arrow next to the input method icon) and select Letter Recognizer . z Write uppercase letters in the left recognition area (the ABC box).
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Tap ? in Letter or Block Recognizer to see a demo on how to write recognizable characters. Transcriber Transcriber recognizes handwritings in cursive and/ or print. I t uses the full screen as its recognition area. I t interprets the movement of the stylus on the screen as you write. z To launch Transcriber, tap the input method selector arrow (the upward arrow next to the input method icon) and select Transcriber. z Write anywhere on the screen.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Tap here to rotate the screen Tap here to trigger the Wireless Manager 1 Date and time 2 Wireless status (GSM, Wi-Fi, and Bluetooth) 3 Owner information 4 Unread messages including text messages, MMS messages, and e-mails 5 Active tasks 6 Upcoming appointments 7 Device lock status 8 Sign in to Pocket MSN You can also access the Today screen by selecting Today from the Start menu.
User Manual IRIS 版 本 : 1.
User Manual IRIS 1 Commonly used items 2 Recently accessed applications 3 List of all programs, device settings, and system help 版 本 : 1.3 日 期 : 95/ 03/ 10 List of All Programs The following table lists icons of the programs that are already installed on your device. ActiveSync Synchronizes information between your device and a PC. See “Chapter 4. Synchronizing I nformation” for details.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 PC) Word Mobile See “10.1 Word Mobile” for details. 2.5 Settings Personal Buttons Conf igure the device’s buttons. I nput I nput method conf igurations. Lock Set a password to unlock the device. Menus Conf igure the Start menu. MSN Options Conf igure MSN services. Ow ner Enter information about the owner of the device. I nformation Phone Conf igure the Phone features. See “Chapter 3 Phone Features” for details.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 DeviceI nfo Display the device software and hardware version. Error Reporting Enable or disable Microsoft product error reporting. Factory Reset Lets you reset all settings to manufacturer default. Memory Memory and process management. Pow er Power management settings. Regional Conf igure the device’s locale. Settings Remove Remove an install application. Programs Screen Lets you align the screen.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 To see detailed appointment information in any view, tap the appointment. For information about changing the Calendar view, see Change views in Calendar. Scheduling an Appointment > Calendar or tap the appointment reminder on the Today Screen. 1. Either tap 2. Tap Menu > New Appointment . 3. Enter information about the appointment. 4. To schedule an all-day event, under All Day, select Yes.
User Manual IRIS 5. 版 本 : 1.3 日 期 : 95/ 03/ 10 Select categories and attendees. Categories: Business, Holiday, Personal, Seasonal Add attendees to the meeting. 6. Tap . All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar. Deleting an Appointment > Calendar . 1. Tap 2. I n Agenda view, select the appointment to delete. 3. Tap Menu > Delete Appointment .
User Manual IRIS 4. 版 本 : 1.3 日 期 : 95/ 03/ 10 I f the appointment is recurring, tap Yes to delete the series, or tap No to delete only the current occurrence.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 When you delete an appointment in Calendar on your phone, it is also deleted on your PC the next time you synchronize. I f the appointment has not been synchronized with a PC, it will be deleted only form the phone. Calendar items can be deleted only from Agenda view or from an open calendar appointment. To delete from other views, open the appointment, and Tap Menu > Delete .
User Manual IRIS > Calendar . 1. Tap 2. Tap Menu > View and select the view you want. View See Screen Agenda Your current day's activities at a glance. Upcoming appointments are bold; past appointments are dimmed. Day Your schedule for a single day in a day-planner layout. Free and busy times in time slots of 1/ 2 hour or 1 hour. 35 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS Week Your schedule for the whole week. Month Your free and booked days for a month: : Current day : morning appointment : afternoon appointment : morning and afternoon appointments : all-day event with time not marked free 36 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS Year 版 本 : 1.3 日 期 : 95/ 03/ 10 A calendar for the entire year. I n Month view, a date will appear in red when the Holiday category is assigned to any appointment for that day. You can also change the view by tapping Agenda, Day, Week, Month, or Year on the menu bar. To quickly see your appointments for the current day, tap Start > Today. Changing the Display of the Work Week > Calendar . 1. Tap 2.
