User’s Manual XC2907-A Portable Reader Invengo Information Technology Co., Ltd.
Thank you for using Invengo’s RFID products! We are very glad that you chose this XC2907-A portable reader. We hope that the equipment can facilitate your work. The picture is for reference only and the physical product shall be subject to.
Foreword This manual applies to the following model: XC2907-A portable reader. This manual provides information on the use, maintenance and other features of the product for the product users and maintenance personnel. or trademark belongs to Invengo. All instructions and descriptions of product features and functions in this manual, as well as other information, are up-to-date and valid information. All information is accurate when printed.
Content 1. Product overview ........................................................................ 1 1.1 Product profile ................................................................................................... 1 1.2 Main usage and application scope .................................................................. 1 1.3 Working environment and conditions ............................................................. 1 1.4 Safety and protective measures ...........................................
.6 Instructions for Bluetooth ...............................................................................11 5.7 Instructions for GPS ....................................................................................... 12 5.8 Instructions for barcode module ................................................................... 12 5.8.1 Technical specification and support format for barcode engine ........................... 12 5.8.2 Barcode reading of demo software ......................................
7.6 Configuration password ................................................................................. 25 7.7 Configure lock status ...................................................................................... 26 7.9 EAS logo configuration ................................................................................... 27 7.10EAS Monitoring configuration ....................................................................... 28 7.11EPC filter ...............................................
1. Product overview 1. Product overview 1.1 Product profile Welcome to use XC2907-A portable reader. This portable reader is a new portable reader developed by our company in combination with the needs of IOT application scenarios. This product is an intelligent and multi-functional UHFRFID tag reader with fast processing speed, good portability and high functional integration. Figure 1-1 XC2907-A portable reader 1.
2. Performance parameters Storage humidity: 5%-95% (non-condensing, +25℃) 1.4 Safety and protective measures When this reader works (radiated microwave), don't aim at people and animals for a long time! Before using, please refer to the contents in the precautions. Any radio transmission equipment, including this equipment, may interfere with the work of medical equipment without proper protection. If there is a problem, consult the manufacturer of the medical equipment concerned.
2. Performance parameters Processor Memory Operating system 8-core 64-bit processor System memory: RAM: 4GB+ROM: 64GB (Standard configuration) Android 10.0 Main battery: Polymer lithium ion 3.7V 4900mAh/9000mAh Adapter: AC input: 100V~240V/50Hz~60Hz Power supply DC output: DC5V/2A Battery life: More than 14 hours for normal use, more than 200 hours for standby mode Working state: Real-time monitoring of battery voltage, residual power and charging status Operating environment: Android 10.
2. Performance parameters Support protocol: IEEE802.11a/b/g/n Communication rate: 2.4GHz and 5GHz dual-band Wi-Fi Function Transmission distance: ● Indoor 20m (No obstacles) ● Outdoor 50m (No obstacles) Bluetooth V4.
3. Dimensions and weight Internal expansion External port Support MicroSD/TF card extension and 256GB at most Type-C interface Power input port Working temperature: -20℃~50℃ Storage temperature: -20℃~70℃ Applicable environment Accessories Humidity: 5%-95% (non-condensing, +25℃) Vibration resistance: GB/T 2423.10-2008; Acceleration 4.9m/ s2; Frequency range 5Hz-100Hz Driving amplitude (peak mm) 25/f(f=5Hz~10Hz), 250/f2(f=10Hz~100Hz) • Power adapter (DC 5V/2A) • USB cable 3. Dimensions and weight 3.
4. Structural characteristics and operating principle 3.2 Weight XC2907-A portable reader has a delicate appearance and light weight. The machine weight is about: 650g (related to the quantity of optional modules). 4. Structural characteristics and operating principle This chapter mainly details the composition of XC2907-A portable reader, the internal structure of components and the working principle and interface description of each module. 4.
4. Structural characteristics and operating principle 2.RFID module The external UHF-RFID module is adopted for XC2907-A portable reader; 3.Battery The battery is integrated with the rear cover and SIM card may be placed inside the tube holder on the side of the battery. 4.Type-C interface Power input port, which also supports OTG functions, can be used for data exchange between different devices or mobile devices. At the same time, it has the charging function. 5.
5. Common functions and settings "shutdown" is selected, the screen will be completely extinguished and the system will be turned off. If "restart" is selected, the screen will be briefly closed and then enter the boot screen. [Reset operation]: If the device crashes and any keystroke operation does not respond, you may need to reset and restart the device. Operation methods: Pressing the device power key for more than 10s, the system will automatically restart. 5. Common functions and settings 5.
5. Common functions and settings 5.2 Backlight regulation In the use of native equipment, users can set the backlight brightness of the screen as needed, i.e. "menu "→ "settings"→"display "→"brightness". The brightness of LCD screen is regulated by moving the slide bar icon. See the details in Figure 5-2. Figure 5-2 Brightness control 5.
5. Common functions and settings 5.4 Instructions for All-Netcom Network (data) This reader supports all-Netcom network (data), thus extending the WWAN transmission function. The following is an introduction to common operations: ① Preparations: Properly insert a valid SIM card into SIM card slot in the handset battery compartment. ② Connection settings: Back to the main interface and scroll down the screen, it will see the automatic acquisition of the network connection.
5. Common functions and settings Connection settings: After opening Wi-Fi, click WLAN below the icon, enter the connection interface, click Wi-Fi name to be connected, enter the password and finally complete the connection settings, as shown in Figure 5-6: Figure 5-6 Wi-Fi connection setting 5.6 Instructions for Bluetooth This equipment configures Bluetooth.
5. Common functions and settings Figure 5-8 Bluetooth connection 5.7 Instructions for GPS GPS opening method of this equipment is: Click the screen on both sides of the main interface, click "position information" button to successfully open GPS function. The interface is shown in Figure 5-9. Figure 5-9 GPS Opening 5.8 Instructions for barcode module 5.8.
5. Common functions and settings 1D code system: Code39, Code93, Code128, Codebar, EAN-13, EAN-8, UPC-A, UPC-E, ITF14, UCC/EAN-128, ITF25, Matrix25, EAN-128, ISBN, etc. 2D code system: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QRcode, MicroQRcode, Aztec, MaxiCode, PostalCodes, USPostNet, USPlanet, UKPostal, AustralianPostal, JapanPostal, DutchPostal, etc. 5.8.
6. Introduction for RFID module Brightness, resolution and screen capture can be adjusted. At the same time, the camera supports automatic focusing and flash function. Click the camera to take photos. 6. Introduction for RFID module 6.1 Description of RFID module 6.1.1 Module instruction This RFID module can read the tags manufactured by different manufacturers that conform to EPC Global UHF Class 1 Gen 2/ISO18000-6C and ISO180006B protocols. It is suitable for mixed use of different protocols. 6.1.
6. Introduction for RFID module ● 6B tag data capacity supported: Tag ID maximum capacity supports 8 bytes. The maximum capacity of user data field supports 216 bytes. The tag capacity can increase with software upgrades. This list is used for reference only. Introduction to TID: TID (Tag Identifier) is a sign of identity distinction between tags.
6. Introduction for RFID module II. Startup mode: Click on the "InvengoDemo" icon on the system main interface to start the demo program. As shown in Figure 6-1: Figure 6-1 Main interface of XC2907-A portable reader 6.3.
6. Introduction for RFID module Notes: After Demo is turned on, only when the main page of the demo software is pressed, can the card reading operation be carried out or the card reading operation be stopped. The other interface side keys are invalid. 6.4 Main operating instructions for demo software 6.4.
6. Introduction for RFID module 2) Prompt tone: Check to open the card reading sound of handset. 3) RSSI: Check to display RSSI value. 4) Operation type: Set the card reading type. Option Single Cycle Description After opening the reading card, read the tag only once. After opening the reading card, read all tags in cycles. 5) Tag type: Set the type of read tag.
6. Introduction for RFID module Figure 6-5 Power Setting 1) Configuration: Save the antenna power being set. 2) Inquiry: Inquire the antenna power that has been set. 3) Antenna: The power varies as per the hardware. 6.4.3 Tag filter configuration The mode to enter the tag filter configuration is "Menu" and "Tag Filter Configuration." The detailed introduction can be shown in Figure 6-6: Figure 6-6 Tag Filter Configuration 1) Configuration: Configure as per the interval time that has been entered.
6. Introduction for RFID module 6.4.4 Search the tag The mode to enter the search tag is "Menu" "More," the detailed introduction can be shown in Figure 6-7: Figure 6-7 Search Tag 1) Start: Start to search the tag 2) Type: The search location is TID or EPC. 3) First address: Search the first address of the tag. 4) Match data: The content to search tag. 6.4.
7. Tag operation 1) Configuration: Save the parameter being set. 2) Inquiry: Query the parameters that have been set. 3) Session: Set the session types, and the session types fall into S0, S1, S2, S3. 4) Logo: Set the logo, the logo has A symbol, B symbol, A&B symbol. 6.4.
7. Tag operation Figure 7-1 Tag Operation 1) After reading the tag, click the tag to be operated, and enter the tag operation interface. 7.1 Writing EPC The entry mode of writing EPC is "tag operation" and "writing EPC", the detailed introduction can be shown in Figure 7-2: Figure 7-2 Writing EPC 1) Write in: Write EPC as per the input content. 2) Access password: Enter the tag access password. 3) EPC Length: Enter the length to be written. 4) EPC data: Enter the content to be written.
7. Tag operation 7.2 Read user field data The access method of reading user data field is "tag operation" and "read user data field". The detailed introduction can be shown in Figure 7-3: Figure 7-3 Read User Data 1) Read: Read the data pursuant to the filling content. 2) First address: Read the first address of the user field. 3) Length: The length to be read from the first address. 4) Data: The data content to be read. 7.
7. Tag operation 1) Write in: Write user field as per the input content. 2) Access password: Enter the tag access password. 3) First address: Enter the first address for writing. 4) Length: Enter the writing length. 5) User data: Enter the content to be written. 7.4 Writing BANK The entry mode of writing BANK is "tag operation" and "writing BANK," the detailed introduction can be shown in Figure 7-5: Figure 7-5 Writing BANK 1) Write in: Write pursuant to the input content.
7. Tag operation Figure 7-6 Wiping BANK 1) Erasing: Wipe as per the input content. 2) Access password: Enter the tag access password. 3) Operating area: Select the wiping area, EPC, TID or user field. 4) First address: Enter the first address for wiping. 5) Length: Enter the wiping length. 7.6 Configuration password The mode to enter the configuration password is "tag operation" and "configuration password".
7. Tag operation 2) Configuration type: Choose to configure access password or destroy password. 3) Access password: Input the original password. 4) New password: Enter the password to be configured. 5) Confirm your password: Repeat the new password. 7.7 Configure lock status The mode to enter the configuration lock state is "tag operation" and "configuration lock state.
7. Tag operation 7.8 Inactivation tag The entry mode of inactivation tag is "tag operation" and "inactivation tag," the detailed introduction can be shown in Figure 7-9: Figure 7-9 Inactivation Tag 1) Inactivation: In accordance with the input information, the tag is inactivated. 2) Inactivated password: Enter inactivated password. 3) EPC: Enter the EPC to inactivate the tag. 7.
7. Tag operation 1) Configuration: Configure the EAS logo configuration as per the input content. 2) Access password: Enter the tag access password. 3) Operation type: Carry out configuration or cancellation. 7.10EAS Monitoring configuration The access mode of EAS monitoring configuration is "tag operation" and "EAS monitoring configuration," the detailed introduction can be shown in Figure 7-11: Figure 7-11 EAS Monitoring Configuration 1) Start: Start the EAS monitoring configuration.
8. Precautions 1) Configuration: Configure pursuant to the input content. 2) Cancellation: Cancel the EPC filter setting. 3) EPC: Enter the matching data (12 bytes). 4) Matching mask: Enter the matching mask (12 bytes). 8. Precautions 8.1 Description of use of power saving To enhance the endurance of the whole machine and ensure that the users can better control the long-term operation of the communication module, the equipment adopts a flexible power control scheme.
9. Daily maintenance and troubleshooting 8.3 The correct mode to replace the battery When the device's battery needs to be operated, the device should be put into the standby state first, and then replace the battery. The battery shall be replaced within 30 s, and the time and date will not be lost provided that the device is restarted. In case that it times out, the time and date set by the device will be lost. 9. Daily maintenance and troubleshooting 9.
9. Daily maintenance and troubleshooting the battery with wires or other metals, avoid transporting or storing the battery with necklaces, hairpins or other metal objects; 9. Don't disassemble the battery or cause the battery to short circuit; 10. Don't hit against the battery or hit against the battery with sharp objects. 9.
9. Daily maintenance and troubleshooting 2. Check whether the PC machine connects to the handset through the USB cable. Provided that there is a connection, please hold on for a few minutes; Maybe the battery level is too low, and the battery needs to be charged for a while before displaying the electricity. ● Can't read the tag Please confirm that whether the electronic tag is in the effective range of the reader; Please confirm whether the space RF signal interference problem exists.
9. Daily maintenance and troubleshooting 9.3.1 Signal interference problem Signal interference refers to the RF signal bringing interference upon the information exchange between portable reader and electronic tag. Signal interference can severely reduce the ability of portable reader in reading electronic tag data information.
9. Daily maintenance and troubleshooting In general condition, it is impossible to accurately predict the performance of portable reader system performance in any given environment due to the complexity of electrical magnetic radiation, including the frequency stability of signal source, directional diagram and sidelobe problem of antenna, ambient environment, etc.). But, some suggestions given below can guide the optimization of system performance in specific environment and application conditions.
10. Transportation and storage 10. Transport and storage 10.1 Transport requirements XC2907-A portable reader conforms to the requirements as specified in the relevant standards of highway, railway transport, aviation, water transport, etc. 10.
11. Packing and unpacking inspection 11. Packing and unpacking inspection 11.1 Packing descriptions XC2907-A portable reader adopts box packaging and can use the large-transport turnover box. 11.2 Unpacking Please unpack before properly saving packing box and packing materials to facilitate the future storage and transport. Please seriously check whether product and accessory are complete in accordance with the container loading list of product.
12. After-sales services 12. After-sales service method 12.1 After-sales service Users shall contact our company's Customer Service Center in case of meeting the indecisive problems when using the portable reader.
Regional Sales Offices APAC Sales: Invengo Technology Pte. Ltd. Korean Sales: AMERICAS Sales: EMEA Sales: 10 Kallang Avenue #05-15 Tower 2, Aperia Singapore 339510 Tel: +65 6702 3909 Email: sales@invengo.com Website: www.invengo.cn 1011 S HAMILTON RD Ste 300 CHAPEL HILL NC 27517-4409 USA Tel: +1 919 890 0202 Email: sales.americas@invengo.com 30F ASEM Tower 517 Yeongdong-daero Gangnam-gu, Seoul 135-798, Korea Tel: +82 2 6001 3525 Email: sales@invengo.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.