H31IA User Manual Page 1 of 21
z z z Please read this manual before using your phone. All illustrations in this user manual are for illustration only and may not accurately depict the actual phone. We operate a policy of continuous development and reserve the right to make changes and improvements to any of the products described in this manual without prior notice.
Table of Contents 1. Safety information ............................................................................................. 4 2. Illustration of the phone and functions ....................................................... 13 3. Basic functions of the keys in idle ................................................................ 15 4. Installing the USIM card and battery........................................................... 16 5. Removing the USIM card and battery ...........................
1. Safety information Read these precautions carefully before using to ensure that you use the phone safely and correctly. The precautions listed here are intended to prevent injury to the phone user and to others, and to prevent unintended damage to property. z The designations below Indicates the severity of the injury or damage that may be incurred if the designated precautions are not followed and the product is used incorrectly.
Page 5 of 21
Page 6 of 21
Page 7 of 21
Page 8 of 21
Page 9 of 21
Page 10 of 21
Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately shielded. Please use phone at least 20cm or as far as you can from TV set, radio and other automated office equipment so as to avoid interference. Your wireless phone is a radio transmitter and receiver.
base station, the lower the output power. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified by the FCC that it does not exceed the limits established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) that conform to a uniform testing methodology determined by an expert standards body and then reported to the FCC.
2.
19 # key Press # to input # in idle 20 Microphone ------ Page 14 of 21
3.
4. Installing the USIM card and battery 1. Insert the USIM card into the slot. Please insert the card with the metal contact of the card facing downwards. 2. Attach the battery to the phone shown as below. 3. Attach the battery cover to the phone shown as below. Notice: You must use the original battery. 5. Removing the USIM card and battery 1. 2. Power the phone off. Remove the battery cover shown as below.
3. Remove the battery shown as below. 4. Pull out the card from the slot in the direction indicated by the arrow. 6. Installing the microSD Card 1. 2. Power the phone off and remove the battery from the phone. Insert the card into the slot in the direction indicated by the arrow.
7. Removing the microSD Card 1. 2. Power the phone off and remove the battery from the phone. Remove the card from the slot in the direction indicated by the arrow. Notice: Don’t remove the microSD card when functions related to the card are being executed.
8. Powering the phone on/off To power the phone on, press and hold [End] key when it is off If handset lock is set on, you are required to enter the password. The phone password is preset to “1234” for your convenience. If the USIM card is inserted in the phone and the relevant PIN protect is set on, you are required to enter the PIN code. If you input wrong PIN codes three times in a row, you need to input the PUK code. Both the PIN and PUK code are provided by the network operator.
Do you press [End] key long enough? Is the battery installed correctly? Unable to make a call Is the phone outside of the service area? Is the number you dial correct? Is the phone outside of the service area? Communication interrupted suddenly Is the battery power low? Charge Please charge the battery Is the power cord plugged to the phone correctly? The signal will interrupt when the phone switch between 2 cell station. Please move in low speed. Please plug the power cord to the phone correctly.
R&TTE Declaration of Conformity We, Inventec Appliances (Jiangning) Corporation 113, Jiangjun Road, Jiangning Economic and Technological Development Zone, Nanjing 211153, P.R.China declare under our sole responsibility that the product: Product Name: GSM/GPRS/EDGE Tribands/WCDMA Digital Mobile Phone with Bluetooth Product Model: H31IA to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC).