User Manual IRIS z Tap 本 : 1.3 日 期 : 95/ 03/ 10 To specify the number of days you want to appear in a week, in Week view , tap 5-day w eek , 6-day w eek , or 7-day w eek . 3. 版 .
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 2.7 Using Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. Your notes and recordings are displayed in the note list. I f you have a long list, tap the sort list (labeled Name by default), and select the option you want.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Press the Voice Record button on the left side to launch Notes. (incorrect picture) 2. Tap New and enter text. 3. Tap to save your note. Creating a Stand-alone Voice Recording > Programs > Notes. 1. Tap 2. I f the recording toolbar is not shown, tap Menu > View Recording Toolbar . 3. Tap the RECORD button on the recording toolbar and speak to the device’s microphone to record your voice in the notes list. 4. Tap the STOP button 5.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Sw itching betw een Typing/ Writing Modes > Programs > Notes. 1. Tap 2. Create a new note or open an existing note from the notes list. 3. Tap Menu > Draw to switch to a different mode.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 While in w riting mode, tap Draw to sw itch to typing mode Editing a Handw ritten Note z Undo I nk/ Redo Tap Undo I nk to cancel or reverse an action. Re-execute an undone action by tapping Redo.
User Manual IRIS z Select All/ Clear Tap Select All to select all handwriting Tap Clear to clear selected handwriting Adding a Voice Recording to a Note > Programs > Notes. 1. Tap 2. Create a new note or open an existing note from the notes list. 43 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 3. 版 本 : 1.3 日 期 : 95/ 03/ 10 I f the recording toolbar is not shown, tap Menu > View Recording Toolbar . Stop Record Play 4. Tap the RECORD button on the recording toolbar and speak to the device’s microphone. 5. Tap the STOP 6. Tap button on the recording toolbar when f inished. to return to the notes list if you are adding a voice recording to a note.
User Manual IRIS Add a voice recording to a note in w riting mode Deleting a Note > Programs > Notes. 1. Tap 2. Tap and hold the note and tap Delete . 45 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 3. Tap the Yes button to delete the selected note. Creating a Default Template > Programs > Notes. 1. Tap 2. Tap Menu > Options. 3. Select a template from Default template. 46 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS Template Screen Blank 47 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS Meeting Notes Memo 48 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Phone Memo To Do 2.8 Using Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them by using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 I f you use Outlook on your PC, you can synchronize tasks between your device and PC so that tasks you create or update on your PC will also be updated on your device and vice versa. To quickly see the number of active tasks you have, tap Start > Today. Creating a Task > Programs > Tasks. 1. Tap 2. Do one of the following: z I n the Tap here to add a new task box enter the task name and press ENTER key.
User Manual IRIS 2. Select a completion status. 3. Pick the start and due time. 51 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 4. 版 本 : 1.3 日 期 : 95/ 03/ 10 Set a reminder date/ time and pick a task category. Set reminder date and time.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Multi-selection 5. Select task sensitivity. You can synchronize information on your phone with your PC to keep your task list up to date in both locations. I f you create a new task with a reminder on your PC and then synchronize tasks with your phone, the reminder will play at the time it was set on your PC.
User Manual IRIS Deleting a Task > Programs > Tasks. 1. Tap 2. Select the task, and tap Menu > Delete Task . Changing Task Priority > Programs > Tasks. 1. Tap 2. Select the task, and tap Edit . 3. I n the Priority box, select a priority. 54 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Sorting/ Filtering Your Tasks > Programs > Tasks. 1. Tap 2. Do one of the following: z To sort the tasks, tap Menu > Sort by and select a sorting option. z To f ilter the tasks by category, tap Menu > Filter and select a category to display. Setting Tasks Options > Programs > Tasks. 1. Tap 2.
