CD-920Cloud Dictionary User Manual
Layout BESTA CD-920 Cloud Dictionary Screen LED Speaker (right) Speaker (left) Micro SD Slot USB Jack Microphone ON/OFF Key RESET Keyboard 1 Earphone Jack
Power Source & Charger 1 Micro SD Card Connect device with power source as the picture below. You can insert a Micro SD card to expand the memory. Insert: switch off the device first. Gently push the card into the card jack until you hear a sound. Remove: switch off the device first. Gently press the card until you hear a sound. LED indicator stays orange, indicating that it is charging. • You can charge the device by connecting connector A with computer USB port.
Keyboard Home Page You could customize the wallpaper, widget, shortcut and the number of home pages. There are some function keys in the keyboard, some function keys can be used alone, but other function keys need to be used with ] key. [ Search Tool Bar Widget The same as Tab key of PC. Switch between small and capital letters. Back to the home page. Open the function menu. Open the search function. Combine with other keys with blue sign. 輸入法 ˙Input a space. ˙Select the symbol method with [ ] key.
Sign Alarm Battery indicator Run out of power Data synchronization USB connection Uploading Mute You can connect Wi-Fi Play MP3 Mail notification Insert SD card USB debugging Touch-control More Fully charged Charging Input method Mistake/caution Downloading Airplane mode Status of Wi-Fi Full storage Calendar event SD card is removed Data updating It is good for the device to use the provided stylus. Selection-tapping Choose the function on the screen and tap it gently with the stylus.
Insert the word Select words Long tap the words, a blue indicator will appear on the screen to help you select words, slide blue indicator to set the selected range. When you select words, you can perform copy, cut, past and other operations in the toolbar. Copy the selected words Slide to page up/down You can tap “DICTIONARIES" in toolbar to search the selected words in other dictionaries.
Wi-Fi & Networks The device provides the Wi-Fi function. Start Wi-Fi Start Wi-Fi in "Settings--Wireless & Networks". USB Computer Connection Please use specified USB cable to connect your device to PC. Connect ➀ Click Wi-Fi, the device begins to search available networks automatically. ➀ Use specified USB cable to connect the device to PC. ➁ Tap status bar to select "Connected as a media device", choose the Media device (MTP). ➁ Choose the Wi-Fi network you want to connect.
➂ Open the folder, to check and copy files to memory card. ➃ After data transfer completed, remove the USB connection. Common settings Date & time Set date, time, time zone, time format, date format in "Settings → Date & time" In order to avoid abnormal or missing data, please strictly operate the above instructions.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver.