User Manual INTRANAV RTLS INTRANAV NODE (IN5000) INTRANAV NODE with Wi-Fi (IN5200) V1.
INTRANAV RTLS NODE (IN5200) - Quick Guide IntraNav GmbH Frankfurter Str. 27 65760 Eschborn, Germany Phone +49 6196-20471 80 Fax +49 6196-20471 89 Email: info@intranav.com Internet: www. IntraNav.com Company address: Frankfurt am Main (HRB 92924) board of management Andreas Radix Ersan Günes Gonzalo Ibarra © Copyright 2020, IntraNav GmbH This work is protected by copyright. Its use outside the narrow limits of copyright law is not permitted without the publisher's consent and is punishable by law.
Content Content 1 Legal information .......................................................................... 5 2 Overview ...................................................................................... 8 General ................................................................................................ 8 Scope of delivery and accessories ...................................................... 8 Power supply.....................................................................................
V1.0 Legal information 1 Legal information Warnings This manual contains instructions that you must follow for your personal safety and to avoid damage to property. The notes are highlighted by a warning triangle and are for your personal safety. Notes on sole property damage are without a warning triangle. Depending on the hazard level, the warning notes are shown in decreasing order as follows. DANGER: means that death or serious injury will occur if the appropriate precautions are not taken.
Legal information .0 If several hazard levels occur, the warning note for the highest level is always used.
V1.0 Legal information Disclaimer We have checked the contents of this publication for compliance with the hardware and software described. Nevertheless, deviations cannot be excluded, so that we cannot guarantee complete conformity. The information contained in this publication is checked regularly and any necessary corrections will be included in subsequent editions. 7 IntraNav GmbH Frankfurter Str. 27 65760 Eschborn Phone +49 6196-20471 80 Fax +49 6196-20471 89 info@intranav.
Overview .0 2 Overview General The INTRANAV NODE (IN5200), is a permanently installed antenna system for real-time indoor positioning. The NODE, also called anchor, receives the ultra-wideband (UWB) signals of the TAGs and transmits them to the INTRANAV backend where they are processed to position signals.
V1.0 Overview Fields of application The device is designed to operate in an environment of 10°C to +50°C. For this reason, it is essential to ensure that the INTRANAV NODE (IN5200) is never used outdoors, as moisture or water can cause a short circuit. If you want to use INTRANAV RTLS NODEs outdoors, there is a special outdoor version available. Product dimension Dimensions approx. 150 x 150 x 30 (mm) & weight approx. 180 (gr.
Installation, commissioning, maintenance and safety .0 3 Installation, commissioning, maintenance and safety General notes ▪ Before installing the units, read carefully all the points listed in "3. Installation, commissioning, maintenance and safety" to ensure proper installation and operation. ▪ The devices can only be used in connection with the INTRANAV RTLS solution.
V1.0 ▪ Installation, commissioning, maintenance and safety The devices must be installed in accordance with the currently prevailing BG regulations "Electrical installations and equipment" (BGV A3). The devices must be mounted in such a way that they can be accessed at any time (opening the housing cover) to enable maintenance work to be carried out later. Connection of cables and wires ▪ When connecting the cables, always ensure that they are in perfect condition and not damaged.
Installation, commissioning, maintenance and safety .0 CAUTION: The supply voltage of the device must not exceed the following values: U <36V; I < 1.5A; P < 2W Ethernet ▪ When installing and connecting the Ethernet connection, the respective valid general conditions and their legal basis must be observed. ▪ The Ethernet connection is connected to the Ethernet socket of the device. The cable must be assembled into the RJ45 plug before connecting it to the socket.
V1.0 Installation, commissioning, maintenance and safety ▪ You must configure the INTRANAV NODE accordingly before configuring it on the INTRANAV.IO platform. ▪ An INTRANAV NODE is ready for operation when the status LED is permanently lit. ▪ The LED behavior is described as follows: Display Status LED Description Lights green Supply voltage OK Flashing green Connection to network and INTRANAV.
Installation, commissioning, maintenance and safety ▪ ▪ .0 Unauthorized opening of the devices will result in the exclusion of warranty and liability of IntraNav GmbH. Never use liquids, abrasive cleaners, alkaline cleaning agents, sharp or abrasive tools to clean the housing. 14 IntraNav GmbHFrankfurter Str. 2765760 Eschborn Phone +49 6196-20471 80Fax +49 6196-20471 89info@intranav.
V1.0 Technical data 4 Technical data Property Description Radio procedures IEEE 802.15.4-2011 UWB (Ultra Wideband) Frequency range UWB Channel 5 (6.4GHz) Transmission power -34 dBm Antenna Omnidirectional integrated antenna (max. 70m range) Sensors 3-axis acceleration sensor Integrated temperature sensor Integrated air pressure sensor Supply voltage Supply voltage by means of - Power-Over-Ethernet - 9-36V DC - USB-C Ethernet RJ45 Ethernet 100Mbit/s (full duplex) DHCP Yes IEEE 802.
Marking .0 5 Marking INTRANAV NODE Front panel INTRANAV NODE Back panel With NODE ID and MAC address on label Wi-Fi (IN5200) Non Wi-Fi (IN5000) 16 IntraNav GmbHFrankfurter Str. 2765760 Eschborn Phone +49 6196-20471 80Fax +49 6196-20471 89info@intranav.com_COPY17 Commerzbank FrankfurtIBAN DE91 5004 0000 0571 9141 00BIC COBADEFFXXX Commercial registerRegistral court Frankfurt a. M.
V1.0 Approvals 6 Approvals EU Declaration of Conformity The current EU Declaration of Conformity for this product is available on request or by e-mail to info@intranav.com.
Approvals .0 Technical documentation for the assessment of electrical and electronic equipment with regard to the restriction of hazardous substances RED (Radio Equipment Directive) Health and safety protection The products described in this document meet the requirements of the tightened standards: Art.
V1.
Approvals .0 - Harmonised EN covering essential requirements under article 3.2 of the EU directive 2014/53/EU; Part 2: Requirements for Ultra Wide Band site surveillance FCC This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
V1.0 Approvals RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.
Recycling and disposal .0 7 Recycling and disposal The products are low-polluting, recyclable and meet the requirements of the WEEE Directive 2012/19/EU for the disposal of waste electrical and electronic equipment. Do not dispose of the products at public disposal points. For environmentally friendly recycling and the disposal of your old device, please contact a certified disposal company for electronic waste or your IntraNav contact person. Please note different country-specific regulations.
V1.0 Troubleshooting 8 Troubleshooting If a fault occurs, inspect the unit for the following faults and take appropriate action. If other undefined errors occur, contact IntraNav support. (www.IntraNav.com) F: NODE Status LED is not lit. A: Check the power supply F: NODE Status LED lights red or yellow A: Refer to the instructions for the error code Q: NODE is not listed among the network devices in the platform. A: Check the network connection and settings.