User Manual IRIS View ing Task Details > Programs > Tasks. 1. Tap 2. Tap twice on a task to view the details. 56 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS Charter 3. Phone Features 57 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 3.1 Using the Phone You can use your phone to make, receive, and keep track of calls, and send text messages (SMS, Short Message Service) and MMS (Multimedia Messaging Service) messages. You can also dial a phone number directly from Contacts, and easily copy SI M contacts to Contacts on the phone. The Phone Screen From the Phone screen, you can open, call, or find a contact, and even save a new number in Contacts.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 To adjust the earpiece volume during a call, press the VOLUME control on the phone side panel. Adjusting the volume at any other time can affect the ring and notif ication and MP3 sound levels. 3.2 Making a Call Making a Call by Entering a Phone Number 1. On the Phone screen, begin entering the phone number. 2. Do one of the following: z I f you see the number or contact name to call, select it, then tap [ Talk ] or press the TALK (?) key.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Making a Call from Call History Call History displays calls you have made, received, and missed. 1. On the Phone screen, tap the Call History button on the Phone keypad. Call History 2. Select the name or phone number to call. 3. Tap Call or press the TALK key. 1. Calls you received 2. Calls you made 3. Calls you missed Making a Call from Contacts 1. On the Phone screen, tap Contacts. 2.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 contact’s number. Speed dials can be created only for numbers that are stored in Contacts. To create a speed dial entry for a contact 1. On the Phone screen, tap Contacts. 2. Tap the contact for whom to create a speed dial. 3. Select the phone number for which to create a speed dial. 4. Tap Menu > Add to Speed Dial. 5. I n Location , select the speed dial number to use.
User Manual IRIS 6. Tap 版 本 : 1.3 日 期 : 95/ 03/ 10 when f inished. Tap the Speed Dial button on the phone screen to check the success of creating a Speed Dial entry. The first speed dial location is generally reserved for your voicemail. Speed Dial uses the next available location by default. I f you want to place a number in a location that is already used, the new number replaces the existing number.
User Manual IRIS 3. Choose the calls you want to block, and tap 版 本 : 1.3 日 期 : 95/ 03/ 10 . z Block incoming calls: All calls, When roaming, Off. z Block outgoing calls: All calls, I nternational, I nternational except to home country, Off. 3.3 I n-Call options Your phone provides various options for managing multiple calls at the same time.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 notified when you have another incoming call, and you have the choice of ignoring or accepting the call. I f you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. I n-Call Options Conference Call 1. Either put a call on hold and dial a second number; or accept a second incoming call when you have one in progress.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Tap Menu and select Conference . 2. I f the conference connection is successful, the word “Conference” will appear at the top of the screen. To add additional persons to your conference call, tap Hold, enter the phone number, and then tap Sw ap to return and continue. Not all service providers support conference calling. Contact your service provider for details.
User Manual IRIS 2. Select Notify me or Do not notify me , and tap 版 本 : 1.3 日 期 : 95/ 03/ 10 . To answer another call 1. Click Answ er to take the second call and put the first call on hold. 2. To end the second call and return to the first call, press END ( To switch between calls 66 INVENTEC CORPORATION 英業達股份有限公司 ??).
User Manual IRIS z 版 本 : 1.3 日 期 : 95/ 03/ 10 To switch between two calls, click Sw ap. Turning On/ Off the Speakerphone Talk hands-free or let others hear your conversation with the built-in speakerphone in your device. z Tap Speaker On during a call to turn the speaker on. z Tap Speaker Off to turn the speaker off. To avoid damage to your hearing, do not hold your phone against your ear when the Speakerphone is turned on.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Adding a Phonebook Entry to SI M Card > Programs > SI M Manager . 1. Tap 2. Tap Option > Add Entry and enter the name and phone number you want to add. 3. Tap the OK button. Deleting Phonebook Entries from SI M Card > Programs > SI M Manager . 1. Tap 2. Select the entries you want to delete by checking the checkboxes in front. 3. Tap Option > Delete Selected. Saving Phonebook Entries to Contacts > Programs > SI M Manager . 1. Tap 2.
