Installation Instructions

CONFIDENTIAL AND PROPRIETARY – Intuitive Surgical Inc.
Prior to use, use ACCS to verify that this is the current revision Template File: 853244 Form_Template Rev D.doc
DOCUMENT: 818385-02
REVISION: A
PAGE: 1 of 4
TITLE: Installation Instructions for RFID
Module ACCRX02
The RFID module (Model: ACCRX02) is used with the host devices (model PS4000 and
PS4200) and as such, required testing and approval is completed. Use with any other
host device may or may not require additional testing and approval. Consult Hardware
Compliance Engineering for assistance.
The RFID module includes the main block (P/N 318215), the top plate (P/N 318216),
the ACCR PCA (P/N 353240-08), ACCRA PCA (P/N 343460-05), the pod support (P/N
318273), and board support (P/N 318230).
For instruction on how to install RFID module to the host device (PS4000 and PS4200),
refer to Manufacturer Process Instruction, Carriage, Housing Assembly,USM,IS4000
(P/N 1001924) and Manufacturer Process Instruction, Carriage Integration,USM,IS4000
(P/N 844505-01). USM = Universal Surgical Manipulator (aka. Robot Arm).
The label (P/N 510196-02) contains FCC ID (2AAZF-ACCRX02), IC ID (11508A-
ACCRX02), and RFID Model name (ACCRX02) for identification. See Figure 1.
The label having white background with black text, is affixed to the module in a manner
such that it will remain adhered to the module during the expected life of the product.
The minimum size of the font is 4 pt. The label is applied on the main carriage block
near the ACCR PCA location. See Figure 2.
Figure 1: Label of RFID module (P/N 510196-01)
Figure 2: Location of Label of RFID module