FCC ID:2AW8RCR400 IC:26378-CR400 ALPHAWORKS SMART CORD REEL OPERATOR' MANUAL
TECHNICAL DETAILS Item No. AWG Length (ft) Volt (V) Ampere (A) GUR052 12 65 125 15 14.173 14.42 10.22 14.637 8.78 14.464 7.80 Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing. 4- 0.413 12.
FCC Matters Needing Attention This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
INSTALLATION 1. Unpack and inspect reel for damage. Check for completeness. 2. The cord reel must be installed in premises comforming to current regulation and standards covering systems and work environments. 3. Secure the cord reel to the wall and the ceiling according to the installation diagrams.Using screw anchors or suitable screws which must be fitted in the holes in the brackets. 4. The appliance can also be used on the ground. The cord reels can be placed in place as needed.
CHECKLIST BEFORE USING THE DEVICE 1. In order to power up the sockets, first click each button, and check whether the indicator lights are working. 2. Your smart phone or tablet should have connected a 2.4G WIFI with internet. 3. The device only supports 2.4G network. Please don’t connect to a 5G network or hybrid network. 4. Enter correct WIFI passwords. Make sure that your WIFI SSID and passwords don’t contain special characters. 5.
6. Control device 1. Tap to enter it’s control page, click on the button for ON / OFF operations. Each socket can be independently controlled and customized through the app. And individually control each socket using sepatate buttons. Rename what you want by click the icon. 2. In the control page you could click on the Timing & Countdown etc., for regularly operations. Stopped Retract Button Socket On/Off Timing & Countdown MAINTENANCE 1. Make sure the Cord is in proper working order. 2.
Great Circle USA Support Line: 1-866-493-0524 alphaworks@greatcircleus.com www.greatcircleus.