User Manual IRIS (Delete ?) 69 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Chapter 4.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 ActiveSync synchronizes information on your phone with information on your PC such as Outlook content. ActiveSync can also synchronize over a wireless or cellular network with Exchange Server, if your company or service provider is running Exchange Server with Exchange ActiveSync.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 4.2 Synchronizing I nformation To synchronize using ActiveSync, you must install ActiveSync on your PC before connecting your device to the PC. Starting and Stopping Synchronization Manually 1. Turn on the device. 2. Connect your device to your PC using a serial cable, USB cable, Bluetooth, or infrared connection. For more detailed information, see "Connecting a mobile device to a PC" in ActiveSync Help on your PC. > Programs > ActiveSync. 3.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Outlook e-mail can be synchronized with only one computer. 4.3 Changing Settings for an I nformation Type Before changing settings for an information type on the device, disconnect it from your PC. > Programs > ActiveSync > Menu > Options. 1. Tap 2. Select one of the information types. 3. Do one of the following: z To view or change settings for an information type (when available), tap Settings.
User Manual IRIS 5. 版 本 : 1.3 日 期 : 95/ 03/ 10 Select the check boxes for the types of information items that you want to synchronize with Exchange Server. 6. To change available synchronization settings, select the type of information, and tap Settings. 7. To change the rules for resolving synchronization conflicts, tap Advanced. 8. Tap Finish. You can also use the Sync Setup Wizard to set up the phone to synchronize remotely with the Exchange Server.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Chapter 5.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 5.1 Overview of Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 metres without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within range.
User Manual IRIS 2. 版 本 : 1.3 日 期 : 95/ 03/ 10 Check or uncheck the checkbox in front of Turn on Bluetooth to turn on or off Bluetooth. Making Your Device Visible To receive beamed information, beaming devices or computers must be able to detect your device. 1. Tap > Settings > Connections tab > Bluetooth .
User Manual IRIS 2. Select Make this device visible to other devices, and tap 版 本 : 1.3 日 期 : 95/ 03/ 10 . Other Bluetooth-enabled devices can now detect your phone and attempt to beam information to it, establish a Bluetooth partnership, or use a Bluetooth service. Selecting Visible also turns on Bluetooth. Turning off Bluetooth will make your device not visible, and it will also prevent you from sending a Bluetooth beam. 5.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Creating a Bluetooth Partnership > Settings > Connections tab> Bluetooth > Devices tab. 1. Tap 2. Tap Add new device . Your device searches for other Bluetooth-enabled devices and displays them in the list. 3. Select the device with which you want to create a Bluetooth partnership, and tap Next . Tap the Refresh button if the device you want to connect is not listed.
User Manual IRIS 4. 版 本 : 1.3 日 期 : 95/ 03/ 10 I n Passcode , if you want to use a passcode (recommended for enhanced security), enter an alphanumeric passcode between 1 and 16 characters, and tap Next . Otherwise, leave the passcode blank. 5. Enter the same passcode on the other device. 6. Select the service to use from the device, and tap Finish .
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Once you create a partnership, the Bluetooth-enabled devices don't need to be visible to beam information between them; Bluetooth needs only to be turned on. 5.3 Beaming I nformation ( Bluetooth) Receiving Beamed I nformation > Settings > Connections tab > Beam . 1. Tap 2. Select Receive all incoming beams.
User Manual IRIS 3. 版 本 : 1.3 日 期 : 95/ 03/ 10 To receive beams by using Bluetooth, ensure Bluetooth is turned on and that your phone is discoverable and within close range. 4. Tap . Once you select Receive incoming beams, your phone automatically receives beams until you clear this check box. Your phone can receive all types of beamed files, but you may not be able to view all types of files on the phone. You may need to copy some files to a PC for viewing.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 When using Bluetooth, if the device that you want to beam to doesn't appear in the list, ensure that the device is turned on, visible, and within close range of your phone. Also, ensure that Bluetooth is turned on.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Chapter 6.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 You may need to transfer application data such as Word documents, Excel spreadsheets, PowerPoint slides, and/ or media f iles from your PC to your device. This section describes different methods to transfer f iles from a PC to your device. 6.1 Using ActiveSync To transfer f iles from PC to your device with ActiveSync, you must install Microsoft ActiveSync on the PC f irst.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 6.2 Transferring from Memory Cards 1. I nsert your memory card into the device’s mini-SD card slot. (See “1.5 Mini-SD cards” for details.) > Programs > File Explorer . 2. Tap 3. I n the Show list, select Storage Card.
User Manual IRIS 4. 版 本 : 1.3 日 期 : 95/ 03/ 10 File Explore should display all the f iles stored in your memory card. Tap and hold the f ile you want to transfer, and select Copy. 5. From the Show list in File Explorer, go to destination folder. (For example, My Device > My Documents.) 6. Tap Menu > Edit > Paste . 6.3 Using Bluetooth Before receiving files, you must turn Bluetooth on and establish a Bluetooth partnership between your PC and your device. (See “Chapter 5.
User Manual IRIS 6.4 Transferring to a PC or Other Devices Please refer to Section 5.3 “Beaming I nformation (Bluetooth)” for details. 88 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Chapter 7.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 7.1 Setting up I nternet connections Your device’s powerful networking capabilities allow you to access the I nternet or your corporate network at work through wireless and conventional connections. Specifically, you can configure your device to establish a connection via GPRS or Proxy. With an active connection on your device, you can browse the Web, download e-mails, or use MSN Messenger.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 2. Tap Add a new modem connection. 3. Enter the following information (you may or may not need to enter all of the following information), and tap Finish . z Enter a name for the connection. z I n Select a modem , select Cellular Line ( GPRS) . z I n Access point name , enter the access point name.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 z I n User name , enter your user name for the GPRS network, if required. z I n Passw ord, enter your password, if required. z Tap Advanced > Servers tab. I n DNS, enter the primary Domain Name System (DNS) address, if required. z I n Alt DNS, enter the secondary DNS address, if required. z Tap TCP/ I P tab. I n Use specific I P address, enter the I nternet Protocol (I P) address for the device, if required.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Creating a Proxy Connection Every network connection is different. You should gather all of the relevant information or network settings you need before starting this process. > Settings > Connections tab > Connections. 1. Tap 2. Tap Edit my proxy server . 3. Check the checkbox in front of This netw ork connects to the I nternet . 4. Check the checkbox in front of This netw ork uses a proxy server to connect to the I nternet . 5.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 The device can not connect to a PC through ActiveSync while connecting to the I nternet using GPRS. 7.2 Using I nternet Explorer Mobile I nternet Explorer Mobile is a full-featured Web browser, optimized for use on your phone. You can use I nternet Explorer Mobile to browse the I nternet once you have set up your I nternet connection (if you haven’t done so, please read the previous chapter before continuing). Brow sing the I nternet 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Adding a Web Page to the Favorite List > I nternet Explorer . 1. Tap 2. To go to the page you want to add, tap Menu > Add to Favorites. 3. Conf irm or change the name and Web page address. 4. I n Create in, select a folder for this favorite. 5. Tap Add. A quick way to add favorites to your phone is to synchronize with your PC using ActiveSync. For more information, see ActiveSync Help on your PC. Deleting a Favorite > I nternet Explorer . 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Changing the Size of Text on Web Pages > I nternet Explorer . 1. Tap 2. Tap Menu > Zoom and select the size you want. There are f ive zoom options you can select: Largest / Larger / Medium / Smaller / Smallest. Show ing or Hiding Pictures on Web Pages > I nternet Explorer . 1. Tap 2. Tap Menu > View > Show Pictures. A check mark next to Show Pictures indicates that pictures will be displayed.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 To exit full screen mode, press either SOFT KEY, and then tap Menu > View > Full Screen to cancel the selection. 7.3 Using Wi-Fi Connection Wi-Fi is an enabling technology that allows you to quickly access e-mail, the internet, and broadband multimedia content. When your device encounters a hotspot (a place where you can access Wi-Fi networks), it can then connect to that network wirelessly.
User Manual IRIS Chapter 8. Messaging & Contacts 98 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Messaging is the unif ied point of access for all message types within your device. With Messaging, you can send and receive text messages, e-mails, and MMS messages. Contacts helps you to manage your contact information. Using Contacts you can quickly communicate with people. This section describes the procedure on sending and receiving different kinds of messages, and using Contacts to manage addresses and phone numbers. 8.
User Manual IRIS 3. 版 本 : 1.3 日 期 : 95/ 03/ 10 I n the message list, tap the text message you want to read. Changing Message Options > Messaging, and select Text Messages account. 1. Tap 2. Tap New . 3. Tap Menu > Message Options. 4. Select this check box to request a message delivery notif ication. 5. Tap . 8.2 E-mail Setting Up an I nternet E-mail Account Manually Before you set up your I nternet e-mail account, please ensure that you have the necessary information.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 settings settings than your incoming e-mail server. Use different user A check box that lets you enter separate settings for your outgoing name for outgoing e-mail server. server User name Your user name for the outgoing e-mail server. Password Your password for the outgoing e-mail server. Domain The domain name of the outgoing e-mail server.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 5. I n Subject , enter a subject. 6. Enter a message. 7. Tap Send. E-mail messages are stored in Outbox and are sent to recipients the next time you synchronize or connect to your e-mail server and send and receive mail. You can quickly enter e-mail addresses from your contact cards. I n To, press ENTER and select a recipient from the list. Then, select the recipient’s e-mail address. Reading an E-mail Message > Messaging. 1. Tap 2.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 summary of contact information. From there, you can call or send a message. I f you use Outlook on your PC, you can synchronize contacts between your phone and PC. Creating a New Contact > Contacts > New . 1. Tap 2. Enter information for the new contact. 3. Tap . I f someone who isn't in your list of contacts calls you or sends you a message, you can create a contact from Call History or from the message by tapping Menu > Save to Contacts.
User Manual IRIS 3. Tap Menu > Edit . 4. Tap Ring tone and select the ring tone you want. 5. Tap 版 本 : 1.3 日 期 : 95/ 03/ 10 . Finding a Contact > Contacts. 1. Tap 2. Begin entering the name or phone number of the contact until the contact is displayed. Sending an E-mail to a Contact > Contacts. 1. Tap 2. Tap the contact you want to send an e-mail to. 3. Tap the e-mail address. 4. Select the e-mail account to use. 5. Enter a subject, compose your message, and then tap Send.
User Manual IRIS Chapter 10. Other Applications 105 INVENTEC CORPORATION 英業達股份有限公司 版 本 : 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Your device comes with a variety of useful companion applications. This chapter describes the procedure on how to utilize these applications. 10.1 Word Mobile With Word Mobile, you can create and edit Microsoft Word documents and templates, plain text f iles, and/ or rich text format f iles. Unlike Microsoft Word, you can only have one document open at a time in Word Mobile. Creating a Document 1.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 Align text to the left Center the text Align text to the right Add or remove a numbered list in the selected text Add or remove bullets in the selected text I ncrease the indent of numbered or bulleted list text one tab stop to the right Decrease the indent of numbered or bulleted list text one tab stop to the left 10.2 Excel Mobile With Excel Mobile, you can create and view spreadsheet on you device.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 A check mark appears next to Toolbar when the toolbar is visible. Tap To Create a chart from the selected cells Align text to the left Center the selected text Align text to the right Add all contiguous numbers in a column or row $ Add a currency symbol Add the default thousands separator Add a decimal point I ncrease and decrease the magnification 10.3 Pow erPoint Mobile With PowerPoint Mobile, you can view PowerPoint slides on you device.
User Manual IRIS 版 本 : 1.3 日 期 : 95/ 03/ 10 z Tap ▲ ∣ > Previous to go back to the previous slide. z To jump to any slide in the slide show, tap ▲ ∣ > Go to Slide and tap on the slide you want to view. 10.4 Pocket MSN Messenger You can send instant messages with MSN Messenger. Your device must be connected to the I nternet before you can start using MSN Messenger. Signing I n/ Out MSN Messenger With MSN Messenger, you can send and receive instant messages from other MSN Messenger users.
User Manual IRIS z 版 本 : 1.3 日 期 : 95/ 03/ 10 To delete a contact, tap and hold the contact name in the MSN contact list, then tap Delete Contact . Sending an I nstant Message 1. Sign in MSN Messenger. 2. Tap the contact’s name to whom you want to send a message to. 3. Enter a message and tap Send. To add a preset message, tap Menu > My Text and select a preset message. Changing MSN Messenger Display Name 1. Sign in MSN Messenger. 2. Tap Menu > Options > Messenger tab. 3.